I am having issues writing the VBA code for IF statements. I am essentially trying to nest IF statements within one another. I have it done through the regular If functions as seen in the attachment, but I cannot seem to get it to work with VBA.
I need it to work in VBA without knowing how many rows of data there are. In the attachment you will see the rules that I need the data follow, but here is an example. Essentially, depending upon how large cell C2 is, I need to add a certain amount of months to whatever is in E2.
I got a 2 columns (A:B) with values in workbook1 (survey2.xlsm)
I want to open a sheet named according to values from column A wb1 in workbook2 (du_database2)
And I want to fill in the offset values (column B) in the aproppriate sheet
I wrote this sub for it. I am having troubles with the for each statements (how do I set them up properly?). The script itself hasn't been checked might also been wrong there.
VB: Sub copytest() 'by J Dim ws As Worksheet Workbooks.Open "survey2.xlsm" Application.Workbooks("du_database2.xlsm").Activate
In column A I have the debt name i.e. the company that owes us money. In column B I state the amount owed to us In column C the month by which the income is due. This is selected from a drop down list: M1, M2, M3 etc up to M12 In columns D through O, I have the forecast of what payments will be recieved in months 1-12
In the next cell I want to total payment that will be recieved by the due date. So, if the the cell in Coumn C says M5, then it would just add up the amount forecast in months 1-5, but if the first cell equals M2, then it would add up the forecats for M1 and M2. What formula do I put in here?
e.g. Manually enteres numbers would look like this, but I need a formula for cells in column P
A B C D E F G
[Code] .......
The only way I can think of doing this is with nested IFs but the limit is 7 and I need 12. I have used 12 monhts here for example. In fact on the real version I have 48 months and obviously can;t do 48 nested IFs.
In column G, users select one of three values. I want a list of additional options (my named ranges) to appear in column H based on the selection of column G. I can get this to work when just referring to one of the named ranges, but not all three. I also do not want any of the data to appear if there is no selection in column G.
My not quite right code:IF($G$5="Code of Conduct",COCList,IF($G$5="Integrity",INTList,IF($G$5="Behavior",BEHList,"")))
I'm trying to nest if statements that also include "and" and "isblank" factors. The following formula isn't working, and I'm not sure if it's because of my use of isblank or lack/placement of parentheses.
I have attached a sample work sheet that has the directions and a sample.
I want to use vlookup (or any relevant formula) to find a value in a table if it falls between two dates. The sample worksheet does a lot better job explaining this.
For instance, if I want to find 3/1/15, it is between 2/1/15 and 4/1/15, so I want the dollar amount to be $8.75
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
DATE A B C D E 2/22/2008TRUEFALSEFALSEFALSERon 2/23/2008FALSETRUETRUETRUEPhill 2/24/2008FALSETRUEFALSEFALSETracy 2/25/2008FALSEFALSEFALSEFALSESharon 2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
I tried using this array formula but it has an error in it and I can't figure out the error. =SUM(IF(Tracking!$C$2:$C$5000=$B$4,IF((Tracking!$D$2:$D$5000="15-M Eval")+(Tracking!$D$2:$D$5000="15-M TIC")+(Tracking!$D$2:$D$5000="Misd CRT"),IF(Tracking!$E$2:$E$5000=$A6,IF(Tracking!$J$2:$J$5000>=VALUE($B$1),IF(Tracking!$J$2:$J$5000<=V ALUE($B$2),1,0)))))) (I attached the workbook. In the CSTE worksheet, I didn't use control-shift-enter so you could see the formula.)
What I'm trying to do is come up with a formula that will sum if either of these three Legal Status types (15-M Eval, 15-M TIC, and Misd CRT) are present on the Tracking worksheet with a specified Evaluator within a certain date range. The formula works if I just want to find one Legal Status type. I also will want to come up with a formula that will sum if either of these five Legal Status types (15/30-F Eval, 15-F TIC, 1/90 CRT, 2/90 CRT, and 180 CRT) are present on the Tracking worksheet with a specified Evaluator within a certain date range. I tried researching if I could define a name that would sum these 3 Legal Status types but that didn't work either.
I am trying to create a formula with mutiple criterias to come back with results of whether that person is Eligible or Not Eligible for stock. The criteria to be Eligible is as follows:
1) Hire Date before 1st March 2007
2) Band 1 and the performance review = Exceeded
3) If Band 2-5 then performance review must be either Achieved or Exceeded
See attached file for the example. I have got as far as the first 2 points but i am struggling with incorporating the last point.
I had the first and third argument working properly but am running into difficulty when I tried to enter the middle formula.
If A1 + B1 = 0 then "0" OR
If A1 = 0 AND B1 is greater than 0 then give B1's value times .01 If neither of those are true Then A1 minus B1, divide the result by A1 and then multiply it by negative 1.
=IF((A1+B1=0),("0%")*OR,IF((A1=0 and B1>0),(B1*0.01),((A1-B1)/AI*-1)))
I've followed several tips on how to match these formulas, but somehow cannot make them work. I'm using Open office's version of excel. I need a formula that searches on 'tension downfall' for data in the first sheet, and then return a value corresponding to the row and column that match the input on the first sheet.
'tension downfall' shows a double entry table which shows amperage against length and returns a wire size. I would like to input amperage and length on two different cells and have the wire size needed for those values. Is it clear enough? I'm attaching my current work to make it a little bit clearer.
I have a new job a part of which is where I have to provide reports using data from excel 2003 sheets that are sent to me by someone else. I add my own formulas to get the data I need. One such bit of data is. How many rows have "yes" in col E and "w" in range M:V?
I'm building a model that based on the start date (cell C7) needs to display the month of the project (M1, M2, M3, M4, ... M12) under the appropriate calendar month (Dec-07, Jan-08, etc.). The formula below works great (E4 is the calendar month Dec-07 in this case, and when I drag the formula horizontally it updates (F4, G4, etc.). B33 through B44 are my month references M1, M2, M3, etc.)
Here's the problem: The below statement contains seven nested ifs and Excel won't let me add additional if statements. How else can this be accomplished?
I am trying to use a formula with 13 nested IFs in Excel 2007, which is supposed to allow up to 64 nestings. But I get a message that the formula "uses more levels of nesting than are allowed in the current format" whether I am using xlsx, xlsm or xlsb.
I want to accomplish a few things in one cell. The basics are this:
I want to pull the lowest numbers from a given sample. The sample needs to have a time component (10 lowest out of the most recent 20 results). Those numbers are to be averaged. That average is to be multiplied by .96, then that final yield needs to be truncated to 1 decimal.
Now, I'm not sure this is possible or not. But, if it is, I want to also select the amount of numbers I pull from the sample to average to be based on the sample size itself. For example, if there are 10 results in the sample size, I only want to average the lowest 3 of the 10.
Is it possible to formulate all of these rules into one cell?
I need a formula that will determine if a line is active or expired by first looking at the category and then looking at the number of days. (While still incorporating the ISBLANK section of the current formula.)
For Example: If the category is either FWW or FWW Ext then the line will expire after 365 days. If not, then it will expire after 180 days.
I am currently using the STDEV formula. Is there a way, that i can make the formula use data from nonblank cells, only. For example: A1, A2, A5 will have numbers listed. A3 & A4 are blank. Can i get the formula to use only A1, A2, & A5?
