I have a multi-line text box in a user form. This information is loaded onto an excel spreadsheet. Where I have pressed the return button to go to the next line in the text box it loads in a square (actually I think it's probably more of a rectangle) character onto the excel spreadsheet. It there a way to get rid of this character?
View 3 Replies
I'm trying to create a macro that will import multiple multiline text files.
I have tried another Macro from this site however that imports the each text file into one cell, but i need each line to be in a new cell and each file to be in the same sheet.
I have a exel file which has been exported from Access to exel. There are many cells which shows the data as in Cell A1 with the Linefeed character in between data in a cell. Is there any way (may be using a macro) where I can remove the character and get it to display as B1 in the same cell(A1). The file is attached herewith.
View 5 Replies View RelatedI have a worksheet with several columns of data. In Col B are part numbers, in column D are dates. I wish to search through the data and remove all lines with duplicate cells in column B EXCEPT the line which has the latest date in colum D. I should then be left with a sheet that has no duplicate cells in column B and the latest date in column D.
View 9 Replies View RelatedWhen importing text from a CSV, the 'line returns' appear in a cell as a small square with faded left and right sides. The do force a line break as intended. However, they are a nuisance in reading and printing.
When I use ALT+ENTER to force a line break, there is no visible character (on screen or printed) for the line break, which is as it should be.
How can I replace this 'special character' line break with one not visible?
I need a formula to tell me whether a number is a square number, or I can do it so to see if the square root of a number is an interger. So far Iv been doing
A1 = 2
A2 = AND(RIGHT(A1,1)=INT(A1))
True or false outcome is fine, and it has been working fine on some examples, but the problem comes when I have 49, as it is 2 digits long. I've seen a formula similar to find the root symbol, and look at all the numbers upto this point (maybe FIND).
I found this while searching. Any idea how to add 2,3,4 lines?
I want to hover over a given label and have the text show. This one is for a TextBox
I was just going to load the code in the Labels Veiw code.
Private Sub UserForm_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
TextBox1.ControlTipText = ""
End Sub
Private Sub TextBox1_Enter()
TextBox1.ControlTipText = "Hello, welcome to TextBox1."
End Sub
I am reading info from a sheet via array into a listbox which displays the results on a user form. One of the columns has a long text and I need to wrap the text.
From my searches I think I need to have an actove x listbox.
I have right clicked on the toolbox but can not see one with the name for active x lisrbox.
what one I should select and if possible how to set it up to wrap the text.
I like to write multi-line formulas like this:
View 3 Replies View RelatedIs it possible to have a listbox with each line with a different colour?
View 2 Replies View RelatedThis is an continuation to some earlier formulations to place value correctly in cells. It started for me here: http://www.excelforum.com/excel-gene...ell-value.html
Now, I've come across another situaton. If there is a value of any combination of numerals and text "X" specifically as: 1x,21x,100x,1001x,10230x, I'd like to have the x removed. The resultant will be in column D of sheet FormulaOut. See attachment as this will be building on the following formula:
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I'm trying to build a formula on the matching text as below, im getting an value error, however when i press the FX key it shows the correct result.
Column A
Column B
Column C
Column D
[Code] ....
( I would like to match the below two criteria with the Row 1 and Row 2)
Co1
#VALUE!
Latest Forecast
Formula-->
IF(MATCH(A6&A7,B1:I1&B2:I2,0),"Ok","Not ok")
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I am trying to create a search filter that checks a cell for text or part of text in 3 columns and then filters out the rows that have a match. So there would be a cell at the top of the page with a line around it and the word type your search criteria here. The used types in a word and excel then looks into 3 columns below that have various data. If there is match then a filter action would kick in and only show the rows where there was a match regardless of the column.
View 2 Replies View RelatedIs there is any chance to AlignRight for numbers and AlignLeft for texts in a multi column listbox?
View 5 Replies View RelatedTrying to count the number of fields that meet a criteria base in 3 different columns. Worked on this for few hours but still keep hitting the wall of no right answer. I have attached an example sheet.
Trying to find the Number of fields that are not blank in the range of B9:B28 and have no date (are blank) in range(C9:C28) and have a number that is < 7 in range (D9:D28).
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
I am doing a cross between two parents, whose possible genotypes are AA, BB, or AB.
I want to use if clauses to look at the parent genotypes, (paternal is listed in column E and maternal is listed in column F) and then give me the possible recombinant genotypes in column G. there are 9 possible combinations (recombinants in parenthesis)
AA x AA (AA)
BB x BB (BB)
AA x AB (AA, AB)
AB x AA (AA, AB)
BB x AB (BB, AB)
AB x BB (BB, AB)
AB x AB (AA, AB, BB)
AA x BB (AB)
BB x AA (AB)
I tried using if clauses, but i don't think i can nest more than 7 cases, and I have 9 different combos.
I have 6 rows A1-A6(sheetsize), they can be 1 of 8 numbers. (16,14,12,10, 5/8, 1/2, 3/8, 3/16) these are all metal gauges. The cell next to them B1-B6(sheetgauge) has a number that refers to how much sq ft each of these sheet metal sizes has. I would like a cell below A30 to add up all the sq ft in B1-B6 if it is 16 gauge. Then A31 will add up all the 14 gauge, etc.
How is this possible without having a huge formula.
Here is my standard formula, but it wont add the B cells together if more than one of the same sheet sizes.
=index(sheetsize,match(A31,sheetgauge,0))
My code works great on my computer but when I bring it to another computer it gives me errors. I think it has to do with my use of square brackets to reference cells. the error that comes up is
compile error:
can't find project or library
What I'm doin here is going to my template sheet then getting the info from different cells and then later using it somewhere else. in place of using range and selecting cell I am using square brackets to select a cell. it worked fine on my computer and was a lot less writing, here is a small part of my code
I often see square brackets around ranges in code. eg [A1]
if there are any advantages/disadvantages with using this notation, apart from the obvious its shorter?
Simple question: Can an Excel Macro insert a line of boilerplate text under the last thing copied to a worksheet? I want to paste something into a worksheet, and add a message under it, and a blank line.
View 5 Replies View RelatedSheet1
Removed screen shots - Please DO NOT use actual personal information, sample data only! - Moderator
Some of the people on this list have a second name entry on the line below their first name entry. ALL of the people on the list have an Address2 on the line below their Address1.
How would I move the second name entry into the cell next to the first name entry, and then concatenate them, and then also move the Address2 entry into the cell next to Address1 (but not concatenate these)?
Like this:
Sheet1
An address is separated by the square characters, and usually I would use Text to columns>Delimited>Other>Alt+0010 to separate the lines. When I get to the Delimited screen where you check Other and enter Alt+0010, the keyboard just makes beeping noises and the text preview only shows the part of the address prior to the soft return, as if there is no char(10) delimitation.
Sheet1 I11299 S Taylor St. #12
Shakopee, MN 553792880 Tuva Rd.
Cokato, MN 5532131381 360th Ave
Siren, WI 5487245824 Dupoun Ave. N
Brooklyn Center, MN 554305718 Garden Lane #2
Shakopee, MN 553796583 Hall Ave
St. Paul, MN 5510771615 South 4th St. #2003
Minneapolis, MN 5545481525 6th Ave S #8
St. Cloud, MN 563019715 S Glen DR
Bloomington, MN 5542010340 2nd Ave. S. #344
Waite Park, MN 56387 Excel tables to the web >> Excel Jeanie HTML 4
i am trying to use the square root formula to work out the top length of the picture on the userform from the numbers i have in the textbox's.
It is basically a 10x5 rectangle and i need to find the diagonal length
which should be 11.18 but it is returning 10
I need to add extra text line in textbox by Toggle Button or checkbox. The problem my extra line every time I select it makes extra lines
View 5 Replies View Related
