Named Range Of Variable Size

Aug 23, 2007

I am attempting to create a rather complex macro to format periodic raw data being made available to me; this data centers around a main column. The column of interest in these raw data reports is of variable length; I wish to apply a name to this column in order to make it easier to perform calculations. I know how to write VBA code to select every cell in a column down to the point at which the column becomes empty space, regardless of how much data is in the column, and I wish a include naming of the range in the macro. However, all my resources imply you must give the exact definitions of the range when writing the name application in VBA. Does anyone know if there is a way to include naming of a range in a macro without knowing the range's exact size? Put another way, is there any way to apply a name to an already-selected group of cells without giving the exact dimensions?

View 2 Replies


ADVERTISEMENT

Indirect Referral To Variable Size Named Ranges

Feb 13, 2007

I am trying to use a combination of dependent named ranges and variable length ranges, so one can select in eg Col A truck name from a drop down list, and then in Col B, the engine variant only for that make of truck. The indirect(substitute) function works well if I define the dependent range name (the engine variant) using actual cell refs. However if I use the variable length name definition as described in Ozgrid (ie with offset function), I get an error message and the dropdown menu freezes. Is there anyway to overcome this without resorting to VBA?

View 4 Replies View Related

Formula With Variable Range Size

Nov 27, 2007

It is useful to use lookup function to find the student name. However, if the table array size is variable

(say, a new student enrolled and the table array will be $A$2:$B$7), the table array size will be changed

and we need to change the vlookup function. How to avoid it? Can we use some kind of variable for the

See attached file( book1)

View 9 Replies View Related

Variable Named Range Sort VBA

Oct 8, 2009

In column B, I have a series of named ranges. The named ranges can vary in order. If I wish to reference a range from a named range say Range("I") to the next unkown named range,

View 9 Replies View Related

Assign Named Range To A Vba Range Variable?

Jan 25, 2013

I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")

I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.

the first two lines of code work fine, the msgbox shows "E100:E105", happy days!

However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.

VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup

MsgBox Range(thisString).Address

Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)

View 1 Replies View Related

Set Variable To Named Range Or Single Cell

Nov 30, 2008

The problem exists with the lists I use. I have a "settings" sheet, where users can choose from preset values to run in the program. E.g. "Urgent", "Semi Urgent" and "Non Urgent" (there are a lot more values, but those will do for now." and the idea is to run them 1 at a time.

However, I've now determined that 99% of the time, they're going to be run 1 after another, that is to say run the program once for "Urgent", then again for "Semi Urgent" and then again for "Non Urgent". So I'd like to loop through these. Again, not a problem, you'd think.

So I added a new value to the list; "All" which users can select to invoke a list. Again, not a problem, I already have the list as a named range, "DmgList" and I can cycle through it. I ran the following test code to see if it would work in theory...

View 4 Replies View Related

Using Vlookup Where Table_array Is A Variable That Corresponds To A Named Range

Sep 28, 2009

I'm trying to write a vlookup where both the lookup value and the table_array are variables. What I'm trying to do is get a set of dependent drop down boxes to serve as the input for vlookup. The first drop down box contains a list of named ranges and the second contains a list of possible search values. If I manually input the name the function works, but if I refer to it with a cell reference or the indirect funtion it fails. For example:

View 2 Replies View Related

Updating Named Range When New Contact Is Added Using R1C1 Format With A Variable

Feb 1, 2010

The code below is for a macro that allows the user to create a list of contacts. The column containing the names of these contacts are then referenced by a userform (code not present) by way of a Named Range. I want to update the named range whenever the user adds another contact so this new contact shows up in the user form.

I am currently referencing the range containing the names using R1C1 style, but I cannot get the variable aspect to work correctly.

View 2 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Declare An Array With Variable Size

May 7, 2009

I need to create an array with a variable as it size For instance:

View 2 Replies View Related

Creating Matrix With Variable Size

Nov 19, 2012

I am trying to create a matrix in VBA with variable matrix size. The matrix I need will be anywhere from 3 to 9 columns and 15 to 30 rows. I want to set the size as variables and then create the Matrix using these variables, similar to:

rows = 4
columns = 25
Dim XMatrix(rows, columns) As Variant

View 1 Replies View Related

Display Array In Variable Size Userform

Jan 23, 2008

I am trying to figure out how to make a userform to display the contents of a 2-D array which has a variable number of rows. I want the userform to height of the userform to correspond with the number of rows of data to display.

I don't have much experience with userforms, but here's what I was thinking:
VBA code which would find the # of rows of data and then adjust the height of the userform and the length of the lable (which the data would go in).

View 4 Replies View Related

Adding A Constant To Sets Of Rows Of Variable Size

Jul 30, 2009

I have data from 100 trials. Each trial has a variable number of data points (rows), but each row is labeled in the first column with the trial number. I would like a macro to identify the first row of each trial, calculate the difference of the value of the cell in column G of that row from a constant (718), and then add that difference to that cell and all other cells in that column of that trial.

So based on the attached sample, I would like all values in column G for trial 2 to be +1, for trial 3 to be -5, and for trial 4 to be +2.

In the file, I've cleared all the data from the impertinent columns. Eventually, I will also want to perform a similar process on column H but with a different constant.

View 2 Replies View Related

Find Variable Size Number Within Text String

Sep 20, 2007

I have a spreadsheet with a couple of hundred rows on each tab that looks like this: A1: #1 PENROSE TIJUANA MAMA PCH 2620039190 665794 12.00 CT 1 Front 1 1 1. The only constant is the 10 digit number followed by the 6 digit number in the middle and I want to use it to parse the text string. I want the output to be everything prior to the 10 digit number in A1, the 10 digit number in B1, the 6 digit number in c1 and everything else in D1 and so on through the rows.

View 4 Replies View Related

Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This

Jun 2, 2006

I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...

View 2 Replies View Related

Making Named Range The Last Active Value Used Within Another Named Range?

Jul 19, 2013

I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.

Picture2.jpg

Using the following code when updating just one criteria with several charts

VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....

which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.

View 2 Replies View Related

Countif- Use A Named Criteria As Well As A Named Range

Oct 25, 2009

if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,

View 9 Replies View Related

Combine Two Named Ranges Into 3rd Named Range

Mar 14, 2013

Merge two columns into one list in excel

I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).

Here's the formula from the example:

Code:

=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))

I've played around with it, but could not come with any that worked.

View 3 Replies View Related

Select Entire Row With A Named Variable

Feb 6, 2007

I have this problem quite often and always have to think of a way around it, however I think there must be a simple method of doing what I want.

If I want to select row three, I would write:

Rows("3:3").Select

However, if I have a variable which holds my row number how do I rewrite the above code? I've tried serveral varations of:

Rows("CurrentRow:CurrentRow").Select

View 9 Replies View Related

Cutting And Pasting Varying Size Range To Next Available Row In Another Range (on Another Worksheet)

Jun 25, 2014

code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.

I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.

The following code is done up to the point where I cut my selection.

Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range

[Code]....

View 5 Replies View Related

Retrieve Password From Named Variable After Closing?

May 14, 2014

I've named the password to my protected workbook using this code:

ActiveWorkbook.Names.Add Name:="password", RefersTo:=pWord1

I then want to be able to close down Excel, switch off the computer, open all back up again and retrieve the password. I've tried the code:

pWord1 = Evaluate(ActiveWorkbook.Names("password").RefersTo)

But I get this:

Run-time error '1004': Application-defined or object-defined error

How to retrieve the password from the named variable after closing?

This is to protect and unprotect the workbook whenever I open and close it to timestamp a spreadsheet in it. I don't want the daily user to be able to see the time stamped spreadsheet and so need to keep it hidden and the spreadsheet protected over the course of many days when I'm not round.

View 2 Replies View Related

Copy/Paste Range To Different Size/Shape Range

Mar 3, 2008

I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?

2) Do not run that part of the macro if there is an error?

Thanks so much for reading this long-winded description but the error is a big problem

Private Sub CommandButton1_Click()

Import_Data_Form.Hide

Run "UnProtectAll"

Set b = Selection
ad = b.Address

' Local Variables
Dim wkbDataFile As Workbook

View 4 Replies View Related

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

Center Image In The Middle Of Cell Where Cell Size Is Variable

Apr 12, 2013

The idea is to center an image in the middle of a cell where the cell's size is variable. This shall be done for a column of images if a certain cell in the same row contains content different from 0. If not the image shall be invisible.

Sub Center()Dim Position As Integer
Dim Picture As Integer
Picture = 6
For Position = 7 To 320If Sheets("List of Measures").Cells(Position, 2).Value

[Code] ......

Run-time error 1004: Application-defined or object-defined error?

View 7 Replies View Related

String Variable To Call Defined Range Variable

Nov 10, 2006

Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?

I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.

View 5 Replies View Related

Set Range Of Varying Size

May 19, 2007

I am try to Set a range to a variable. The problem is the range differs in size. The good thing is there is a blank cell before each group that I am attempting to set the range to. I know it should be possible to set the range to stop at the blank row. I am locating the correct row by the date and want to set the range to include the next three cells to the right and all the cells below them up to the blank row.

View 5 Replies View Related

Autofill With Range That Is Column Variable And Row Variable

Apr 4, 2008

I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this

View 9 Replies View Related

Change Size Of Range Dynamically

Aug 10, 2007

Need assistance with this code provided by SHG. See attached sample. I need to create a range called DaysOff so that this function will work. As it is the function is perfect; though the accuracy if the result is dependent on the exact range, thus I need this named range to be dynamic. I have tried but it does not seem to work correctly. The named range should refer to the list of names between 1-10. The range should dynamically include any names that are listed.

Public DaysOff As Range
Function datNext(datLast As Date, DaysOff As Range) As Date
Dim datBeg As Date, datEnd As Date
Dim iLastPd As Integer
Dim iDay As Long, nDay As Long
Dim iYr As Integer, iMo As Integer
iYr = Year(datLast)
iMo = Month(datLast)
datBeg = DateSerial(iYr, iMo + 1, 1)
datEnd = DateSerial(iYr, iMo + 2, 0)
iLastPd = Pd(datLast)
nDay = DaysOff.Rows.Count
Do.......................................

View 2 Replies View Related

Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved