I am reading info from a sheet via array into a listbox which displays the results on a user form. One of the columns has a long text and I need to wrap the text.
From my searches I think I need to have an actove x listbox.
I have right clicked on the toolbox but can not see one with the name for active x lisrbox.
what one I should select and if possible how to set it up to wrap the text.
Is it possible to have a listbox with each line with a different colour?
View 2 Replies View RelatedI have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I found this while searching. Any idea how to add 2,3,4 lines?
I want to hover over a given label and have the text show. This one is for a TextBox
I was just going to load the code in the Labels Veiw code.
Private Sub UserForm_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
TextBox1.ControlTipText = ""
End Sub
Private Sub TextBox1_Enter()
TextBox1.ControlTipText = "Hello, welcome to TextBox1."
End Sub
I am not grasping how to setup a multi column listbox (2 columns).
View 13 Replies View RelatedI have a mulit-extended listbox, a textbox and a button on a form.
I have populated the listbox with a list of files from a directory no problems.
First Part (Single Selection):
When I click on one/single filename in the list I want:
1. The textbox to be populated with the name I have selected
2. When I click the button (With the single filename selected, I want to call a function passing the filename I have selected.
The function could contain a msgbox(selecteditemname) for now.
Second Part (Multi Selection):
When I multi select filenames from the list I want:
1. The textbox to be populated with "Multiple Files Selected"
2. When I click the same button as before (With multiple filenames selected, I want to call a different function and pass each filename individually in may be a for loop)
The function could contain the loop and with each filename in the loop msgbox(selecteditemname)
I have tried the above and noticed that the listbox1.value property for multi listboxes dont seem to work and I am not really sure how to distinguish between one selection or multiselection to get a button to pass off to two separate functions.
I like to write multi-line formulas like this:
View 3 Replies View RelatedI have written a VB-excel program after a lot of reading on this forum. Purpose of the program is to load a number of log-files with lots of data.
I load these files in a 2 column listbox, were the 1st column is the name of the file and the second column is a number, starting with 1, 2, 3 etc.
Since I don't get the files in the order I want them to be, I created a button to change the number in the 2nd column.
Now my problem: I need to sort the listbox according to the 2nd column. I have a routine that works ok, but whenever I make a mistake like duplicate numbers in the 2nd column, I lose all the data in the listbox and can start over again.
Dim listarray(20, 2) As Variant, Log_name As String, k, i, n, m, listnum, pos, remove_num
listnum = ListBox2.ListCount
For n = 0 To listnum - 1
pos = ListBox2.List(n, 1) - 1
Log_name = ListBox2.List(n, 0)
listarray(pos, 0) = Log_name
listarray(pos, 1) = pos + 1
Next n.................
I am using the following piece of code to 'link' a value from a cell in one workbook into another.
ActiveCell.FormulaR1C1 ="='[filepath]Front Sheet FIT'!r7c4"
However, i have come across a cell which displays the result of a reference to another cell (something simple like =b32). Normally I would just link to b32, however, the macro has to be applied to a large number of documents and in some cases text has been specifically entered, while in others the reference has been used. Is there any way of using VBA to display either the result of a formula (if there is one) or text if this is the case?
I have a multi-line text box in a user form. This information is loaded onto an excel spreadsheet. Where I have pressed the return button to go to the next line in the text box it loads in a square (actually I think it's probably more of a rectangle) character onto the excel spreadsheet. It there a way to get rid of this character?
View 3 Replies View RelatedI am currently setting up a userform where one of the options is for an error code (chosen from a listbox) but the user has to be able to select multiple codes. I have the below working if it is NOT multi select, works a dream and goes in the right column.
VB:
If ListBox2.Text = "A1" Then
LastRow.Offset(1, 20).Value = "x"
ElseIf ListBox2.Text = "A2" Then
LastRow.Offset(1, 21).Value = "x"
But as soon as I set it to mutliselect and choose say A1 and A2 neither one writes, I imagine because Listbox2.text is now A1,A2 and not just one or the other.
I am trying to get this code working. at the moment it allowed me to make multiple selection in a listbox. now i want each of the selected item to different cell.
Here is my code at the moment:
[Code] ....
Copy of the excel if need it.
ListBoxMultiSelect.xls
I have a form with a list box on it, I want the listbox to display a number (1 through 20), the agents name, and a count of how many observations they have had. Unfortunately I have been unable to find an example of how to add multiple columns to a list box. I found the usual listbox1.list(x,x)= "whatever" type stuff but that doesn't seem to work right.
how to populate multiple columns including the headers, or point me to a site that explains it or has code examples?
Here is the data I want to put in the multicolumn listbox (the number and the agent name are from a worksheet, the deskside is a calculation sumproduct based on the 3 sheets that make up the quarter....
Is it possible to have some VBA in Sheet1:
1. That when a user click on a cell in a particular column within a specific sheet:
1.1 That they are presented with a multi select listbox (Showing 20 items stored in a column in Sheet2 )
1.2 And when the items are selected that the items are automatically written in the same cell that was clicked in Sheet1 with a new line break in between each item?
Is there is any chance to AlignRight for numbers and AlignLeft for texts in a multi column listbox?
View 5 Replies View RelatedI have made the function below to return a variant multidimensional array. I pass the function an array of folder paths that I wish to search through looking at subfolders within that path where their name matches a search string that I pass to the function. eg., it will find a folder named "Catnap" if you pass the string searching for as "Cat*".
The size of the array it builds depends on how many folders it finds that match the search string and so needs to be built dynamically. Hence, I believe it builds a 2 dimensional array horizontally and I transpose it at the end of the function. In each element I put the folder name that was found in the first dimension and the path to that folder in its second dimension.
I have a 2 column listbox on a form that I set this array to. eg., Me.ListBox1.List = DirPaths("C:","Cat*",vbDirectory,100)
This works fine and shows a list of folder items found by folder and path in the two columns of the listbox if there is greater than 1 search found. However, when the search only finds 1 then the listbox shows the folder name with the folder path in row 2 of the list box. (See below).....
I'm trying to create a macro that will import multiple multiline text files.
I have tried another Macro from this site however that imports the each text file into one cell, but i need each line to be in a new cell and each file to be in the same sheet.
I have a multi selection listbox that has 6 columns located on the "Form" worksheet. Trying to extract the data from the selected lines (and all columns for the selected line) and copy to another worksheet (ExtractedData). My code so far only works to extract the multiple selections for the first column. Not sure how to have it include all columns. Ideally would like to have the six columns to be extracted and placed in separate cells on the ExtractedData worksheet. Here is what I have so far:
Sheets("Form").Select
SelCnt = 0
With Worksheets("Form").ListBox3
For i = 0 To .ListCount - 1
If .Selected(i) Then
SelCnt = SelCnt + 1
[Code] .......
I want to add a msgbox with a no selection error to a multi select listbox I have. For a dropdown I just use "if .ListIndex =-1" but listindex doesn't seem to work. I'm playing with .selectedindex but it's not playing ball
View 4 Replies View RelatedI have a Listbox (Listbox2) in column C. The listbox allows users to select multiple items (in this case it is countries). So the user could select 1 or 20 countries based on the previous criteria.
What I would ideally like is for the next column (column D) to automatically list the selected items without having to use a command button in the actualy cell. However, I could put a command button at the end to say "Confirm" which would then transfer the above into the relevant cells.
This is an excel file, and each row would works the same. Basically users are entering products for set up row by row, so the file could be 10 rows or 200.
Just to be clear, it would look a little like this:
Drop Down Listbox
Column C Column D
Canada (Selected) Canada, USA
South Africa
USA (Selected)
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
Ive been having lots of trouble programing a multi column listbox to play ball. On the form there is 1 tree view and two listbox's. The object is to double click a list 1 item and have that go into the list 2.
Connected to the listbox2_dblClick.. Takes the selected list item and adds to columns 1 intergra value. This places a annoyance to me where listbox 2 is not fully populated (you will see ive fully populated the list during my own testing) and a item is selcted if double click on a blank part of the listbox it will increase the int value of the selected item. I though of populating the list with blanks (used "." as visual) so a cheek could be made on the double click item and if blank do nothing.....
I have one form control listbox in excel. It is with multi selection Is there a way to find the latest selection in the listbox?
View 2 Replies View Relatedi have several listbox with two columns in a userform in a sheet i have several columns whith values and i'm trying to put the values from the columns in the respective listbox. down is the code i wrote but is stressing with column command
Private Sub UserForm_Initialize()
Dim contar, j, i As Double
Sheets("Historico").Select
contar = 0
For j = 1 To 15
linha = j
For i = 3 To 65536
I have a multiselect listbox in a worksheet that the user can select from. When the file is saved, closed and reopened, the user selections disappear. Is there a way of reloading the previous selections when the file is reopened? I have used the listbox from the control toolbox and have Excel 2003. My VB experience is very limited!!
View 8 Replies View RelatedI am trying to create a data entry form with a text field and a listbox. The list box is populated by another sheet and the text box will be used to enter names. I need to be able to enter a new name, select multiple options from the list box and then click a button to add this info to a sheet in excel.
I have read about changing the list options to allow this etc - the problem is I can't get the results to go back into excel - all I get is a name with nothing from the listbox.
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
