Attributing Values And Multiplication
Apr 25, 2007
I am writing a spreadsheet as a report for a customer and i want to show the following in the sheet.
A customer buys 12 of XProduct (retails £2)
A customer buys 15 of YProduct (retails £3)
A customer buys 20 of ZProduct (retails £5)
I want the sheet to have columns stating - Amount Bought - Product - Gross Amount.
And i want to be able to have the product column intelligent enough to know that if i type any of my products sold it will automatically attribute the correct cost (i.e. I type in Xproduct and it knows that value is £2) so that in the Gross Amount column it will all make sense, and save me having to manually put in the retail cost each time which will occasionally change. At present i have the same three columns and i multiply the Amount Bought with what i know is the cost and do the sum myself and then enter the result in excel -
View 9 Replies
ADVERTISEMENT
May 20, 2014
I have a big excel sheet with number plates and attributed to them: velocity, times, dates, etc. In the second external source i have csv with another data, now without anything more than number plate & car type. I want to merge this data in the way that i would have information of car type in the excel worksheet with number plates and dates (so essentially merge the second with the first.
It's more than possible that in the second file number plates will be attributed to more than one type of car, as this process was done automatically.
View 6 Replies
View Related
Jul 8, 2006
I have a worksheet with many lines of inputted numbers (values). I want to divide each number in the sheet by 4. However, I don't want to move any of the numbers because other sheet in the workbook refer to these cells. Does anyone know how i can do this easily?
View 3 Replies
View Related
Sep 25, 2011
In a range ("A1:A30") are values, What I need to do is have those values multipled by 1.07 and the new value incerter in the cell using VBA, I dont wantto use a formula.
View 5 Replies
View Related
Jul 10, 2014
I want to get the sum of the multiplication of two columns. Why the macro is needed?
Because I want always to multiply the first column with a series of column combinations. At the end I want to get a number for each case.
Example.
I have 4 columns (this can vary). I want to perform:
A*B, A*C, A*C, A*(B+C)
View 4 Replies
View Related
Oct 6, 2012
what i am trying to do is multiply the numbers in two seperate cells on the same row (e.g. C1*D1) and do this for the whole column where there is data (so it could go down to (C9*D9)
I was wondering how I would execute this in a macro, I am also looking to show the total value of all these added together but one step at a time
View 8 Replies
View Related
Feb 19, 2009
As I have illustrated in the example below, I want to multiply a value by 1.(something). The 1. is always constant, where the I8 cell is variable. I can't get this to work.
=H15*1.(I8)
View 9 Replies
View Related
Jan 27, 2009
I obviously know less about functions than I thought I did. I've got the attached spreadsheet set up except getting totals at the bottom. The production total L44, would be column A multiplied by the quantity entered in columns L and summed. Same for Total SF, square footage in column B times quantity in L and summed at the bottom. This would continue daily, needing sums under each column.
View 4 Replies
View Related
Aug 1, 2014
Using array
Part 1:
1. Create a Multipication Table up to 10x10.
2. Store the values in a multidimensional array.
3. The program should ask the user what two numbers from 1-10 would he like to multiply.
4. The program should not multiply the two numbers but instead use the two numbers as reference for the element number and locate the corresponding element.
5. The corresponding element should have the value same as the product of the two numbers entered by the user.
Part 2:
1. Do the same as Part 1 but this time automate the creation of the multiplication table using the concept of array.
Here's what I've done so far for part 1
[Code]...
But when I enter the two numbers It just displays the value in cells(2,6)
Attached File : table.xls‎ ..
View 1 Replies
View Related
Nov 30, 2008
1) I have declared:
Mtrx(20,20) as Integer, where i have a Matrix
1 2 3
1 2 3
How can I do an inverse of this matrix using only VBA commands?
2) I have :
Mtrx(20,20) as Integer, for example :
3 1
2 0
and Mtrx1(20,20) as Integer :
1 2 0
0 1 1
How to multiply these matrices using only VBA ?
View 9 Replies
View Related
Aug 4, 2009
I have three reference cells (a1, a2, a3).
Below, starting from b4 to l4 I have years from 2005 to 2015, row 5 for the same range contains data, row 6 (c to l) contains a growth rate.
I need to come up with a formula that can multiply (x * y * z *... [product-like formula]) the growth rates for all the years where the current year (row 4) is bigger than reference the reference year in a1 or smaller than reference year in a2. A3 is then used to multiply that total.
View 6 Replies
View Related
Oct 7, 2009
If I wanted to get a cell, say A1, to multiply a value, for example 7, by the results in another cell, say B1, but NOT multiply if that cell's value is a minus number, is there a way of getting Excel to do that?
Normally I'd just type =SUM(A1*B1)*7, but how can that be reconfigured to ignore minus numbers? e.g. if B1 contained -5, ?
View 10 Replies
View Related
Aug 9, 2013
Here's what I'd like to do:
Have 10 columns... one column would be for the "1s", another for the "2s", another for the "3s", etc...
But I don't want to have them in straight order (i.e. 1 x 1 =, 1 x 2 =, 1 x 3 =, etc...) because the pattern is easily memorized, no matter what number he's working on.
I'd like to be able to hit a button (or something) and have each column shuffle (or randomize) the order in which the equations will be displayed.
So, a column might come up 3 x 6 =, 3 x 9 =, 3 x 1 =, 3 x 4 =, etc...
And next time it might come up 3 x 5 =, 3 x 2 =, 3 x 4 =, etc...
This way he won't be able to memorize any patterns and he'll actually need to learn his multiplication tables.
View 14 Replies
View Related
Apr 2, 2009
I just started using VBA and WOW at the possibilities!! I have some data I am trying to calculate and decided upon researching VBA that this would be the easiest way to do what I need to. The code goes through no errors but D2 is .0001 and N2 is 12000 and the answer I get when I multiply the 2 through VBA is 0.000 however if I change the number in D2 to 2 then I get 24000. I tried the help menu and possibly this is because I didn't do something right with the decimal?
View 3 Replies
View Related
Nov 7, 2008
On the PROPOSAL tab, at I41, a simple multiplication instruction is wrong. It's multiplying 72*186.53 which = 13430.16 in the real world, but on this sheet 11 cents are missing. I'm pulling my hair out on this one....
View 4 Replies
View Related
Apr 12, 2008
Take a single cell in column D, and multiply it by a single cell in column E, which will equal F. Take column F, and multiply it by .02 (2%), which will equal G. Take a cell in column G, and subtract it from F, which will equal I. And this all takes place in the same row. Then have it move down to the next row, and do the same thing..... so it would basically look like this.....
A B C D E F G H I
1 D1 E1 (D1*E1) (F1*.02) (G1-F1)
2 D2 E2 (D2*E2) (F2*.02) (G2-F2)
3 D3 E3 (D3*E3) (F3*.02) (G3-F3)
For easier reading.... in each row I want it to do the following math
D*E=F
F*.02=G
G-F=I
And then do it for every row that I have data in (excluding the VERY first row). I am -COMPLETELY- sorry if I broke any rules, and am also sorry for the poor representation
View 5 Replies
View Related
Oct 20, 2012
I have two columns of data in an excel sheet that are equal in size and both only contain numbers.
I'm trying to write a macros which will put both of these sets into arrays, then perform a calculation on them.
Specifically ArrayA + 3*ArrayB then put the result back into the worksheet in a new column. Below is the code I have so far.
Dim ArrayA As Variant
Dim ArrayB As Variant
Dim ArrayC As Variant
ArrayA = Worksheets("Sheet1").Range("A1:A5")
ArrayB = Worksheets("Sheet1").Range("B1:B5")
This is where things go bad
ArrayC = ArrayA + 3 * ArrayB
View 4 Replies
View Related
Dec 18, 2013
I have to maintain freight cost according to the shipment weight. Our shipper has different charges for different scale/quantity of shipment. For example, according to the attached picture; Rate for up to 10 Kilo is $ 20 per kilo. For weight more than 10 kilo and up to 20 kilo, Rate will be $ 15 per kilo and so on.
Now, suppose my shipment weight is 28 kilo. My cost will be $ 200 for 10 kg, $ 150 for next 10 kg and $ 80 for the last 8 kg. In total $ 430.
I have to calculate the total cost separately. I wonder if I could devise a formula by which I could put the weight in a single cell and get the freight cost instantly.
View 2 Replies
View Related
Mar 16, 2014
Problem solving multiplication of two matrices with entries decimal in vba code:
Code:
Option Explicit
Public MatrixA(30, 30) As Long
Public MatrixB(30, 30) As Long
Public MatrixC(30, 30) As Long
Public RowA As Integer
Public ColA As Integer
Public RowB As Integer
Public ColB As Integer
Function ProperMaticesSizes() As Boolean
[Code] .........
View 1 Replies
View Related
May 20, 2009
I'm trying to make a table of the total amount of a liquid used throughout the day. Here is what I am trying to do: In cell D4, I want to be able to enter something similar to the following: 3cup+2bottle+1liter
and by doing so, Excel can automatically recognize that 1cup is 8oz, 1bottle is 17oz, and 1liter is 34 oz because of the reference chart provided on the side. Also, it would be able to notice the 3, 2, and 1 amounts so it would multiply accordingly so it would know to do this: (3*8)+(2*17)+(1*34)
and then put the calculated amount in the cell. The correct answer should be 92oz. Is there a way for Excel to recognize the conversions (i.e. whenever it sees 'cup' it will multiply by 8) and multiplication factors (i.e. 3, 2, 1)?Is there a formula I can enter that I can just "drag" down to the upcoming days in column D?
I know I can just do something like this: (3*G4)+(2*G5)+(1*G6).
View 2 Replies
View Related
Jul 24, 2008
I am trying to multiply one array of prices for multiple input products across
the volume that that product my go into multiple end products.
I know you can use SUMPRODUCT with two arrays that are equal BUT I want to Multiply the price matrix across 15 or 16 other matrices and sum all the products.
The price matrix and the other arrays are all 1 x "whatever".
View 9 Replies
View Related
Feb 17, 2009
Sum every instance of [SPREAD]*[SIZE] where [NAME] occurs within a text string.
Please note, I'm trying to do this without creating a new column [SPREAD]*[SIZE].
View 11 Replies
View Related
May 16, 2013
I want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
View 8 Replies
View Related
Apr 30, 2014
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
View 1 Replies
View Related
Mar 2, 2014
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
View 3 Replies
View Related
Jun 3, 2009
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
View 13 Replies
View Related
May 22, 2014
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
View 4 Replies
View Related
Mar 26, 2014
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb‎
View 5 Replies
View Related
Sep 15, 2013
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
View 7 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
