I obviously know less about functions than I thought I did. I've got the attached spreadsheet set up except getting totals at the bottom. The production total L44, would be column A multiplied by the quantity entered in columns L and summed. Same for Total SF, square footage in column B times quantity in L and summed at the bottom. This would continue daily, needing sums under each column.
View 4 RepliesTake a single cell in column D, and multiply it by a single cell in column E, which will equal F. Take column F, and multiply it by .02 (2%), which will equal G. Take a cell in column G, and subtract it from F, which will equal I. And this all takes place in the same row. Then have it move down to the next row, and do the same thing..... so it would basically look like this.....
A B C D E F G H I
1 D1 E1 (D1*E1) (F1*.02) (G1-F1)
2 D2 E2 (D2*E2) (F2*.02) (G2-F2)
3 D3 E3 (D3*E3) (F3*.02) (G3-F3)
For easier reading.... in each row I want it to do the following math
D*E=F
F*.02=G
G-F=I
And then do it for every row that I have data in (excluding the VERY first row). I am -COMPLETELY- sorry if I broke any rules, and am also sorry for the poor representation
I have two columns of data in an excel sheet that are equal in size and both only contain numbers.
I'm trying to write a macros which will put both of these sets into arrays, then perform a calculation on them.
Specifically ArrayA + 3*ArrayB then put the result back into the worksheet in a new column. Below is the code I have so far.
Dim ArrayA As Variant
Dim ArrayB As Variant
Dim ArrayC As Variant
ArrayA = Worksheets("Sheet1").Range("A1:A5")
ArrayB = Worksheets("Sheet1").Range("B1:B5")
This is where things go bad
ArrayC = ArrayA + 3 * ArrayB
I imagine this is a simple conditional SUMIF function. I'd like a cell to add values in e.g. column "d" when that row meets certain criterion in column "a".
In other words, I have a column that has times recorded in minutes, and another that says a person's name which correlates with the times. I'd like a cell on another sheet to give a total sum of minutes for each person.
Ideally, part of the function would translate the minute count into hours/minutes, but I think I can figure out how to do that by changing the format in the cell...
I behind developed to a time a function of Addition with an only conditional criterion.
I would like to extend at least for three criteria, this function I function accurately as the function SUMPRODUCT alone that done in VBA.
Function VlookupAllSum(name As String, IntervalSearches As Range, IntervalReturn As Range) As Variant ' as integer para valores até 32.767
Dim Valor, Nome
Dim lin, col As Integer
Dim Total
Application.Volatile
lin = 1
col = lin
For Each Nome In IntervalSearches
If Nome = name Then
Valor = IntervalReturn(lin, col)................
I am trying to create a shift roster for my team. My team work in general shift (GS), second shift (SS), third shift (TS). There are situations where some team members come in any of these shift but had to leave midway due to feeling well, so that should be counted as half day. This half day scenario may be in any case GS/SS/TS. I am using COUNTIF to get the sum of GS/SS/TS for each employee which is giving a whole number. I also want to incorporate 3 different variations of half day as Half Day GS (HG), Half Day SS (HS), Half Day TS (HT). My expectation is that for each Half Day only 0.5 should be added in a appropriate shift, but COUNTIF is always counting this as 1. How I can achieve this using countif or any other Excel function? Sample sheet is attached.
View 3 Replies View RelatedI'm looking for a formula that acts the same way as the subtotal formula (revises if rows are hidden and only adds visible rows). Is there anyway to get this removal of hidden rows but for subtraction?
View 3 Replies View RelatedI have a command button that runs a macro to insert two new rows between row 15 and 16 no real problem (see code & sheet below), but I would like the Total Hours and Total Cost rows to include the newly added rows i.e.
Rows 16 & 17
Cell B18 now contains =B2+B4+B6+B8+B10+B12+B14+B16
and
Cell B19 now contains =B3+B5+B7+B9+B11+B13+B15+B17
If another two rows are added then Total Hours and Total Cost Cells 20 & 21 will now be
Cell B20 now contains =B2+B4+B6+B8+B10+B12+B14+B16+B18
and
Cell B21 now contains =B3+B5+B7+B9+B11+B13+B15+B17+B19
Command button Code to insert row
Code:
Private Sub CommandButton1_Click()
Const fWhat As String = "EXTERNAL"
Dim sR As Range, fR As Range, fAdr As String, nRw As Long
Set sR = Range("A1:C187")
[Code] ..........
Worksheet Below
1
Hours
170
Cost
387.99
[Code] ...........
make a calculation(addition) and use the answer to multiply against another addition calculation....
The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.
I want to get the sum of the multiplication of two columns. Why the macro is needed?
Because I want always to multiply the first column with a series of column combinations. At the end I want to get a number for each case.
Example.
I have 4 columns (this can vary). I want to perform:
A*B, A*C, A*C, A*(B+C)
what i am trying to do is multiply the numbers in two seperate cells on the same row (e.g. C1*D1) and do this for the whole column where there is data (so it could go down to (C9*D9)
I was wondering how I would execute this in a macro, I am also looking to show the total value of all these added together but one step at a time
As I have illustrated in the example below, I want to multiply a value by 1.(something). The 1. is always constant, where the I8 cell is variable. I can't get this to work.
=H15*1.(I8)
I have a worksheet with many lines of inputted numbers (values). I want to divide each number in the sheet by 4. However, I don't want to move any of the numbers because other sheet in the workbook refer to these cells. Does anyone know how i can do this easily?
View 3 Replies View RelatedUsing array
Part 1:
1. Create a Multipication Table up to 10x10.
2. Store the values in a multidimensional array.
3. The program should ask the user what two numbers from 1-10 would he like to multiply.
4. The program should not multiply the two numbers but instead use the two numbers as reference for the element number and locate the corresponding element.
5. The corresponding element should have the value same as the product of the two numbers entered by the user.
Part 2:
1. Do the same as Part 1 but this time automate the creation of the multiplication table using the concept of array.
Here's what I've done so far for part 1
[Code]...
But when I enter the two numbers It just displays the value in cells(2,6)
Attached File : table.xls‎ ..
1) I have declared:
Mtrx(20,20) as Integer, where i have a Matrix
1 2 3
1 2 3
How can I do an inverse of this matrix using only VBA commands?
2) I have :
Mtrx(20,20) as Integer, for example :
3 1
2 0
and Mtrx1(20,20) as Integer :
1 2 0
0 1 1
How to multiply these matrices using only VBA ?
I am writing a spreadsheet as a report for a customer and i want to show the following in the sheet.
A customer buys 12 of XProduct (retails £2)
A customer buys 15 of YProduct (retails £3)
A customer buys 20 of ZProduct (retails £5)
I want the sheet to have columns stating - Amount Bought - Product - Gross Amount.
And i want to be able to have the product column intelligent enough to know that if i type any of my products sold it will automatically attribute the correct cost (i.e. I type in Xproduct and it knows that value is £2) so that in the Gross Amount column it will all make sense, and save me having to manually put in the retail cost each time which will occasionally change. At present i have the same three columns and i multiply the Amount Bought with what i know is the cost and do the sum myself and then enter the result in excel -
I have three reference cells (a1, a2, a3).
Below, starting from b4 to l4 I have years from 2005 to 2015, row 5 for the same range contains data, row 6 (c to l) contains a growth rate.
I need to come up with a formula that can multiply (x * y * z *... [product-like formula]) the growth rates for all the years where the current year (row 4) is bigger than reference the reference year in a1 or smaller than reference year in a2. A3 is then used to multiply that total.
If I wanted to get a cell, say A1, to multiply a value, for example 7, by the results in another cell, say B1, but NOT multiply if that cell's value is a minus number, is there a way of getting Excel to do that?
Normally I'd just type =SUM(A1*B1)*7, but how can that be reconfigured to ignore minus numbers? e.g. if B1 contained -5, ?
Here's what I'd like to do:
Have 10 columns... one column would be for the "1s", another for the "2s", another for the "3s", etc...
But I don't want to have them in straight order (i.e. 1 x 1 =, 1 x 2 =, 1 x 3 =, etc...) because the pattern is easily memorized, no matter what number he's working on.
I'd like to be able to hit a button (or something) and have each column shuffle (or randomize) the order in which the equations will be displayed.
So, a column might come up 3 x 6 =, 3 x 9 =, 3 x 1 =, 3 x 4 =, etc...
And next time it might come up 3 x 5 =, 3 x 2 =, 3 x 4 =, etc...
This way he won't be able to memorize any patterns and he'll actually need to learn his multiplication tables.
I just started using VBA and WOW at the possibilities!! I have some data I am trying to calculate and decided upon researching VBA that this would be the easiest way to do what I need to. The code goes through no errors but D2 is .0001 and N2 is 12000 and the answer I get when I multiply the 2 through VBA is 0.000 however if I change the number in D2 to 2 then I get 24000. I tried the help menu and possibly this is because I didn't do something right with the decimal?
View 3 Replies View RelatedOn the PROPOSAL tab, at I41, a simple multiplication instruction is wrong. It's multiplying 72*186.53 which = 13430.16 in the real world, but on this sheet 11 cents are missing. I'm pulling my hair out on this one....
View 4 Replies View RelatedIn a range ("A1:A30") are values, What I need to do is have those values multipled by 1.07 and the new value incerter in the cell using VBA, I dont wantto use a formula.
View 5 Replies View RelatedI have to maintain freight cost according to the shipment weight. Our shipper has different charges for different scale/quantity of shipment. For example, according to the attached picture; Rate for up to 10 Kilo is $ 20 per kilo. For weight more than 10 kilo and up to 20 kilo, Rate will be $ 15 per kilo and so on.
Now, suppose my shipment weight is 28 kilo. My cost will be $ 200 for 10 kg, $ 150 for next 10 kg and $ 80 for the last 8 kg. In total $ 430.
I have to calculate the total cost separately. I wonder if I could devise a formula by which I could put the weight in a single cell and get the freight cost instantly.
Problem solving multiplication of two matrices with entries decimal in vba code:
Code:
Option Explicit
Public MatrixA(30, 30) As Long
Public MatrixB(30, 30) As Long
Public MatrixC(30, 30) As Long
Public RowA As Integer
Public ColA As Integer
Public RowB As Integer
Public ColB As Integer
Function ProperMaticesSizes() As Boolean
[Code] .........
I'm trying to make a table of the total amount of a liquid used throughout the day. Here is what I am trying to do: In cell D4, I want to be able to enter something similar to the following: 3cup+2bottle+1liter
and by doing so, Excel can automatically recognize that 1cup is 8oz, 1bottle is 17oz, and 1liter is 34 oz because of the reference chart provided on the side. Also, it would be able to notice the 3, 2, and 1 amounts so it would multiply accordingly so it would know to do this: (3*8)+(2*17)+(1*34)
and then put the calculated amount in the cell. The correct answer should be 92oz. Is there a way for Excel to recognize the conversions (i.e. whenever it sees 'cup' it will multiply by 8) and multiplication factors (i.e. 3, 2, 1)?Is there a formula I can enter that I can just "drag" down to the upcoming days in column D?
I know I can just do something like this: (3*G4)+(2*G5)+(1*G6).
I am trying to multiply one array of prices for multiple input products across
the volume that that product my go into multiple end products.
I know you can use SUMPRODUCT with two arrays that are equal BUT I want to Multiply the price matrix across 15 or 16 other matrices and sum all the products.
The price matrix and the other arrays are all 1 x "whatever".
Sum every instance of [SPREAD]*[SIZE] where [NAME] occurs within a text string.
Please note, I'm trying to do this without creating a new column [SPREAD]*[SIZE].
I wanted to have the weeks of the month down one column = 52 week.
down the next column I have different amounts of money in that week.
some months have 4 weeks and other have 5. I wanted a program to say:
If you see a month "x" look at the next column and take that amount. Then on the next row you have month "x" again (week 2) go to the next column and take that amount and add it to week one. And so on until all 4/5 week are added to give on result.
Then the same for the next month...
month amount/week amount/month
05-Mar 0
12-Mar 70
19-Mar 210
26-Mar 350 1050
02-Apr 420
09-Apr 455......
I am hoping someone with excel experience can be of help to me with an unusual request for excel.
Assume cell A1 = 2, B1 = 3 and i wish the sum of this (5) to appear in cell C1. Very straight forward so far, however i wish the result to appear in C1 when i left click on a cell other than C1, say for example D7.
I can't use any macros for this.
I need to C8 - C19 only to add up jobs won by andrew (in current orders). It needs to be month specific. what i mean by that is I need the formula to do what its doing now (adding up the jobs by and putting the totals into the according cell depending on what month they were won.
View 2 Replies View Related