I have the task of creating a spreadsheet that will track and give point value to our sales reps' daily accessory sales. The following is the point value criteria for dollars:
Sell over $30 - 1 point daily
Sell over $100 - 2 points daily
Sell over $150 - 3 points daily
Sell over $300 - 5 points daily
Sell over $500 - 6 points daily
Sell over $1,000 - 7 points daily
Each cell will have a different dollar value in it. I've tried so many different ways to do this IF factor that I have confused myself and spun in circles. Can anyone help me with this? I am about ready to pull out my hair, and really don't want to have to go in and manually do this daily for 30 reps.
I am having a problem getting a number to round correctly in Excel. I know I can use =ROUNDUP(x,x) to get it to the nearest whole number but I also need the rounded number to be a factor of another number like you would use in =MROUND(x,x). The problem is the MROUND function also rounds down. As an example if I have the number 12.5 and I want this to be rounded up by a factor or 4 I would get 16.
See attached file. I am looking for a macro which can copy/paste down a value (column A) by a given factor (column B). The result should be a list of all values (column C). The amount of values and factors is unknown (the attached example ends at row 5).
I have two factors that both change, resulting in two unique values. I'm trying to determine which portion of the resulting delta is attributable to each factor. Example:
Hourly Cost Run Rate Piece Cost (Hourly Cost / Run Rate) $105.00 4,500 $0.0233 $126.10 3,000 $0.0420
I got a list of products and a price list. How to obtain a total for a given subset of products using a formula? Kind of sumif multiplied by a vlookup...
I want to group N elements which is a factor of 7 into groups of 3 randomly. For example, I have 21 elements:
ZSW PMH NYV JTX DEF CRK AOI
I want to group them into 6 more sets. Now, all in all 7 sets. Group them into other sets without the element repeating in the row it has occupied before. For example, for letter P. "P" has occupied row 2 in set 1, it cannot occupy row 2 anymore in other sets. Therefore, each element must have occupied row 1-7 in all the sets.
See attached excel file for the example output : grouping7-final.xlsx‎
Here is a table with values from Factor1 to Factor 5. Underneath that, for a specific index, I can mark Y or N for factor values. For instance, for index 1, Factor1 and 2 is marked as Y. The goal is to calculate total factor based on variable and factor values. In this case, variable value is 6, factor 1 =1 and factor 2=1.25). So Total factor = 6*1.25*1.5 = 11.25. If all factor values are marked as N, then total factor = variable value (Example is for Index 3)
How this can be implemented. I tried using COUNT function to count the total number of Y but that works only if all factors have same values.
I am currently working on a spreadsheet that records data from 11 different locations, with each location having it's own page within the workbook.
All of the pages are identical in terms of how the data is stored, the only difference is literally the name of each page (i.e. the location).
What I would like is to have a master page that then pulls through the relevant data, dependent on which location I choose from a drop down list on this page. As each individual page is identical in terms of lay-out, one formula will work for each page, with the only obvious exception is the page reference embedded in the formula. I know how to do a standard lookup for various figures, but I can't figure out a formula that would work with 11 different options... Is there any way to accomplish this?
Using excel 2010: I am calculating a dollar weighting with one isolation factor, the state where the sale took place. My current formula is below. Each dollar amount in AG3:AG2000 has a corresponding weighting in AB3:AB2000. The results are isolated by the corresponding state in the range E3:E2000.
I want to add in an additional isolation, the month when the sale took place. The months are located in H3:H2000. Where in my current formula would I insert the isolation for the month?
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
My objective is to replace a text string with a numeric variable. The string has text values such as US, Canada, Germany, France etc, There are about 15 such words in total. Each row will have a different one of the 15 text strings.
Each text string has a corresponding number, which I want to use in various formulas throughout the spreadsheet. The numbers are located on a separate worksheet (“Match Rate”), within the same workbook. I obtained the numbers from a formatted report, which I simply pasted into the second worksheet. Due to the complexity of the report, I can’t reformat the numbers to allow use of the VLOOKUP function.
I created the following function, but unfortunately it doesn’t work. Can you help, please?
I’d like to stay with a VBA solution, since a simple if/then sequence such as this is an excellent introduction to the powerful world of VBA... (it just doesn’t work, yet). I suspect the problem is in the calls to the Match Rate Worksheet.
Ok. Here's what I'm trying to do. I have a drop down menu of certain providers located on cell F5. Each one charges different rates per day located on another sheet. Here's the kicker two of those providers charge different rates depending on the amount of days. Those two are UASC and CMA. For the First 5 days they charge one rate and after the 5 days they charge an increased rate.
I'm trying to have one cell located on the first sheet display this information with all the proper calculations. The below formula gives me a false value. I'm not even sure if it works. I know a little bit of excel through some intro courses in college but I'm not sure if a formula like this would work. I know laugh it up.... : ) but I'm not too saavy with formulas....
If pVal = "(MID(A7,8,9)="GIR" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="NL" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="BE" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AT" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="DE" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="PH" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AU" Then LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie! C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
Else LookupRetrieve = "isingcode missing" End If
End Function
The formula is a vlookup formula (Index/Match but with multiple criterias such as the use of Mid).
I tried Concatenate but the formula is too long and has a lot of characters and VBA seems better.
I'm building a macro and need to know how to add a nested if-then statement. I need to create a formula in a new column whose value extends to the last row of the database. My base formula is sumproduct(--((A2:A:last row which I need to calculate&B1:B same thing)=A2&A2))
I am trying to write a formula that will satisfy the following:
C1 and G1 are number values.
IF (cell E1 does not contain any text) AND (G1-C1-12.5>=0), then output (G1-C1-12.5), otherwise output nothing (""). BUT, IF (cell E1 DOES contain text) AND (G1-C1-13>=0), then output (G1-C1-13), otherwise output nothing.
I'm trying to build this formula and I'm only half way through it and it already isn't working. Column D - can be 1, 2, 3, or 4 Column E - can be any number
If column D is 1 or 3, then the VLOOKUP should look up column E and point to the answer in column 4 on another worksheet (Companies in this case). If column D is 2 or 5, then the VLOOKUP should look up column E and point to the answer in column 5 on another worksheet (Companies in this case). This is what I have so far, just trying to get it to recognize if it is a 1 or 2:
I'm hoping someone can help me sort this out. I have a formula I need te determine if a TAT was 'met' or 'missed' and it has multiple criteria. Here is the formula I am trying to get to work:
I've been able to get separate pieces of the formula to work correctly, example: =IF(AND(F2<>"n/a",I2="Amendments",F2<=3,OR(D2<=G2)),"Met",IF(F2="n/a","n/a","Missed"))
but when I try to combine everything into one string I can not get it to work.
I seem to be having trouble creating a nested loop. It seemed simple enough in my brain holder, however, in real life...Well I am here aren't I. Here is my
I am trying to create a nested IF function (has 5 IF statements), however, every time I put the brackets at the end of the function, it puts a little . next to the false answer, removes the brackets and comes up with an error message?
This is only happening on one particular PC, when I create the same formula on other pC's, it works fine so I know my formula is correct.
I am trying to write a function such that the data returned to a given cell will vary depending upon the data entered into another cell. For example: If A1= 105, then G1=20; if A1=106, then G1=15
I have more variables for A1 than 7, so I don't think that nested if...then statements would work. Can I do this using VLOOKUP?
I have a rather large formula that I put together and it's shown in column 'C' in the small sample file I have attached. I'd like to add one more criteria such that I avoid duplicate solutions in column 'C'. i.e. I only want the first occurrence of a group.
The formula works fine 'bucketing' the first entry. If I have an solution in C I want the formula to not give me another answer if the cell immediately above has an answer. In other words, rows 11 and 15 would be blank because rows 10 and 14 have an answer.
I've tried inserting another criteria in the AND statement, like ISBLANK for the cell above, but I can't get it to work. What am I doing wrong, OR is there a simpler solution?
I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.
=IF((OR(B14=1,2,3,12,15,16)),"A",IF(OR(B14=4,5,6,7,8,9,10,11,13,14,21,40,41,42,43,44,45,46,47,50,51, 52,53,54,55,56,59,60),"B",IF(OR(B14=20,30,57,58),"C",IF(OR(B14=33,31,32,34,35,22),"E F OR G",IF(OR(B14=36),G,"ERROR")))))
