Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E----- Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am trying to use a conditional macro to move data around in a spreadsheet. Is there a way to use an IF AND conditional statement in a macro? As an example:
Range Select ("M3")
' THIS IS THE LINE I AM HAVING A PROBLEM WITH If Selection("M3").Select And Selection("N3").Select = "1" Then
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have two sheets and need information from Sheet titled Add-Del_chng positions to be moved to the sheet titled Cost Distribution.The issues here are :
1. The values in Cells A through J should be moved only if col Z value is 'hard coded"
2. The values should be moved to the 13th row.
3. This should happen every time the value is input into col Z of sheet titled add_del_chng.
Currently the macro does not run unless I go into the code and press play. I need this to happen automatically.
I am attempting to write a macro so that when a user selects enters a particular selection in a cell, it will automatically move the entire row down to the last row and shade it in a different colour.
I have a spreadsheet in which the user will respond to questions using "T" for "True" or "F" for "False". If there is a certain number of T's I would like the macro to take the user to one sheet in the workbook or if there are a certain number of F's I'd like it to take the user to another sheet in the workbook.
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer Dim counter2 As Integer Dim id As Double Dim id2 As Double Dim palletnum As Integer
I want a sheet to copy and paste into another worksheet, I have that code and its working fine, but what I also want to do is for the sheet to be protected,so the code would be, copy, unlock, paste, lock, save.
Here is the code I have so far. I know i have to include ActiveSheet.Unprotect "passowrd" ActiveSheet.Protect "password", but I dont know where to include that last part of the code.
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
I have a data sheet with large macro for processing the data... the last piece of the puzzle is to cut the entire row and paste it into the next available row in another sheet within the workbook if the value in column N is >0. I have tried a few things that I have found out in various places on the net but i seem to always come up with a loop or error of some sort.
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I am working on Excel 2000. I am creating a protected worksheet which will have conditional formatting and validation on manual input cells (formatted to light yellow). I want to make sure that people do not accidently forget and paste data into those cells. I read up on solutions from this thread; [url] and most of it seems to be more complex than what I needed (and I couldn't get it to work)
I copied some code from this website post [url] to my worksheet.
It works fine if the Validation criteria is set up simultaneously (i.e. it's all the same) but does not work if the columns have different validation criteria. How can I modify it to work under those conditions? I have included two workbooks, one in which the val critieria is identical (and it works) and one in which it varies between columns (and it doesn't work). I also noted that if I modify the one that doesn't work to make it homogenious, it still doesn't work unless I go back and highlight all and reformat that way.
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows: *CUSTOMER *CONTACT *MACHINE TYPE *SERIAL NUMBER *QUOTE NUMBER *ORDER NUMBER
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
So ive got this macro that will find the text "SEP" in the active worksheet and paste it into the new worksheet. The Macro looks to see if a row contains "SEP" and copy that whole row and paste it into the new worksheet. I have over 5000 rows in column A that contains "SEP0014A9713685" and "SEP0014A981785C" So they are all different so its not just finding "SEP" So i need some type of Contains "SEP" for column A. This is the macro i have right now.
' Devices that contain SEP Dim strArray As Variant Dim wsSource As Worksheet Dim wsDest As Worksheet Dim NoRows As Long Dim DestNoRows As Long Dim I As Long
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
I have a list of asset data (columns A:Z and over 20,000 rows).
I want a macro to find the word TAG in column F then cut off the entire row for all that meet the criteria and paste in another sheet. So I can see both sheets.
I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.