I have array formula {=row(indirect("1:5")} which is result to {1;2;3;4;5} and it look like a range.
And i want to insert this into formula COUNTIF at the range section
i'd try it, but it didnt worked.
(its look like insert array formula into range section of a formula)
I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?
View 9 Replies View RelatedI am using multi-result array formulas to reduce error checking when processing arrays of numbers. However I cannot get this to work with some of the functions as they use Max or other array aware functions and so ruturn the same result for each cell they are enetered into.
Example for A1=2,B1=4
=2*A1:B1
array enetered gives 4,8
However
=Max(2*A1:B1,5)
array enetered gives 8,8 rather than 5,8. I have tried creating my own version of a max function, but am having problems getting it to evaluate array functions.
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
I have a scorecard that looks something like this:
90% or greater=3
80%-89%=2
70%-79%=1
0%-69%=0
I need the "cell" to react accordingly and I'm lost.
I have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:
=IF('4. NORMALITY ASSESSMENT'!AC55>'4. NORMALITY ASSESSMENT'!AA55,"YES", "NO")
Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.
Dim myDynRange As Range
Dim myLastRow As Integer
Range("H:H").Select
myLastRow = Range("H:H"). CurrentRegion.Rows.Count
myFirstCell = Cells(Counter, 8).Address
myLastCell = Cells(myLastRow, 8).Address
myDynRange = myFirstCell & myLastCell
im having a problem with the last line
myDynRange = myFirstCell & myLastCell
my eventual aim is to do an average on this column with a line like
ActiveCell.Offset(Counter, 1).Value = Application.WorksheetFunction.average(myDynRange)
the reason why my range declaration is so strage is because i was trying to change the dimensions of the range with an offset function because i had many ranges to average but the offset function didnt want to work. this way goes like this....................
Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).
In this case the result I'm looking for is on row 2:
Is this possible to calculate in 1 cell only (h1)?
A
B
C
D
E
F
G
H
1
44.2
48.6
47.5
0.0
42.3
44.6
49.5
??
2
2.6
1.5
3.5
7.6
I have a query on retrieving the result from a set of range from other sheet.
Query: In the Sheet1 Column B has to take first two words from the
Column A & lookup the matching results from Sheet 2.
(The search range should be the first two words of each cell)
Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B
Example: The Expected result should be as mentioned below. (Blue in color should be the results)
Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5
Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A
Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14
This is my query
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies View Related1) Input data are static and helper columns can be added if needed.
2) Filter will be dynamic range (in attachement is the filter static), and the count of years can be changed on users request. So there could be only 2011, but also 2011+2012, 2012+2013+2014 etc.
3) In col 'J', the is what I know to do, but I do not want to use SUMIF+SUMIF+SUMIF... for each year (the count of years will change througt time as mentioned above).
Range A1:A10 contains no formulas, only constants.
Only one constant value at most would ever be in that range, sometimes nothing in that range.
The value might be text like "Tom", or it might be a number like "1234".
The value could be in any of the 10 cells.
So far, and this is where the "missing something obvious" part comes in, I have only seen array solutions such as
=INDEX(A1:A10,MATCH(TRUE,A1:A10"",0))
My question is, can this result be achieved with a non array / non sumproduct formula.
I need to do this for 6000 cells in a project, that's the design and that's the way it is. I don't want that many arrays in the workbook. I already did this with VBA so I am not asking for a VBA or UDF solution, just hoping to know from the formula wizards what a non-array formula could be that returns the first found (and in this case only-existing) constant value in a range.
I have the following code that I am trying to distribute over an array. The best case scenario is that the code enters the text of the formula instead of the calculated value. When I tried to tweak a few things I couldn't even get the text to show up. This seems to only happen on the formulas which include If_Then statements. Other straight forward formulas such as "sum" etc... seem to go into place and calculate.
Sheets(1). Range("b3:s3").FormulaArrayR1C1 = _
"=IF(AND(MAX(2!R[2]C:R[6]C)>0,SUM(3!R[1]C:R[5]C)<0),MAX(2!R[2]C:R[6]C),"")"
I am currently using the array formula to find out the most recent date a business as referred a deal. I have been using the below array formula to figure this out...
{=MAX(IF((Opps!A:A=[@Company])*(Opps!B:B=[@[Full Name]]),Opps!G:G,0))}
However, we have now have two types of deals. Opps and Suspects. SO now i need to figure out the most recent date from Opps!G:G and Suspects!G:G... regardless of what the deal type is. Hope that makes sense.
Basically i need to have a formula along the same lines as above but MAX date from if conditions from Opps OR conditions from Suspects
I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedAssume I have a simple date array
1/13/20142/12/20143/12/20144/11/20145/13/20146/11/2014
I want Excel to see where today's date falls and return how many work days it is from the date boundaries.For example, today is 2/8, which falls between 1/13/2014 and 2/12/2014
Cell I19
=LOOKUP(TODAY(),B2:Q2)- yields 1/13/2014
=NETWORKDAYS(I19,TODAY()) yields 20 workdays
But I want to also grab the 2/12/2014 date and get the number of workdays from that- all in one equation.If not one equation then 2 but not separated for each border date like I have above
I'm creating a simple bit of code which needs to include an array formula - but the code below fails;
Selection.FormulaArray = _
"=IF($L3="","",IF(ISERROR(INDEX(Data!$BG$7:$BP$11,MATCH('Pay Advice'!$A$2,Data!$A$7:$A$11,0),MATCH(1,IF(Data!$BG$6:$BP$6='Pay Advice'!$L3,IF(Data!$BG$5:$BP$5='Pay Advice'!H$11,1)),0))),0,INDEX(Data!$BG$7:$BP$11,MATCH('Pay Advice'!$A$2,Data!$A$7:$A$11,0),MATCH(1,IF(Data!$BG$6:$BP$6='Pay Advice'!$L3,IF(Data!$BG$5:$BP$5='Pay Advice'!H$11,1))))))"
"Runtime error 1004: Unable to set the FormulaArray property of the range class"
What am I doing wrong? The formula is fine when typed in.
[Code] ...
How to push strResult into an Array? And how to set and use something like an id?
strResult.id = n
I would like to archive something like:
MsgBox (strResult(0))
MsgBox (strResult(1))
MsgBox (strResult(this.id))
etc
I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.
I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.
I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.
I've am array formula that I use to provide highest values:
Code:
{=INDEX(Data!$D$2:$D$128, MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))
=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-MIN(ROW(Data!$D$2:$D$128))+1)),
MATCH(LARGE(Data!$D$2:$D$128,ROW(A1)), INDEX(Data!$D$2:$D$128,
MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-
MIN(ROW(Data!$D$2:$D$128))+1)), , 1), 0), 1)}
I want to replace the range Data!$D$2:$D$128 with a dynamic reference: like that one:
Code:
ADDRESS(MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+1,
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")&":"&ADDRESS(
MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+COUNTIF(Data!$Q$2:$Q$10000,Summary!$B$1),
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")
The two formulas work well in separate sheets but crash when put together, how could I possibly insert the second address formula into the first one?
I'm looking to loop a comparison code. I'm using dynamic referencing (using x and y) to find maximum values for specific time intervals. The code works on a cell to cell basis, meaning if I input the formula and change the cell referencing manually then the equation will give the desired results. However when I attempted to create a VBA code to speed up the process I kept getting a 1004 Unable to set FormulaArray Property of the Range Class error, I later figured out that the Formula Array function is limited to a certain number of characters so I split up my function into 3 different string formulas. I still get the same error.
[Code] ............
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
I delcare an array of dates and assign it with a function that returns an array of dates. Then I want to pass the result to a sub which takes an array of dates as a parameter. However, I am getting a type mismatch error on this line
View 2 Replies View RelatedI have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
I'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I am looking up a risk matrix to return the risk rating... it is very simple, it works on one sheet, but on a different sheet (looking up different data, but same basic format) it returns exactly the opposite rating.
My formula is: =INDEX($G$6:$K$10,MATCH(I19,$G$5:$K$5,0),MATCH(J19,$F$6:$F$10,0))
Here is F4 to K10
I have data validation on I19 and J19 based on the cells below
Consequence
Priority
Very Low
Low
Medium
High
Very High
[Code] ..........
BUT... when I put Very Low and Very Low in the two cells (I19 and K19) I get Very High as the return.
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)