I want to get the sum of the multiplication of two columns. Why the macro is needed?
Because I want always to multiply the first column with a series of column combinations. At the end I want to get a number for each case.
Example.
I have 4 columns (this can vary). I want to perform:
A*B, A*C, A*C, A*(B+C)
what i am trying to do is multiply the numbers in two seperate cells on the same row (e.g. C1*D1) and do this for the whole column where there is data (so it could go down to (C9*D9)
I was wondering how I would execute this in a macro, I am also looking to show the total value of all these added together but one step at a time
As I have illustrated in the example below, I want to multiply a value by 1.(something). The 1. is always constant, where the I8 cell is variable. I can't get this to work.
=H15*1.(I8)
I have a worksheet with many lines of inputted numbers (values). I want to divide each number in the sheet by 4. However, I don't want to move any of the numbers because other sheet in the workbook refer to these cells. Does anyone know how i can do this easily?
View 3 Replies View RelatedI obviously know less about functions than I thought I did. I've got the attached spreadsheet set up except getting totals at the bottom. The production total L44, would be column A multiplied by the quantity entered in columns L and summed. Same for Total SF, square footage in column B times quantity in L and summed at the bottom. This would continue daily, needing sums under each column.
View 4 Replies View RelatedUsing array
Part 1:
1. Create a Multipication Table up to 10x10.
2. Store the values in a multidimensional array.
3. The program should ask the user what two numbers from 1-10 would he like to multiply.
4. The program should not multiply the two numbers but instead use the two numbers as reference for the element number and locate the corresponding element.
5. The corresponding element should have the value same as the product of the two numbers entered by the user.
Part 2:
1. Do the same as Part 1 but this time automate the creation of the multiplication table using the concept of array.
Here's what I've done so far for part 1
[Code]...
But when I enter the two numbers It just displays the value in cells(2,6)
Attached File : table.xls‎ ..
1) I have declared:
Mtrx(20,20) as Integer, where i have a Matrix
1 2 3
1 2 3
How can I do an inverse of this matrix using only VBA commands?
2) I have :
Mtrx(20,20) as Integer, for example :
3 1
2 0
and Mtrx1(20,20) as Integer :
1 2 0
0 1 1
How to multiply these matrices using only VBA ?
I am writing a spreadsheet as a report for a customer and i want to show the following in the sheet.
A customer buys 12 of XProduct (retails £2)
A customer buys 15 of YProduct (retails £3)
A customer buys 20 of ZProduct (retails £5)
I want the sheet to have columns stating - Amount Bought - Product - Gross Amount.
And i want to be able to have the product column intelligent enough to know that if i type any of my products sold it will automatically attribute the correct cost (i.e. I type in Xproduct and it knows that value is £2) so that in the Gross Amount column it will all make sense, and save me having to manually put in the retail cost each time which will occasionally change. At present i have the same three columns and i multiply the Amount Bought with what i know is the cost and do the sum myself and then enter the result in excel -
I have three reference cells (a1, a2, a3).
Below, starting from b4 to l4 I have years from 2005 to 2015, row 5 for the same range contains data, row 6 (c to l) contains a growth rate.
I need to come up with a formula that can multiply (x * y * z *... [product-like formula]) the growth rates for all the years where the current year (row 4) is bigger than reference the reference year in a1 or smaller than reference year in a2. A3 is then used to multiply that total.
If I wanted to get a cell, say A1, to multiply a value, for example 7, by the results in another cell, say B1, but NOT multiply if that cell's value is a minus number, is there a way of getting Excel to do that?
Normally I'd just type =SUM(A1*B1)*7, but how can that be reconfigured to ignore minus numbers? e.g. if B1 contained -5, ?
Here's what I'd like to do:
Have 10 columns... one column would be for the "1s", another for the "2s", another for the "3s", etc...
But I don't want to have them in straight order (i.e. 1 x 1 =, 1 x 2 =, 1 x 3 =, etc...) because the pattern is easily memorized, no matter what number he's working on.
I'd like to be able to hit a button (or something) and have each column shuffle (or randomize) the order in which the equations will be displayed.
So, a column might come up 3 x 6 =, 3 x 9 =, 3 x 1 =, 3 x 4 =, etc...
And next time it might come up 3 x 5 =, 3 x 2 =, 3 x 4 =, etc...
This way he won't be able to memorize any patterns and he'll actually need to learn his multiplication tables.
I just started using VBA and WOW at the possibilities!! I have some data I am trying to calculate and decided upon researching VBA that this would be the easiest way to do what I need to. The code goes through no errors but D2 is .0001 and N2 is 12000 and the answer I get when I multiply the 2 through VBA is 0.000 however if I change the number in D2 to 2 then I get 24000. I tried the help menu and possibly this is because I didn't do something right with the decimal?
View 3 Replies View RelatedOn the PROPOSAL tab, at I41, a simple multiplication instruction is wrong. It's multiplying 72*186.53 which = 13430.16 in the real world, but on this sheet 11 cents are missing. I'm pulling my hair out on this one....
View 4 Replies View RelatedIn a range ("A1:A30") are values, What I need to do is have those values multipled by 1.07 and the new value incerter in the cell using VBA, I dont wantto use a formula.
View 5 Replies View RelatedTake a single cell in column D, and multiply it by a single cell in column E, which will equal F. Take column F, and multiply it by .02 (2%), which will equal G. Take a cell in column G, and subtract it from F, which will equal I. And this all takes place in the same row. Then have it move down to the next row, and do the same thing..... so it would basically look like this.....
A B C D E F G H I
1 D1 E1 (D1*E1) (F1*.02) (G1-F1)
2 D2 E2 (D2*E2) (F2*.02) (G2-F2)
3 D3 E3 (D3*E3) (F3*.02) (G3-F3)
For easier reading.... in each row I want it to do the following math
D*E=F
F*.02=G
G-F=I
And then do it for every row that I have data in (excluding the VERY first row). I am -COMPLETELY- sorry if I broke any rules, and am also sorry for the poor representation
I have two columns of data in an excel sheet that are equal in size and both only contain numbers.
I'm trying to write a macros which will put both of these sets into arrays, then perform a calculation on them.
Specifically ArrayA + 3*ArrayB then put the result back into the worksheet in a new column. Below is the code I have so far.
Dim ArrayA As Variant
Dim ArrayB As Variant
Dim ArrayC As Variant
ArrayA = Worksheets("Sheet1").Range("A1:A5")
ArrayB = Worksheets("Sheet1").Range("B1:B5")
This is where things go bad
ArrayC = ArrayA + 3 * ArrayB
I have to maintain freight cost according to the shipment weight. Our shipper has different charges for different scale/quantity of shipment. For example, according to the attached picture; Rate for up to 10 Kilo is $ 20 per kilo. For weight more than 10 kilo and up to 20 kilo, Rate will be $ 15 per kilo and so on.
Now, suppose my shipment weight is 28 kilo. My cost will be $ 200 for 10 kg, $ 150 for next 10 kg and $ 80 for the last 8 kg. In total $ 430.
I have to calculate the total cost separately. I wonder if I could devise a formula by which I could put the weight in a single cell and get the freight cost instantly.
Problem solving multiplication of two matrices with entries decimal in vba code:
Code:
Option Explicit
Public MatrixA(30, 30) As Long
Public MatrixB(30, 30) As Long
Public MatrixC(30, 30) As Long
Public RowA As Integer
Public ColA As Integer
Public RowB As Integer
Public ColB As Integer
Function ProperMaticesSizes() As Boolean
[Code] .........
I'm trying to make a table of the total amount of a liquid used throughout the day. Here is what I am trying to do: In cell D4, I want to be able to enter something similar to the following: 3cup+2bottle+1liter
and by doing so, Excel can automatically recognize that 1cup is 8oz, 1bottle is 17oz, and 1liter is 34 oz because of the reference chart provided on the side. Also, it would be able to notice the 3, 2, and 1 amounts so it would multiply accordingly so it would know to do this: (3*8)+(2*17)+(1*34)
and then put the calculated amount in the cell. The correct answer should be 92oz. Is there a way for Excel to recognize the conversions (i.e. whenever it sees 'cup' it will multiply by 8) and multiplication factors (i.e. 3, 2, 1)?Is there a formula I can enter that I can just "drag" down to the upcoming days in column D?
I know I can just do something like this: (3*G4)+(2*G5)+(1*G6).
I am trying to multiply one array of prices for multiple input products across
the volume that that product my go into multiple end products.
I know you can use SUMPRODUCT with two arrays that are equal BUT I want to Multiply the price matrix across 15 or 16 other matrices and sum all the products.
The price matrix and the other arrays are all 1 x "whatever".
Sum every instance of [SPREAD]*[SIZE] where [NAME] occurs within a text string.
Please note, I'm trying to do this without creating a new column [SPREAD]*[SIZE].
I want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm using Win 8.1, Office 2013.
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies View RelatedI have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
I have been researching this for 3 days and I cannot find a solution. I have City, State information in A1. I also have City, State information in B1. I need to put them into City (D1) and State (E1).
View 4 Replies View Related