Excel 2010 :: Worksheet Move / Copy Function And Paste Special / Columns Widths
Mar 18, 2014
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
I am using excel 2010 and cant see the paste special options in any of the worksheets. If I restart my laptop then it shows up. I noticed that after opening Internet explorer, the options disappear once again and restarting the system brings them back.
I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
Excel 2002.I have data in columns A and B on sheet 3, starting at row 100. The total number of rows of data is variable (max is 50 rows). I want to take the values in A100:B100 and copy them from Sheet3 and paste values transposed to SheetTL Range C1:C2. I have started to write the following code but as you can see I will have to repeat the code upwards of 50 times. It seems I should be able to do a COUNT function to see how many rows of data exist and then somehow loop the code to copy the data from each subsequent row that many times, but how to put that together.
Sheets("Sheet3").Range("A100:B100").Copy Sheets("TL").Range("C1").PasteSpecial Paste:=xlPasteValues, Transpose:=True ActiveSheet.PrintOut If Sheets("Sheet3").Range("A101") = "" Then
When I copy a cell with CTRL-C and paste elsewhere, a small clipboard pop-up appears to give paste options. The pop-up is the size of an average 'starter' cell. I find it a nuisance as it always covers a cell I might want to paste into, but I cannot see that cell anymore because of the pop-up. How can I get rid of the pop-up?
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.
There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).
I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I am trying to copy a file, rename it, and save it to a new folder. I keep getting a "Compile Error ; Syntax Error" at line FileCopy (ImagePath & oldName, NewPath & newName). I am using Excel 2010.
FileCopy (ImagePath & oldName, NewPath & newName)Sub RenameFiles() 'Renames file based on "sheet 1" - Column 1 Old file name - Column 2 New file name Dim oldName As String Dim myfile As String Dim newName As String Dim ImagePath As String Dim NewPath As String
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
Got a bit of an issue with using the paste special function. I am trying to record a macro that would copy a group of cells that are verticle, and then paste them onto a new row in a different sheet.
I have done this in the past by enabling the record macro function and inserting a new row going back to the sheet with the data selecting the data copying it, and then selecting pasting area using paste special and enabling the "Transpose" box.
Although today i found this didin't work in fact it (this is the best i can describe it) merged each cell with the cell below givng a type of square function as can be seen below.
to complete the field using the other sheets value if it's not empty, where $K$7 references a worksheet name based on the previous month.
It's working just fine, but I want to copy and paste it into other cells having the referenced cell, C45, change as I move it around the sheet (if I copy and paste it 3 cells to the right it would become =IF(INDIRECT($K$7&"!C48")>"",INDIRECT($K$7&"!C48"),"").
I haven't been able to find a way to make the C45 cell reference dynamic while copying and pasting. It would save me a ton of time if I could.
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
I want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
[Code] .....
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6 The first row in Main is 4
Is it possible to create a User Defined Function that replicates the "Copy/ Paste Special" function? I tried recording a Macro and using that as the basis for the User Defined Function but it didn't work.
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
how can i do in one macro paste special function but from 2 interfaces. I want to paste special - value to excel sheet by button. I have this 2 types of macro, but i don know how can i get it together.
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1". I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click() If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone End If End Sub