I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?
View 9 RepliesI have array formula {=row(indirect("1:5")} which is result to {1;2;3;4;5} and it look like a range.
And i want to insert this into formula COUNTIF at the range section
i'd try it, but it didnt worked.
(its look like insert array formula into range section of a formula)
I am using multi-result array formulas to reduce error checking when processing arrays of numbers. However I cannot get this to work with some of the functions as they use Max or other array aware functions and so ruturn the same result for each cell they are enetered into.
Example for A1=2,B1=4
=2*A1:B1
array enetered gives 4,8
However
=Max(2*A1:B1,5)
array enetered gives 8,8 rather than 5,8. I have tried creating my own version of a max function, but am having problems getting it to evaluate array functions.
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies View RelatedI created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View Related[Code] ...
How to push strResult into an Array? And how to set and use something like an id?
strResult.id = n
I would like to archive something like:
MsgBox (strResult(0))
MsgBox (strResult(1))
MsgBox (strResult(this.id))
etc
I delcare an array of dates and assign it with a function that returns an array of dates. Then I want to pass the result to a sub which takes an array of dates as a parameter. However, I am getting a type mismatch error on this line
View 2 Replies View RelatedI have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
I'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I am looking up a risk matrix to return the risk rating... it is very simple, it works on one sheet, but on a different sheet (looking up different data, but same basic format) it returns exactly the opposite rating.
My formula is: =INDEX($G$6:$K$10,MATCH(I19,$G$5:$K$5,0),MATCH(J19,$F$6:$F$10,0))
Here is F4 to K10
I have data validation on I19 and J19 based on the cells below
Consequence
Priority
Very Low
Low
Medium
High
Very High
[Code] ..........
BUT... when I put Very Low and Very Low in the two cells (I19 and K19) I get Very High as the return.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View RelatedI just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I've been searching the forums and web trying to figure out how to extract a text value from a 3D array result, to no avail or well beyond my understanding.
I've attached a file which shows an abbreviated version of the search (from the original 49 col x 400 row, which shows the name to date array which can return a sum.
What I'm looking to do is identify within this array result if there has been a text entry, and return the text as opposed to a sum of the remaining values. This is essentially a double check to make certain that there aren't hours scheduled when other events such as vac/loa/etc are also booked.
I have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))
Is there an issue with the formula or some setting in excel?
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I have a workbook consisting of 4 worksheets. Cell B5 in each of three of these sheets has the exact same formula (copy/pasted) referring to data in the other worksheet. In one of the three similar sheets cell B5 shows up as a blank. In the other two, this cell shows up as a zero.
Since the formula in each of these cells is identical, I figured the difference in the way the result showed up was a matter of cell formatting.
The cell format for each of the three is indicated as ‘general’. However, with one of these, the ‘sample’ shown when you view the cell format shows as a blank while the other two show the ‘sample’ as a zero (0). How can I go about making all three cells appear the same, namely a blank?
I have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30
the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.
Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???
Here is an example...
In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:
=IF(B1>0;((A1)*(B1)*0.15);0)
At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
Column B is basically 550 points + column C = Base Roll.
We need to introduce a cap so no more than 1000 points can be displayed/earned. So column G adds all points & column F caps.
So far it's all ok.
Now when i add a value to column E (points spent) those points are deducted from column G instead of the capped 1000.
Entering a value of 500 displays 800 in column F instead of 500.
I have a formula that returns a string using the concatenate function. Now I want to copy the string to another cell without copying the formula. The string will become a record in a CSV file. I cannot figure out how to make what shows on the screen a label cell instead of a formula cell.
View 3 Replies View RelatedHow do you write a code that will calculate a formula and output the result in a cell?
For example:
A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3
Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.
Any way to convert a cell result into value if it meets the criteria or else the formula stays in place
I have same formulas from cell Q17 to Q1000 some of those cell will have different results based on manual inputs that occur daily.
I would like the formula result to convert to value only if greater than -1000 or else keep the formula in place to continue future calculations till it meets the criteria.
I have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.
View 4 Replies View Relatedcopying a formula. Basically i want to paste special a formula result automatically.
I have a if function set up so when 2 days corespond then in the 3rd cell it records the value, however when ever the date changes the value disappears, i can keep the value u there by paste special but i would love to set this up as an automatic thing once a value is recorded it records the value and deletes the formula, or the value doesnt change when the date (thus the condition) changes...
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2)
A2: ????
I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.
If I do this it gets close:
A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.