I got a 2 columns (A:B) with values in workbook1 (survey2.xlsm)
I want to open a sheet named according to values from column A wb1 in workbook2 (du_database2)
And I want to fill in the offset values (column B) in the aproppriate sheet
I wrote this sub for it. I am having troubles with the for each statements (how do I set them up properly?). The script itself hasn't been checked might also been wrong there.
VB: Sub copytest() 'by J Dim ws As Worksheet Workbooks.Open "survey2.xlsm" Application.Workbooks("du_database2.xlsm").Activate
I am having issues writing the VBA code for IF statements. I am essentially trying to nest IF statements within one another. I have it done through the regular If functions as seen in the attachment, but I cannot seem to get it to work with VBA.
I need it to work in VBA without knowing how many rows of data there are. In the attachment you will see the rules that I need the data follow, but here is an example. Essentially, depending upon how large cell C2 is, I need to add a certain amount of months to whatever is in E2.
To start with, not sure I have the ">0" part correct in the above IF statements. That expression is meant to be asking it: Is the VLOOKUP finding valid data (result #N/A)?
Next, comes the nesting part. If the VLOOKUP isn't finding valid data (result = #N/A), then I want it to move on to the next IF statement.
I have 3 different columns I want it to look at; hence, the 3 IF statements. In the end, if none of the three IF statements results in any valid data, I want it to give the result "Research".
In column A I have the debt name i.e. the company that owes us money. In column B I state the amount owed to us In column C the month by which the income is due. This is selected from a drop down list: M1, M2, M3 etc up to M12 In columns D through O, I have the forecast of what payments will be recieved in months 1-12
In the next cell I want to total payment that will be recieved by the due date. So, if the the cell in Coumn C says M5, then it would just add up the amount forecast in months 1-5, but if the first cell equals M2, then it would add up the forecats for M1 and M2. What formula do I put in here?
e.g. Manually enteres numbers would look like this, but I need a formula for cells in column P
A B C D E F G
[Code] .......
The only way I can think of doing this is with nested IFs but the limit is 7 and I need 12. I have used 12 monhts here for example. In fact on the real version I have 48 months and obviously can;t do 48 nested IFs.
In column G, users select one of three values. I want a list of additional options (my named ranges) to appear in column H based on the selection of column G. I can get this to work when just referring to one of the named ranges, but not all three. I also do not want any of the data to appear if there is no selection in column G.
My not quite right code:IF($G$5="Code of Conduct",COCList,IF($G$5="Integrity",INTList,IF($G$5="Behavior",BEHList,"")))
I'm trying to nest if statements that also include "and" and "isblank" factors. The following formula isn't working, and I'm not sure if it's because of my use of isblank or lack/placement of parentheses.
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
DATE A B C D E 2/22/2008TRUEFALSEFALSEFALSERon 2/23/2008FALSETRUETRUETRUEPhill 2/24/2008FALSETRUEFALSEFALSETracy 2/25/2008FALSEFALSEFALSEFALSESharon 2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
I tried using this array formula but it has an error in it and I can't figure out the error. =SUM(IF(Tracking!$C$2:$C$5000=$B$4,IF((Tracking!$D$2:$D$5000="15-M Eval")+(Tracking!$D$2:$D$5000="15-M TIC")+(Tracking!$D$2:$D$5000="Misd CRT"),IF(Tracking!$E$2:$E$5000=$A6,IF(Tracking!$J$2:$J$5000>=VALUE($B$1),IF(Tracking!$J$2:$J$5000<=V ALUE($B$2),1,0)))))) (I attached the workbook. In the CSTE worksheet, I didn't use control-shift-enter so you could see the formula.)
What I'm trying to do is come up with a formula that will sum if either of these three Legal Status types (15-M Eval, 15-M TIC, and Misd CRT) are present on the Tracking worksheet with a specified Evaluator within a certain date range. The formula works if I just want to find one Legal Status type. I also will want to come up with a formula that will sum if either of these five Legal Status types (15/30-F Eval, 15-F TIC, 1/90 CRT, 2/90 CRT, and 180 CRT) are present on the Tracking worksheet with a specified Evaluator within a certain date range. I tried researching if I could define a name that would sum these 3 Legal Status types but that didn't work either.
I have an array (partArray) that contains a number of parts that I need to get values for. The part array is populated (Thanks Norie!) by bring in the contents of a cell and splitting them into array elements. I then run them through a trim loop to remove the white spaces. Up till here thefunction works fine.
I created a partRSL array to hold the matching value for each part ( I know i can use multidimensional arrays but i dont understand them yet and need to deliver a prototype to get some approval from senior mgmt ).
The idea is that as we run through each element of the partArray we will vlookup the corrseponding value and assign it to the appropriate element of the partRSL. When I use the function below it returns a #value. I think that the element of the partArray i want to lookup is not being used as a string and so the lookup is failing. As a test to see that this is working i have the function returning the value of element 0 in the partRSL array as it is distinct from the rest. (It should be returning a number (integer)
Function FindAlt(option_address) ' Initialise the array Dim partArray() As String Dim partRSL() As String Dim i As Integer
'Populate Array by spliting the comma separated contents of the select cell and assigning each to an array element partArray = Split(option_address, ",")
'This works fine For i = LBound(partArray) To UBound(partArray) partArray(i) = Trim(partArray(i)) Count = Count + 1 Next
I am trying to write a UDF function where I lookup if a value is on a range on different sheet. I would like to be able to write what I want the result to be in the function. I also hard coded that the function need 3 range and 3 results, but I know it is possible the make the number of component vary depending on what the user writes. I would like my function to do that.
Here is what I have written so far :
VB: Function find_para2(var As String, rng As Range, result1 As String, rng2 As Range, result2 As String, rng3 As Range, result3 As String) If WorksheetFunction.IsNA(WorksheetFunction.VLookup(var, rng.Address, 1, False)) = False Then find_para = find_para & result1 & ", "
I need returning a working hyperlink from a vlookup. I have a table with part #'s and hyperlinks. On another tab I want to type in a part number, have it search the table and return the working hyperlink. This will allow the user to just click it and go to that tab.
I have a vlookup for one cell into another sheet however it retruns #n/a(cell A1) the cell adjacent is an if command (Cell B1) it reads if(b1>0,1,0) the only problem is if the cell (A1) will not return zero just #n/a how can I turn the #n/a into a zero? so cell A1 will return a zero and not #n/a
I have a list of cells and for each of them I preform VLOOKUP in a certain table.
Now, I want to sum the values all the VLOOKUPs without viewing the results of each VLOOKUP. In other words, I don't want a cell for each VLOOKUP result. I am only interested in their sum.
I want to vlookup one value into two different tables and return the 2nd column in the respective table it finds the value in. if it does not find the value in either table, return "". Currently I have the formula below, but it is not working 100%.
Any recommendations on vlookups being able to recognize a value that does exist within a table? It returns an N/A and the formatting is the same for both references.
I am having trouble using an if statement with a vlookup.
The first calculation i am trying to do is calculate the cost of storage for the product, each product (3 of them) has it's own charging matrix which i have turned into a table on another sheet and therefore want to use the vlookup to return the correct values (meaning that i can change the underlying table and not have to change the formula each time a price change occurs), the sheet calculates the dwell time between entering and leaving, if dwell time is less than 7 days the charge is the number of days * products <7 days rate, if it is >7days then the charge is 7 days at the products lower rate and then the balance at the higher rate. I have a formula that is a longwinded way of calculating it for one size only but would like to add vloopup so that dependent on the units size the storage is calculated.
I have attached a sheet as an example, you will see the data table is quite large and as we consume extra services i plan to use a tick box to indicate use and then add this to a running subtotal again through an if and vlookup.
I am trying to create a formula with mutiple criterias to come back with results of whether that person is Eligible or Not Eligible for stock. The criteria to be Eligible is as follows:
1) Hire Date before 1st March 2007
2) Band 1 and the performance review = Exceeded
3) If Band 2-5 then performance review must be either Achieved or Exceeded
See attached file for the example. I have got as far as the first 2 points but i am struggling with incorporating the last point.
I am trying to write a formula that will give more than 1 return for a vlookup statement. The info i am looking up is sku code (col a) and expiry date (col b). There are more than one entry for some skus , but I am only getting returned the first expiry date.
I am trying to create an asset management database using excel, and would like to be able to add custom notes to each entry (index) so as time goes on, I can refresh my memory what we have done with a particular item. I have attached the current file I have created.
Essentially, when I use the GREEN drop down menu in the top right, I want it to display the notes/comments that I enter in the rightmost column of the data, as the attached file illustrates.
However, I want to be able to hide that rightmost column and be able to edit the data from the new area (white space) it is being displayed in, however as I have it set up right now, if I edit the cell, it edits the forumla and poof goes all the comments and the formula becomes messed up.
I had the first and third argument working properly but am running into difficulty when I tried to enter the middle formula.
If A1 + B1 = 0 then "0" OR
If A1 = 0 AND B1 is greater than 0 then give B1's value times .01 If neither of those are true Then A1 minus B1, divide the result by A1 and then multiply it by negative 1.
=IF((A1+B1=0),("0%")*OR,IF((A1=0 and B1>0),(B1*0.01),((A1-B1)/AI*-1)))
I've followed several tips on how to match these formulas, but somehow cannot make them work. I'm using Open office's version of excel. I need a formula that searches on 'tension downfall' for data in the first sheet, and then return a value corresponding to the row and column that match the input on the first sheet.
'tension downfall' shows a double entry table which shows amperage against length and returns a wire size. I would like to input amperage and length on two different cells and have the wire size needed for those values. Is it clear enough? I'm attaching my current work to make it a little bit clearer.
