I would like to create a message box that will tell the user if the input they've loaded is valide base on two criteria.
1. The sum of the cells from O2 to O3000 is equal to zero.
2. There are no zeros in the cells from B2 to B3000.
I have a userform that has validations in it. One of the validations is to ensure the user has entered in a correct date. Right now if the user has the correct date in the form, but decides they no longer want to add any data into the spreadsheet using the userform, they can simply click the Close Form button at the bottom of the form and the form will close out.
I just discovered however that if the user inadvertently put in an incorrect date and then attempted to close the form, the validations will not allow the user to close the form until they have corrected the date. I would like to set up my close form button to close the form no matter what data has been entered into the form. Basically have it so the close form button overrides any validations within the userform coding. Currently I only have unload me within the cmdClose_Click() sub routine, It looks like this:
[Code]....
Could I use something to the effect of clearing all fields when the close form button is clicked...
[Code] ....
Would this work???
I have a database in excel format containg 20,000 + rows with multiple columns, one of the columns contains web addresses in the format [url].
I have a list of around 3.500 web addresses that are no longer valid ie thay dont work, I want to filter the original list to delete all the rows that contain an invalid web address including all the other data in the row, does anyont know a way to do this without having to do it manually one at a time?
I just have a basic data validation list. I used "List" and checked the right boxes and the file has been working before. Now the same file does not stop the user from typing in anything.
I re-did the same data validation in a new file and it works. Was there something in the file that prevents it from working?
I have Excel 2007. I saved in both xlsx and xlsm formats
I have a list drop down that is dependent on a first list. The first list has numbers, spaces, and "-" at the beginning I need to get rid of to make it a valid name to reference. The "Substitute" function can't be nested enough times to make this work for me since I have a fairly lengthy list for the independent column which has differing numbers at the beginning. The first two examples of the independent drop down (which would dictate the second dependent column and drop down) are:
00 - Preconstruction
01 - General Conditions
I would like to name these something like "Preconstruction" and "GeneralConditions" for valid naming convention.
Second thought:
If character removal isn't the most efficient or possible at all, is there a combination of reference functions that could make this work? Ultimately I want to use these 2 drop downs for reference functions on a second worksheet.
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
Any Excel document that I try to open, I get the message
"XXXX.xls is not a valid Win32 application."
However, if I open Excel and then open the application it works.
It initially started on my XP PC. I uninstalled Office and reinstalled it...no change. Two weeks ago I upgraded to Vista(not for this problem)...no change.
How can I get the apps to open when I click on them?
When I insert a row into a worksheet (by selecting the row and then hitting ctrl+plus, or by going through the menu insert, row), a message pops up, as follows:
I created this worksheet from scratch and am not aware of any invalid reference.
I have a error with this code Row Invalid Qualifier
how can I qualifier Row
Private Sub CommandButton2_Click()
Dim Row As Double
Dim addItem As Integer
Dim count As Integer
count = 0
UserForm1.ListBox1.List(count, 0).Value = ""
ActiveCell.Value = ""
Sheets("Sheet2").Cells(1, 1)(Row.count, "A").End(xlUp).Offset(1).Value = ""
End Sub
I have 21000 E-Mail ID's
But Some have in Wrong Format, Now i want to know which one are InValid E-Mail ID's
Right Now i am Using thisISNUMBER(FIND(".",A2,FIND("@",A2)))
Formula
but its not Working Properly, It show True Even The EMAIL-ID IS WRONG.
See Below
Sheet3
image removed
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I've used a VBA procedure to pull stock price historical data from Yahoo. Something has changed something and now the procedure will not work. With a worksheet named 'Web Data', I execute the following procedure. I now get an error from Excel (2003) stating that "The file could not be accessed. Try one of the following: ...", and then "Invalid Web Query". Here is the code that I am using:
'e.g. pull Dow Jones data for Feb 14 thru Feb 15.
smo = 2 ' Feb
sda = 14 ' 14
syr = 7 ' 2007
emo = 2 ' Feb
eda = 15 ' 15
eyr = 7 ' 2007
fund = "^DJI"
Sheets("Web Data").Activate
Range("a1").Select
Selection.Clear
With Selection.QueryTable
.Connection = _
"URL;http:// finance.yahoo.com/q/hp?&a=" & smo - 1 & "&b=" & sda & "&c=" & syr _
& "&d=" & emo - 1 & "&e=" & eda & "&f=" & eyr & "&g=d&s=" & fund
.Refresh
End With
Running a worksheet with vba, at the start of the code I turn warnings off and at the very end of the code I turn them back on.When the routines complete a warning is raised:
A formula in this worksheet contains one or more invalid references.
Verify that your formulas contain a valid path, workbook, range name, and cell reference.
When I run Error Checking everything comes up clean.
Clicking on "Show Formulas" shows no formulas for there are no formulas on the sheet to show, just a chart, and clicking "Show Formulas" just turns my dates into serial numbers and screws up the display of the two comboboxes, messing the fonts and drop-down arrows, and since closing and reopening didn't revert the comboboxes back to normal I will now have to blow them away and resurrect them. I also see Show Formulas also messed up my command buttons. nice...
The only way I find to avoid the error is to turn Warnings OFF at the start of the charting routine and NEVER turn it back on.
I made certain that none of my names had any errors in them. Everything looks proper. So what next?
I fear something will create an error for me now along the lines of Murphy's Law
i keep getting errors when im trying to run this bit of code
View 4 Replies View RelatedWhat is the best way for my UDF to return an error to the calling worksheet if it detects an invalid parameter?
In the past, I have usually set a breakpoint so I could check the the values and the logic. Other times, I return an invalid result, like 0 or -1.
I am working on a UDF now that is called hundreds of times. The workbook is a work in progress so I am constantly making changes to the UDF and the calling cells. Periodically, I screw up and do something that causes every call to get an error (like divide by zero).
I am getting an invalid procedure call when the portion of the code that has the ASC function runs. The only change I made to the workbook was to increase the available rows that this macro is totaling from 150 to 300. If I don't increase the rows I do not get the error.
What this code is doing is grouping information from 20 different sheets and totaling them and placing the total in the correct group. Most of the totals will begin with a number, however there will be a small amount that will begin with a letter. The items with letters need to be grouped in the 17000 category.
Dim c As Range
Dim rng As Range
Set rng = Range(Cells(3, "R"), Cells(lastrow, "R"))
For Each c In rng
If c < 20 Then c.Offset(0, 1) = "01000"
If (c > 19) * (c < 26) Then c.Offset(0, 1) = "02000"
If (c > 25) * (c < 161) Then c.Offset(0, 1) = "02600"
If c > 159 Then c.Offset(0, 1) = WorksheetFunction.Text(c, "000") & "00"
If Asc(Left(c, 1)) > 58 Then c.Offset(0, 1) = "17000"
If c > 170 Then c.Offset(0, 1) = "18000"
Next c
I used to get this error when I accidentally tried to name two controls with the same name.
This time I had just highlighted a set of labels to increase the width from 96 to 108. It locked up with that Invalid property value error.
I just finished a revamp of my sheet (added 6 Columns and a UserForm) and was going to save it after this re-size was finished. OPPS!
Is there any way to salvage this update?
I am trying to create a macro to search through a workbook and delete "empty" cells, leaving just the range of cells with valid data. So far i've come up empty handed. I have attached a sample workbook with a spreadsheet on it that has the empty cells I speak of. Press CTRL+END to see where it takes you in the sheet and it will be well beyond the range of data I have inserted. The reason I need to do this is because I gets spreadsheets back from clients that need to be imported into SQL and it is very time consuming to have to go through each workbook.
View 2 Replies View RelatedMy goal to checkup/analyze our contact details database, to do that i have to manually tag the invalid entries ( blanks, 0, wrong cellphone format, x, NONE etc. ) for cellular phone field as " INVALID " and if the cellular phone format is correct we'll tag it as " VALID " ( please refer to my attach file ) i have to get this task as fast as i could and our database comprises of 200,000 imagine if i have to manually tag it even in batches i have to figure out how to automate this..but the filter function of excel seems to be lacking for me. if there's a way how to automate this with this function:
- define field to be filtered out as for this case ill define cellphone # format and tag it as " VALID "
- define field to be filtered out as invalid entries ( blanks, x , 0, numbers less than 10 digits, entries that are telephone format, NONE, /// , XX, aa, @ ) or any sort of entries that are not cellphone format
I'm trying to attach an Excel file but I keep getting a message stating it's an invalid file. I don't remember having trouble before attaching here, but I am now. What must I do?
View 9 Replies View RelatedI have a column of voucher numbers that is suppose to have only values 1 - 999999. How can I find one that has non numeric values or imbedded blanks?
View 4 Replies View RelatedWhy this doesn't work?
I get the error message: Invalid Next control variable reference
And it highlights the i in 'Next i'
[Code] .....
I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.
[Code] ....
Which is giving error .
superscript.xlsm
I am combining the information from multiple files--one per state, for several states--into a single large table so it's more easily reviewed. Each file has multiple worksheets, named for categories. The category/worksheet names are standardized, but not all worksheets are found in every file.
There is some overlap of items from state to state, so my macro copies key fields from each worksheet and pastes them into the new table and adds a column on the left with the name of the category/worksheet each item came from. It then removes any duplicates to create a list of unique items. Across to the right, the table has two columns for each state, one to show if the item exists there, and the other the date it was added.
In the final step I am using lookup formulas to populate the states columns, using the category/worksheet name from the left-hand column to identify which worksheet to pull from. When a worksheet doesn't exist in a source file, however, this creates an invalid reference.
Is there any way to use VBA to identify which worksheets are in a file so I can use the results in an IF/THEN statement to bypass any lines that would create the invalid references?
This error occured me, and i clicked "Debug" to see where was the error and i found a strange thing that i don't know how to solve it:
The line has the following
I am trying to get a combo box to work, but keep encountering the error "Invalid Property Value."
When the combobox entry is deleted and the user moves to the next text box in the userform, this error pops up which is very annoying. It also pops up when the word entered doesn't match, like it is supposed to.
I have MatchRequired set to True, because I want an error message to come up, but with my own error message like " That name doesn't exist, please try again ".
I can't figure out a way to ignore the "Invalid Property Value." error message, and show my own customized message.
I am receiving the error message Run Time Error '94' Invalid use of null when running my program.
here is the code where the error is being caused:
I have a macro that asks the user to enter a file name and have written a small function to search the name given to the file to find any invalid characters, trouble is I must be doing something wrong as I doesn't work. Everytime I write something in the box I'm told it's invalid, regardless of weather it actually is or not.
Function -
Compile Error: Invalid Outsid Procedure
I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.
Sheet 1 code as follows:
Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault
Sheet 2 code at follows:
Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select
[code]....
I am using some code I found on the internet, but I have made some samll changes to it and I am getting a Run-time error 481 - Invalid picture Some of the Pitures do load but some of them dont load.
Here is the code I am using
Code:
Public Declare Function URLDownloadToFile Lib "urlmon" Alias "URLDownloadToFileA" (ByVal pCaller As Long, _
ByVal szURL As String, _
ByVal szFileName As String, _
[Code].....
Code:
Sub ProtectAll()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
.Protect Password:="Password", AllowFiltering:=True
.EnableSelection = xlUnlockedCells
End With
End Sub
I am trying to get autofilter to be active when i run my protect macro.