Nested, IF, AND, And OR Function
Feb 22, 2009
I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.
View 10 Replies
ADVERTISEMENT
Nov 25, 2008
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
View 6 Replies
View Related
Dec 1, 2005
I am trying to create a nested IF function (has 5 IF statements), however,
every time I put the brackets at the end of the function, it puts a little .
next to the false answer, removes the brackets and comes up with an error
message?
This is only happening on one particular PC, when I create the same formula
on other pC's, it works fine so I know my formula is correct.
is there a setting on the PC that must be wrong?
View 14 Replies
View Related
Jan 23, 2014
This formula seems to work fine for the first two logical tests, but when it come to adding the third, I get an error.
=IF(E5="Hourly",C5*D5,IF(E5="Daily",(C5*D5)*8,IF(E5="Weekly",(C5*D5)*32,''"))
View 4 Replies
View Related
Oct 2, 2009
I am receiving an error using the following string as I am not using the OR request properly.
=IF((+$B7&$C7&$D7&$E7)="","",IF(+D7="",+I6,+D7) OR IF(+D7="(blank)","",+D7))
View 2 Replies
View Related
May 27, 2012
I am struck in using IF /AND in nested function as follows,
A1B1C1D1E1F1G1
1 3 5 7 9 32
=IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),""))
(Above, A1 to >G1 are cell address , in exact rows are actual values)
View 9 Replies
View Related
May 31, 2006
I need to keep track of my salesmen's time. However, the company will not pay for the first 45 minutes so I need a formula that says, if the time entered in under "worked" is less than 45 minutes, no time will be deducted. If the time entered is equal to or greater than 45 minutes, 45 minutes will be deducted. These are the columns needed and the Daily Hours would be the total of all the previous columns. WORKED TRAVELED LUNCH DAILY HOURS
View 2 Replies
View Related
Nov 7, 2012
I am trying to concatenate the text of a few cells in a specific worksheet. I'm not wanting to use the STRING & STRING type code because I already had a Concatenate formula nested with an index formula and needed to have this formula copied to a certain RANGE, Where the RANGE was specified by a Variable. T
he Code below does what I need if the CONCATENATE/INDEX formula is in the cell that im copying already. (BELOW) The Formula in the cell, for example, on row 19 of worksheet "COMMISSION", that needs to be copied and incremented down the VARIABLE RANGE is
=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1)).
VB:
Dim iInput_Rows As Integer
iInput_Rows = Worksheets("Workspace").Range("D3").Value
Dim iOutput_Rows As Integer
iOutput_Rows = Worksheets("Workspace").Range("D1").Value
Dim iAnalog_Rows As Integer
[Code] ....
My problem is when I use the following code to insert that concatenate/index formula, through vba, then I get errors because it evidently doesnt like the " " for the space i needed between texts. (The Formula is concatenating text in those cells but every other Row) Can I do this in VBA?
VB:
Worksheets("COMMISSION").Range("B19 + iOutputs_Rows").Formula = "=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1))"
View 2 Replies
View Related
Oct 27, 2009
I'm writing a spreadsheet where I need to calculate a nested IF function (I think), and I am unsure of how to do it.
The problem is this:
The total $ value of the quote is entered, then depending on two variables, a rebate may be deducted from this total value. The first variable is eligibility (a Y/N response), the second is the type of project - there are two types of project and each attract a different rebate amount.
So I have:
A: total quote $
B: Eligibility - 'Y' or 'N' (if 'Y', then value of 'C' is deducted from 'A'), (if 'N', then no value is deducted from 'A')
C: Type - '1' or '2' (if '1', then 'C' = $1000), (if '2', then 'C' = $1600)
D: final result
View 2 Replies
View Related
Dec 9, 2009
I have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.
I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.
=IF(MATCH($B5,'FY 06'!$B$5:$B$24,0),1,0)
If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.
So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.
View 14 Replies
View Related
Mar 4, 2013
following
i tried formula =IF(F$1
View 3 Replies
View Related
Jun 4, 2013
I amtrying to find a way to nest a formula in the Match function.
How can i make the following formula more dynamic so that I do not specify the colum "AY"?
=MATCH(11,Data!$AY:$AY,0)
The information is contained in column AY labeled "New-Rate" in the data sheet
View 4 Replies
View Related
Feb 10, 2008
i have several days trying to convert a If nested function in a automate macro, the problem is that i have a lot of formulas, and the machine becomes slow, so i have to apply this formula to "column G"
=IF(LEFT(F2;1)="J";"C";IF(LEFT(F2;1)="g";"C";(IF(ISERROR(VLOOKUP(F2;rifs;1;FALSE));"NC";"C"))))
View 9 Replies
View Related
Dec 8, 2009
I receive montly investment performance projections going out monthly for 10 years. I need to show the return annually for each year. I created a SUMIFS formula to sum the percentages between two date ranges (beginning of the year and the end of the year for each year). However, my SUMIFS formula does not take into considersation compounding. How can I modify the SUMIFS formula I created to take into consideration compounding?
I know how to convert monthly percentages to an annual percentage,using the PRODUCT formula =PRODUCT(1+T15,1+U15,1+V15,1+W15,1+X15,1+Y15,1+Z15,1+AA15,1+AB15,1+AC15,1+AD15)-1, whereas T15:AD15 is the monthly percentage gain. Is there a simplier/alternative way that I can incorporate into the SUMIFS formula?
If it is too complicated to utilize a SUMIFS formula, I would like to be able to select a range of cells and have Excel calculate the result vs typing "1+[select the cell]," for each month. It takes me forever and open to input errors. It would be much easier to be able to select a range of cells when creating the formula.
View 3 Replies
View Related
May 14, 2008
I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))
View 2 Replies
View Related
Nov 4, 2008
I want to substitute the following "special" characters for an underscore. i need to do 9 different characters!!! is there another way?
as you are limited to 7!!!
excel 2003!
=INDIRECT("_animal_"&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(C2," ","_"),"/","_"),"-","_"),"&","_"),"~","_"), "(", "_"), ")", "_"), "$", "_"), ":", "_"))
View 9 Replies
View Related
Jan 31, 2008
is there a way to turn the following formula into a function ?
=IF( COUNTA(A1:A7)=SUMPRODUCT((A1:A7<>" ")/COUNTIF(A1:A7,A1:A7&"")),"No Duplicates","Duplicates")
I just have no idea where to start ?
View 4 Replies
View Related
Mar 21, 2008
I had more than 7 nested if statements so I attempted to formulate the named ranged formula. My 2 ranges are as follows: LDD1=IF(MONTH(P1)=MONTH(F2),C5-F5,IF(MONTH(P1)=MONTH(G2),C5-G5,IF(MONTH(P1)=MONTH(H2),C5-H5,IF(MONTH(P1)=MONTH(I2),C5-I5,IF(MONTH(P1)=MONTH(J2),C5-J5,IF(MONTH(P1)-MONTH(K2),C5-K5,IF(MONTH(P1)=MONTH(L2),C5-L5))))))) LDD2=IF(MONTH(P1)=MONTH(L2),C5-L5,IF(MONTH(P1)=MONTH(M2),C5-M5,IF(MONTH(P1)=MONTH(N2),C5-N5,IF(MONTH(P1)=MONTH(O2),C5-O5,IF(MONTH(P1)=MONTH(P2),C5-P5,IF(MONTH(P1)-MONTH(Q2),C5-Q5))))))
Basically what it's doing is comparing the current month with the month in the column heading and calculating appropriately. However, when i input the if statement (=if(LDD1,LDD1,LDD2), i get an error saying that it's an inconsistent formula and the result that it gives is wrong, too. Problem cell is e5
View 2 Replies
View Related
Mar 10, 2014
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
View 3 Replies
View Related
Apr 22, 2008
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies
View Related
Jan 27, 2010
I am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?
=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))
View 2 Replies
View Related
Jan 29, 2009
I have two columns of data. for example:
Column A
1
3
4
0
2
0
0
3
Column B
Product A
Product A
Product B
Product B
Product A
Product A
Product B
Product B
What I need the function to return is:
Product A - 3
Product B - 2
This is what I thought the function should look like but it is not working:
=IF(A6:A50>0,COUNTIF(A6:A50,"Product A"),0)
If Product A or B did not have any values >0, it would return a zero.
View 4 Replies
View Related
Dec 11, 2009
My objective is to replace a text string with a numeric variable. The string has text values such as US, Canada, Germany, France etc, There are about 15 such words in total. Each row will have a different one of the 15 text strings.
Each text string has a corresponding number, which I want to use in various formulas throughout the spreadsheet. The numbers are located on a separate worksheet (“Match Rate”), within the same workbook. I obtained the numbers from a formatted report, which I simply pasted into the second worksheet. Due to the complexity of the report, I can’t reformat the numbers to allow use of the VLOOKUP function.
I created the following function, but unfortunately it doesn’t work. Can you help, please?
I’d like to stay with a VBA solution, since a simple if/then sequence such as this is an excellent introduction to the powerful world of VBA... (it just doesn’t work, yet). I suspect the problem is in the calls to the Match Rate Worksheet.
View 11 Replies
View Related
Jan 17, 2008
Ok. Here's what I'm trying to do. I have a drop down menu of certain providers located on cell F5. Each one charges different rates per day located on another sheet. Here's the kicker two of those providers charge different rates depending on the amount of days. Those two are UASC and CMA. For the First 5 days they charge one rate and after the 5 days they charge an increased rate.
I'm trying to have one cell located on the first sheet display this information with all the proper calculations. The below formula gives me a false value. I'm not even sure if it works. I know a little bit of excel through some intro courses in college but I'm not sure if a formula like this would work. I know laugh it up.... : ) but I'm not too saavy with formulas....
View 9 Replies
View Related
Jul 8, 2008
I have a total of 30 nested formulas that (ofcourse) dont work in excel.
Here is an example of the first 7 nested IFS
(1) IF(MID(A7,8,9)="GIR",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(2) IF(MID(A7,8,9)="NL",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(3) IF(MID(A7,8,9)="BE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(4) IF(MID(A7,8,9)="AT",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(5) IF(MID(A7,8,9)="DE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(6) IF(MID(A7,8,9)="PH",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(7) IF(MID(A7,8,9)="AUBE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
I tried this code but it is not working.
Function LookupRetrieve(pVal As String) As Long
If pVal = "(MID(A7,8,9)="GIR" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="NL" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="BE" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AT" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="DE" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="PH" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AU" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
Else
LookupRetrieve = "isingcode missing"
End If
End Function
The formula is a vlookup formula (Index/Match but with multiple criterias such as the use of Mid).
I tried Concatenate but the formula is too long and has a lot of characters and VBA seems better.
View 9 Replies
View Related
Dec 7, 2009
I'm building a macro and need to know how to add a nested if-then statement. I need to create a formula in a new column whose value extends to the last row of the database. My base formula is sumproduct(--((A2:A:last row which I need to calculate&B1:B same thing)=A2&A2))
View 9 Replies
View Related
Mar 20, 2014
I am trying to make this work. VLOOKUP (B2,"lookup tables'!$A$4:$A$11, if(D2'="ST" 'lookup tables!$C$4:$E$11.
I am attaching the file : MDCC Reservations.xlsx
I am trying to get the Daily room charge.
View 5 Replies
View Related
Jun 30, 2014
I am trying to write a formula that will satisfy the following:
C1 and G1 are number values.
IF (cell E1 does not contain any text) AND (G1-C1-12.5>=0), then output (G1-C1-12.5), otherwise output nothing (""). BUT, IF (cell E1 DOES contain text) AND (G1-C1-13>=0), then output (G1-C1-13), otherwise output nothing.
View 2 Replies
View Related
Nov 7, 2007
Level RatingA RatingB RatingC Low Medium High
2 x x x x x x
3 x x x x x x
4 x x x x x x
5 x x x x x x
I need to be able to do nested loops. I want to have a criteria that if a person is in LEVEL 2 and RATINGC and HIGH, then take the value under that.
View 9 Replies
View Related
Aug 5, 2009
Im needing to achieve what an 11 argument nested if would manage, ie: ...
View 2 Replies
View Related
