Invalid Procedure Call Using ASC
Jan 27, 2008
I am getting an invalid procedure call when the portion of the code that has the ASC function runs. The only change I made to the workbook was to increase the available rows that this macro is totaling from 150 to 300. If I don't increase the rows I do not get the error.
What this code is doing is grouping information from 20 different sheets and totaling them and placing the total in the correct group. Most of the totals will begin with a number, however there will be a small amount that will begin with a letter. The items with letters need to be grouped in the 17000 category.
Dim c As Range
Dim rng As Range
Set rng = Range(Cells(3, "R"), Cells(lastrow, "R"))
For Each c In rng
If c < 20 Then c.Offset(0, 1) = "01000"
If (c > 19) * (c < 26) Then c.Offset(0, 1) = "02000"
If (c > 25) * (c < 161) Then c.Offset(0, 1) = "02600"
If c > 159 Then c.Offset(0, 1) = WorksheetFunction.Text(c, "000") & "00"
If Asc(Left(c, 1)) > 58 Then c.Offset(0, 1) = "17000"
If c > 170 Then c.Offset(0, 1) = "18000"
Next c
View 9 Replies
ADVERTISEMENT
Nov 7, 2007
This error occured me, and i clicked "Debug" to see where was the error and i found a strange thing that i don't know how to solve it:
The line has the following
View 10 Replies
View Related
Jan 10, 2007
I have some VBA that appears to work perfectly on the first run, but I get the following error if I run it again or any alternate runs;
Title: Error (App_WorkbookBeforeClose)
Number: 5
Message: Invalid procedure call or argument
The only way my code currently works is if Excel has just been launched. The VBA creates, saves and modify's files so I imagine it has something to do with the ThisWorkbook object when a file is being saved or closed. I have googled the error but didn't really get anywhere as it is pretty generic and seems to be returned for a number of Excel products.
View 2 Replies
View Related
Jun 25, 2013
When I step-through my code below, it always opens the first file in the directory "C:Pyramid Files", but when it comes back to the Pyramid Files sub after fully processing the first file via various other subs, the VB Editor apparently doesn't like something about this line: StrFile = Dir(), since it quits after "snapping-back" to the previous sub Initialize(). I have also tried StrFile = Dir, but that doesn't work either. I did Dim Strfile in the General Declarations. When I set Watches for Dir and Dir(), I get the value "Invalid procedure call or argument" for both, as if the directory function lost the value. I can't determine why this is happening.
VB:
Dim WSM As Worksheet, WSB As Worksheet, WS1 As Worksheet, [U]StrFile As String[/U], StrDirectory As String, ClientCode As String
Dim Filename As String, LastRowb As Long, LastColB As Integer, LastRow1 As Integer, NextRowC As Integer, x As Integer, y As Integer
[Code] .......
View 4 Replies
View Related
Aug 30, 2012
This error message in line vpp:
Invalid procedure call or argument
Code:
Function fn1(ByVal a, ByVal i, ByVal e, ByVal N, ByVal w, ByVal ta)
Pi = Application.WorksheetFunction.Pi
mhu = 398600
vpp = (mhu / Math.Sqr(mhu * a * (1 - e ^ 2))) * (-Math.Sin(ta * Pi / 180))
fn1 = 2 * vpp
End Function
View 9 Replies
View Related
Nov 13, 2009
I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate.
I dont understand why this seemed to work for months and now creates an error.
It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while.
Run-time error '5':
Invalid procedure call or argument
This section is in my personal.xls file in "ThisWorkBook" of personal.xls.
View 5 Replies
View Related
Jun 24, 2014
Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row
[Code] .........
View 2 Replies
View Related
Nov 6, 2006
I am using a procedure to loop through all files in a folder and am encountering an
Invalid procedure call or argument, error on the ChDrive line:
mypath = "\Eo1
_iSurveysNALCReturns"
ChDrive mypath
Is it something to do with the mypath syntax? Recently our drives have been reorganised. I used to just use "G:Surveys..." which always worked. Does anyone have any thoughts? I hope I've explained properly - you can probably tell I don't know much about this sort of thing.
View 5 Replies
View Related
Oct 4, 2006
I would like to apply different conditional formatting at different times with a click of a button. I setup a dummy and turned on the recorder and recorded this
Range("A7:N7").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$C7=1"
Selection.FormatConditions(1).Interior.ColorIndex = 37
Range("A1").Select
End Sub
I tried changing to this
'/Conditional Format - OTHER EXPENSE B/L
Set rngConditional = wsData.UsedRange
With rngConditional...............
View 9 Replies
View Related
Nov 21, 2011
Compile Error: Invalid Outsid Procedure
I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.
Sheet 1 code as follows:
Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault
Sheet 2 code at follows:
Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select
[code]....
View 3 Replies
View Related
Feb 18, 2008
I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code
Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function
View 9 Replies
View Related
Jan 16, 2009
I'm making changes to row A, but am getting an invalid outside procedure, not sure why. Don't even know what it means. It's not even in the same worksheet....
View 9 Replies
View Related
Nov 27, 2007
I have a userform in an add-in (which is loaded), when I try and call it from an excel sheet, I get the following error "Variable not defined"
Private Sub CommandButton3_Click()
UserForm1.Show
End Sub
The code in the userform is all private subs.
Similarly when calling a public sub from the add-in such as;
Private Sub CommandButton3_Click()
Call SillySub
End Sub
I get the error "Sub or Function not defined".
How should I be doing this?
View 3 Replies
View Related
Jun 19, 2008
how do you call another sub's function from another sub? For example:
Sub Worksheet_SelectionChange(ByVal Target As Range)
StartingDate:
Static STempHolding As String
If STempHolding <> "" Then OldStartingDate = STempHolding
STempHolding = Target.Value
EndingDate:
Static ETempHolding As String
If ETempHolding <> "" Then OldEndingDate = ETempHolding
ETempHolding = Target.Value
End Sub
If i just wanted to call the StartingDate function, from my Worksheet_Change sub how would i do that?
View 5 Replies
View Related
Jan 27, 2009
I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
View 3 Replies
View Related
Mar 2, 2012
I have found some code that does what I want- but i do not understand how to use - call it. The programmer says ...
GetNetworkIPAddress()
' can be called from a worksheet cell using the formula:
' =GetNetworkIPAddress()
I have put this in a cell but i ger an error #Name?
what should i do ?
View 9 Replies
View Related
Feb 12, 2009
I need to call a Stored Procedure in a SQL Server from VB, but do not have the minimun Idea about doing it....Could you help me ?...I made a lot of attemps copiying code from other treads and scratch it, but so far results = none.
Server name: VAIO/SERVIDOR
DataBase: CEDRO
I´m using Excel XP.
View 9 Replies
View Related
Sep 21, 2006
In my VBA Project I try to call procedure from another VBA Project, but I get syntax error. The code is like: call Automation.xls!convert_numb
View 2 Replies
View Related
Sep 8, 2007
I have 46 drop downs that I need to call from a main sub. I want to create one loop that will call each one to perform its function. Below is a simple example of what I am trying to do, but where I need help is with the 'Call Y' line. I am not sure what character to use to tell excel to look at what is in the value of Y, not 'Y' itself
Sub testitout()
Dim y As String
For X = 1 To 2
Sheets(" Lookup"). Range("E3").Value = X + 4
y = "dropdown" & X & "_change()" 'this will return "dropdown1_change()" for the first loop
Call y 'i want to call dropdown1_change() below
Next
View 9 Replies
View Related
Jan 10, 2008
Is it possible to call a Forms Command Button procedure from a Module?
View 3 Replies
View Related
Mar 22, 2007
Have a spreadsheet for creating employee schedules (any number of employees, 3 rows per employee, 5 columns for each day). I want to move all employees' info for one day (5 columns and XX rows) to another area and then clear the employees' data for that day. I have the code working for Monday but I don't want to duplicate it 6 more times for Tue -Sun. I have set up named ranges (i.e. MonFT, TueFT, etc.
I would like to call one subprocedure to do this and pass parameters for each day so the ranges can be changed to reflect the desired day?
I am doing this for holidays; i.e. if there is a Wed. holiday, store all of Wednesday's data and clear Wed. Then restore all Wed data when preparing the schedule for the following week.
View 7 Replies
View Related
Oct 30, 2008
I have a worksheet with a Drop Down list (Set up with Data Validation).
All I want to do is a call a procedure when a particular option is selected from the list, without have to run the macro manually.
View 7 Replies
View Related
Jul 28, 2006
I recorded a function and got the message box "Invalid Outside Procedure" when I tried to run the macro. I don't understand what it means or how to prevent it.
View 2 Replies
View Related
May 21, 2006
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
View 4 Replies
View Related
Sep 17, 2009
I would like to create a message box that will tell the user if the input they've loaded is valide base on two criteria.
1. The sum of the cells from O2 to O3000 is equal to zero.
2. There are no zeros in the cells from B2 to B3000.
View 5 Replies
View Related
Mar 3, 2007
Any Excel document that I try to open, I get the message
"XXXX.xls is not a valid Win32 application."
However, if I open Excel and then open the application it works.
It initially started on my XP PC. I uninstalled Office and reinstalled it...no change. Two weeks ago I upgraded to Vista(not for this problem)...no change.
How can I get the apps to open when I click on them?
View 9 Replies
View Related
Dec 17, 2008
When I insert a row into a worksheet (by selecting the row and then hitting ctrl+plus, or by going through the menu insert, row), a message pops up, as follows:
I created this worksheet from scratch and am not aware of any invalid reference.
View 9 Replies
View Related
Jul 4, 2009
I have a error with this code Row Invalid Qualifier
how can I qualifier Row
Private Sub CommandButton2_Click()
Dim Row As Double
Dim addItem As Integer
Dim count As Integer
count = 0
UserForm1.ListBox1.List(count, 0).Value = ""
ActiveCell.Value = ""
Sheets("Sheet2").Cells(1, 1)(Row.count, "A").End(xlUp).Offset(1).Value = ""
End Sub
View 9 Replies
View Related
Oct 17, 2009
I have 21000 E-Mail ID's
But Some have in Wrong Format, Now i want to know which one are InValid E-Mail ID's
Right Now i am Using thisISNUMBER(FIND(".",A2,FIND("@",A2)))
Formula
but its not Working Properly, It show True Even The EMAIL-ID IS WRONG.
See Below
Sheet3
image removed
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
View 9 Replies
View Related
Feb 21, 2007
I've used a VBA procedure to pull stock price historical data from Yahoo. Something has changed something and now the procedure will not work. With a worksheet named 'Web Data', I execute the following procedure. I now get an error from Excel (2003) stating that "The file could not be accessed. Try one of the following: ...", and then "Invalid Web Query". Here is the code that I am using:
'e.g. pull Dow Jones data for Feb 14 thru Feb 15.
smo = 2 ' Feb
sda = 14 ' 14
syr = 7 ' 2007
emo = 2 ' Feb
eda = 15 ' 15
eyr = 7 ' 2007
fund = "^DJI"
Sheets("Web Data").Activate
Range("a1").Select
Selection.Clear
With Selection.QueryTable
.Connection = _
"URL;http:// finance.yahoo.com/q/hp?&a=" & smo - 1 & "&b=" & sda & "&c=" & syr _
& "&d=" & emo - 1 & "&e=" & eda & "&f=" & eyr & "&g=d&s=" & fund
.Refresh
End With
View 9 Replies
View Related
