Multi-result Array Formula With Max
Jul 20, 2007
I am using multi-result array formulas to reduce error checking when processing arrays of numbers. However I cannot get this to work with some of the functions as they use Max or other array aware functions and so ruturn the same result for each cell they are enetered into.
Example for A1=2,B1=4
=2*A1:B1
array enetered gives 4,8
However
=Max(2*A1:B1,5)
array enetered gives 8,8 rather than 5,8. I have tried creating my own version of a max function, but am having problems getting it to evaluate array functions.
View 6 Replies
ADVERTISEMENT
Jun 21, 2009
See attached sample workbook. Row 37 current has formulas between columns AQ and IP that return a value 2 or 4. Conditional formatting on these cells then gives them an appropriate colour.
Due to the large number of cells involved, I wanted to use a multi-cell array formula instead. I have attempted this on row 50 which should give the same results, but as you will see this is not happening.
View 4 Replies
View Related
Jul 4, 2009
I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?
View 9 Replies
View Related
Jun 7, 2009
I have array formula {=row(indirect("1:5")} which is result to {1;2;3;4;5} and it look like a range.
And i want to insert this into formula COUNTIF at the range section
i'd try it, but it didnt worked.
(its look like insert array formula into range section of a formula)
View 9 Replies
View Related
May 5, 2009
I have attached a file, in which i need to get the value for IHC from a table using formula as the conditions will vary from time to time. The table is only a sample.. actually it had much more.
View 5 Replies
View Related
Nov 26, 2008
I have a spreadsheet which I will be adding to over time. I need a macro that will look for the last 10 rows and then pull together a summary table based on data from several of the columns on each of those rows.
I've tried to go about this by using an array. The array will always be the same size (it will always be 10 by 11, i.e. EngineArray(10,11)-basically the same size as my summary table). I've also set Option Base 1.
What I’ve got so far is below. It isn’t working properly though. To start with I was getting ‘type mismatch errors’. Now instead of reading the numbers from the selected cells into the array, it just changes all the cells I’m trying to read from to ‘TRUE’?
View 6 Replies
View Related
May 15, 2007
I've created an array that is 60 pairs of cells wide. Each row in the array represents a different account. The 60 pairs of cells contain up to 60 payments in a payment stream. The first cell of each pair may contain an amount of interest to be paid, or zero if the time band in which it was/will be paid is not within the time range that I'm evaluating. The second cell of each pair may contain a number between 1 and 10 representing the time band in which the interest will be paid, or zero if the payment date falls outside of the time bands.
I need to be able to sum the interest to be paid in each time band for all of the accounts in my database.
Is there an Excel function that I could use or will I need to write some VBA code to loop through each row?
View 9 Replies
View Related
Jan 12, 2007
I am currently using a macro which highlights keywords and associated page views from an array in my website stats spreadsheet. Now I need to take it to the next level:
I want to use a multi-dimensional array to pull out any keywords that are duplicated, and display them at the top of my spreadsheet with the totaled page views next to them in a different color (red).
Here is my existing Keyword highlighting
Sub Highlight_Keywords()
Dim vntWords As Variant
Dim lngIndex As Long
Dim rngFind As Range
Dim strFirstAddress As String
Dim lngPos As Long
View 9 Replies
View Related
May 17, 2007
I successfully built a multi- cell array that sorts a bunch names into ascending order. But now when I need to use the same array formula again, I get the wrong results in the array formula cells and I can't figure out how I'm entering the array incorrectly. The error I get in each of the 7 cells is the identical number, "1".
Here's the deal. Cells B10 - B16 contain names and numbers that I need sorted in ascending order. Then, I highlight cells C10 - C16 and enter the following formula using shift-ctrl-enter: ...
View 4 Replies
View Related
Jul 20, 2007
I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format.
I split the CSV into rows, and then put each row into a 2-dimensional array.
I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......
View 4 Replies
View Related
Aug 18, 2007
I have made the function below to return a variant multidimensional array. I pass the function an array of folder paths that I wish to search through looking at subfolders within that path where their name matches a search string that I pass to the function. eg., it will find a folder named "Catnap" if you pass the string searching for as "Cat*".
The size of the array it builds depends on how many folders it finds that match the search string and so needs to be built dynamically. Hence, I believe it builds a 2 dimensional array horizontally and I transpose it at the end of the function. In each element I put the folder name that was found in the first dimension and the path to that folder in its second dimension.
I have a 2 column listbox on a form that I set this array to. eg., Me.ListBox1.List = DirPaths("C:","Cat*",vbDirectory,100)
This works fine and shows a list of folder items found by folder and path in the two columns of the listbox if there is greater than 1 search found. However, when the search only finds 1 then the listbox shows the folder name with the folder path in row 2 of the list box. (See below).....
View 2 Replies
View Related
Feb 26, 2008
I've got the folowing array's
date1>company1>price
>Company2>price
>company3>price
>enz
Date2>company1>price
>company2>price
>enz
enz.
But these are not the array's that i need for a correlation that i want to make.
Is it possible to transform the array's above to an array such as:
Company>date1>price
>date2>price
>date3>price
>enz
View 5 Replies
View Related
Feb 27, 2008
I'm trying to use VBA to do some matrix processing. I have successfully done matrix processing in the spreadsheet, but I'm looking to port the logic into VBA to more easily reuse central formulas and reduce the amount of code in the spreadsheet.
The function shown below works. I had to hack around the variable declarations to eliminate processing/compile errors but it seems to function (no pun intended).
While debugging I noticed that this function would seem to get called 4 times. I do have other modules running, although I don't think any other modules are affecting this.
After some input from shg, I updated the variable declarations, but I'm getting an "Overflow" error reported. Sometimes (not always) a divide by zero also pops up. I do have the Msgbox for errors at the end, I haven't tried removing that part to see if the error reporting vanishes. I'm not sure 'hiding' error alerts is the best thing to do anyway...
View 8 Replies
View Related
Apr 15, 2008
the built in "Join" function can join all elements of a 1-dimensional array into a string with delimiter. Now, how do I do that with multi-dimensional array if I just want to join 1 dimension of it.
For instance, I have:
m = 10
n = 20
Redim my(m, n)
'assign values to array here...
'I want to join, say, my(5, 0 to n) only
'How to do that without declaring a new 1 dimension array?
Also, I want to write a join sub/function to do the above for n-dimensional array, do I need to write each one for every number of dimension (1 sub for 2-dimension, 1 sub for 3 dimension, etc.)?
View 4 Replies
View Related
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Aug 23, 2012
Is there any way to do this part of code without calling out each element individually?:
VB:
Dim aSequence(7, 1) As Integer
'setup Evaluation sequence
aSequence(0, 0) = -1
[Code]......
View 2 Replies
View Related
Aug 6, 2009
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies
View Related
Sep 3, 2006
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies
View Related
Jul 5, 2014
[Code] ...
How to push strResult into an Array? And how to set and use something like an id?
strResult.id = n
I would like to archive something like:
MsgBox (strResult(0))
MsgBox (strResult(1))
MsgBox (strResult(this.id))
etc
View 13 Replies
View Related
Dec 27, 2008
I delcare an array of dates and assign it with a function that returns an array of dates. Then I want to pass the result to a sub which takes an array of dates as a parameter. However, I am getting a type mismatch error on this line
View 2 Replies
View Related
May 14, 2009
I have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
View 14 Replies
View Related
Oct 3, 2013
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
View 5 Replies
View Related
Aug 9, 2013
I'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
View 4 Replies
View Related
Nov 20, 2013
I am looking up a risk matrix to return the risk rating... it is very simple, it works on one sheet, but on a different sheet (looking up different data, but same basic format) it returns exactly the opposite rating.
My formula is: =INDEX($G$6:$K$10,MATCH(I19,$G$5:$K$5,0),MATCH(J19,$F$6:$F$10,0))
Here is F4 to K10
I have data validation on I19 and J19 based on the cells below
Consequence
Priority
Very Low
Low
Medium
High
Very High
[Code] ..........
BUT... when I put Very Low and Very Low in the two cells (I19 and K19) I get Very High as the return.
View 1 Replies
View Related
Jul 22, 2014
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
View 2 Replies
View Related
Jun 30, 2014
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
View 5 Replies
View Related
Feb 6, 2007
I am working on a formula that has just gotten beyond me. This is what I want it to do:
If:
=IF(K9<I9,
Then:
IF((I9-H9+T8+U8)>=180,(180-T8-U8-(K9-J9)),(I9-H9)),IF((K9-J9)+(I9-H9)>=180,IF((K9-J9)>=180,0,180-(K9-J9+T8+U8)),
Else:
IF(I9-H9)>=(180-T8-U8-(K9-J9),(180-T8-U8-(I9-H9),(I9-H9))
This is what I currently have, but it's not working:
=IF(K9<I9,IF((I9-H9+T8+U8)>=180,(180-T8-U8-(K9-J9)),(I9-H9)),IF((K9-J9)+(I9-H9)>=180,IF((K9-J9)>=180,0,180-(K9-J9+T8+U8))),IF(I9-H9)>=(180-T8-U8-(K9-J9), (180-T8-U8-(I9-H9),(I9-H9))))
View 8 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
Jan 29, 2010
I like to write multi-line formulas like this:
View 3 Replies
View Related
Aug 22, 2009
I have previously been performing a multi level SUMIF of named ranges with a large data range.
This works but its inefficient as it would be better to preselect a subset range before the SUMIF begins matching criteria.
Basically, i'd like to select a range of rows which will parse into the SUMIF formula.
I have solved this by referencing an external cell to create the range.
View 6 Replies
View Related
