i was recently upgraded to Excel 2003 and have found that whenever i open more than one workbook, it opens in a new window on the taskbar (similar to opening another application)... I remember having this in my previous version of excel but i can't for the life of me remember how i switched this off?
View 9 Replies
I'm working on an Excel workbook that is opened by a batch file, updates information, copy and pastes that information to PowerPoint, and closes itself after spending two minutes idle. This is all for an employee communication monitor that runs 24/7. However, I don't like that the Excel spreadsheet displays on the monitors for two minutes every time it opens and runs.
Right now I was using the bit of code below to minimize the workbook when it was done copying and pasting the information. It works fine for the monitors, but the application is not visible in the Taskbar.
Sub Workbook_Open()
...
Application.Visible = False
End Sub
Is there anyway to minimize the workbook while keeping the window visible in the taskbar?
I found this code on the web for hiding the windows taskbar.
View 14 Replies View RelatedWhen I open more than one Excel file, it used to display them as separate icons on my task bar. But for some reason, now I only get one one icon, and I have to go to Windows on the Menu Bar to switch between them. I can't use Alt/Tab anymore. It only affects Excel.
View 4 Replies View RelatedI was wondering if this code is supposed to make the icon on the taskbar change to the custom icon as well?
If not, what would need to be added or changed to make it so?
It changes the Userform Icon without issue and adds the userform to the taskbar, but it is not updating the icon on the taskbar.
I have a workbook which will open another workbook on a server, but i see it on the open and close on the task bar. Because I have 4 pc's with the main workbook open as single applications and one book on the server which collects info everytime a button is pressed, I would like it not to show on the on the task bar, needs to be invisable, is there any way of this?
Also
Can i see if a workbook is open, regardless of which PC (out of 4), which may not be the one i am using. So a way to see if a workbook is open anywhere else?
I have developed an Excel 2003 program that hides Excel through Application.Visible = False. All that shows are the series of about 10 forms that the user utilizes to add, change, update and report on information. However, I want to be able to show these forms in the taskbar when they are activated, and remove them when they are exited. I know WHERE in the code to put this, but can't find the right control to activate. I know VB6 has the "Show in Taskbar" property; does Excel have something similar?
View 7 Replies View RelatedI have my Windows settings set up so that each file that I have open in Excel appear separately in my taskbar at the bottom of the screen. So for example, if I have 2 Excel files open, Excel appears in my taskbar twice instead of being grouped together.
I like to use this set up so that I know which file to click on when I'm working between multiple files. The problem is that on occasion, they will get out of order.
So let's say I have file A on the left and file B on the right. Then I save file A. After saving file A, now file B appears on the left and file A appears on the right. This also sometimes happens if I open a 3rd file.
Why does this happen and is there any way to prevent it?
In Excel 2003 multiple Excel workbooks were separate tabs in the Task Bar.
Very easy to tab between open workbooks, with the keyboard -OR- minimum mouse travel to select an alternative tab/workbook.
In Excel 2010 there is only one tab for "Excel", and the only way I can find to toggle between workbooks is the "File" ribbon tab and the oceanic flourishes of "lists" and mouse travel and clicks ... to activate another open workbook. And guessing at file names because the left hand strip, "Recent Files", is way to narrow for even a modest file name.
Is there a setting/shortcut-keys that makes tabbing between workbooks more 21st century "time" efficient ?
I recon, IF Excel is hidden than Windows doesnt see it with ALT Tabs as program and doesnt put it as program in the taskbar.
Is it possible to set a form active as a program? While hide Excel?
I used to be able to see on the bottom bar that there are several Excel files that are opened. There would be a small black triangle next to the Excel button below. But now I need to do click the 'Window' button above to pull down the menu to access to other Excel files that are opened. This problem is only with Excel but not Word or Powerpoint? Is there a setting I must do in Excel? Auto Merged Post Until 24 Hrs Passes;
View 2 Replies View RelatedExcel will hang up as if it's gone into a continuous loop (Although no looping macros are active) when you open or close a user form. The task bar in Excel will flash Ready Calculate. Visual basic reports no code is running but excel either crashes or becomes very unresponsive. I have to exit and reopen excel in order to fix the problem . It also doesn't happen at any one specific point it can vary. I have various VLOOKUPs around the workbook and userforms display the correct information. I use the INDEX formula in the control source of textboxes. I also use the offset formula to make sure DTPICKER displays correctly.
I am using 'Option Explicit' at the start of all my code. I have tried a 3rd party code cleaner. No visual Basic references are MISSING
[URL]
I'm trying to make my Excel/VBA application look as little like Excel as I can and there's now almost no trace of Excel - so is there any way I can replace the standard Excel green "X" icon that appears on Windows Taskbar with my own?
View 6 Replies View RelatedI have a certain macro which copies data from one file to the other. There are several target files (refering to a given month each) and one source file. The user chooses a month from a drop down list in the source file which modifies a certain cell. The value of this cell decides on which of the 12 target files will be opened to paste the data to. The macro also copies the value of a cell which refers to the current date (=TODAY()) This number is then compared with a the range (value between two pints in time: start and end date of a given month). All I need is some sort of a pop-up window with a header i.e. WARNING. and the window text: You are about to send the information to a file which does not refere to the current month, are you sure you want to perform this action" and two buttons YES and NO in case the value of the current date does not match the range set up by the starting and ending of a given month in the target file. The button YES would then do waht ever the code that was placed before the pop-up window said, save the aplication and close it, and the NO button would simply close the aplicatiown without saving it. Something like that:
Sub Export()
'the whole code describing the action to be taken
If Range("A1").Value >= Range("A3").Value And Range("A1").Value <= Range("A2").Value Then
'here the A1 cell refers to the current date and cells A2 and A3 to the start and the end date of the month
End Sub
i have a macro that performs the same search in many websites, opening a new ie window for any site. What i want now is opening a new tab in IE instead of a new window. To illustrate, here go some code:
VB:
Dim PartNo As String 'Declaro la cadena de texto que determina la busqueda
Public Sub BuscarPLCCenter()
Dim IE As InternetExplorer
[Code]....
I would like that all of these procedures opened a new IE tab to do the search, cause actually it opens like 15 windows at a time and is not user friendly enough.
I am using Excel 2003 and wish to make a tip message (pop-up like window perhaps) if a value of a particular cell is exceeded.
View 2 Replies View RelatedIs there any way to have a macro, that is started from the immediate window, close the immediate window when it's done. My macro closes the immediate window, but as soon as it ends, the immediate window reopens and my cursor is inside it.
View 14 Replies View RelatedThere is a column with a formula and a list validation, and an adjacent hidden column with numbered ids. When moving into the list validation cell the Worksheet_Selection_Change event code saves information about the Target cell - value, address, formula. When a value has been obtained from the list the Worksheet_Change event code looks up a belonging id in a lookup table and put this in the hidden id cell, and puts the saved formula back into the list validation cell. This makes the sheet (or window) unmanagable.
When I move around the sheet I can see the cell name in the Name Box, but the sheet itself is not visible. The only way to display the sheet is to add a new window (Window - New Window), choose the first "frozen" window (Window - 1. window) and quit this window. Then the new window is ready for use, but of course with the same limitations as the newly quitted one. Ring a bell, someone?? The funny thing is that in this workbook I also use the same functionality in another sheet without any problems.
I'm looking for a way to use VBA to set the window size upon opening the workbook. When the document opens, there should be two windows, each taking up half the screen and each on a particular tab.
Currently, if I save the workbook with the window settings I want, when I open it, both windows are maximized. When I hit the restore button, they go back the settings with which they were saved, which is what I want it to look like as soon as it's opened. Also, a bonus would be for the code to determine the screen size, so it can fill the screen no matter what monitor/computer it's opened on.
I have 3 worksheets in a workbook. How can I have the view go to A2 and View that on each worksheet? I do a Range("A2").Select But, it still shows the window on another column - row.
View 2 Replies View RelatedI open up Excel by double clicking on a file, it opens but it just has a grey background and the file I opened is displayed as a small 1 inch stip in the top left - just a title bar with the windows maximise, minimise and close buttons.
What ever I click I can't see any of the cells!
I've built a macro to run a loop that opens excel files, prints certain sheets and closes them. I have the macro working - to some degree. here is my code (this is excel):
Sub RMPProducer()
OldPath = "S:RMBS_Performance_Analytics Analysis1 Staging Folder For Monthly Model Templates2007200704VVDeals"
Dim t As Workbook
Dim s As String
Dim a As Window
With Application.FileSearch
.NewSearch
.LookIn = OldPath
.SearchSubFolders = False
.Filename = "*.xls"
.MatchTextExactly = True
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
s = .FoundFiles(i)
I have 2 problems. First problem is that I am trying to add a function to make the window close once its finished printing. This actually works - but it limits my loop iterations from i = 1 to 2 (so it only runs 2 times and I'm not exactly sure why). If I don't include the statement - this can run for up to 7 - 8 times (these are very large files) then excel runs out of memory. Unfortunately, i can't set the loop to run from i = anything other than one.
So What I would prefer is to be able to make the "ActiveWindow.close" command work - because this way I can run the entire loop. But I'm not sure how to. I tried window referencing, I tried adding a new active Window so when the file opens, its opening in the active window already, but nothing works.
Preferably, I need to be able to reference both windows, as my next macro will involve referencing 2 windows (one static - always open) and the other the loop above.
Heres a strange thing, My latest version of a spreadsheet i have design has got a small problem. When clicking on a cell, nothing appears in the edit window, and when you double click on the cell to edit the contents the data disappears.
This only happens on one sheet within a workbook of 7 pages. The werid thing is that it does not happen on the version before
Any ideas how this could of happened and is there a fix?
Is it possible to create a popup window that contains drawing objects?
I created a "form" with the objects, but I don't know how to use the form.
I want to have this image, or form, or whatever it is, to popup when the user clicks a cell. Is this possible without getting into programming?
Can it be hidden and then made visible when the cell is selected?
I have a workbook open. When I try to open a separate workbook, it opens already opened workbook (basically linking the workbooks as one). I want to have my workbooks on two separate screens this is preventing that. How to unlink these workbooks.
View 1 Replies View RelatedI'm trying to find an ID from a new open Internet Explorer Window.
I know that the ID that I'm trying to search for is "rBeginMonth_BeginDate", but my code always says that it's empty.
The code below is partially of what I've done.
[Code] .....
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window.
So when user closes this excel window there is no problem with other workbook ribbon, as there are open in different window
I have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
A macro, which would allow me to click on a particular cell, which will have an ID number (1 through 34), each ID# is attributed to a particular employee. These ID# are located in my spreadsheet in columns B & G, and the ID #'s begin initially in B6 & G6 and continue downward to B34 & G34. These ID #'s are used in a vlookup type formula which covers 35 pages of this workbook. What I'd like to do is be able to click on any cell between B6& B34 (and/or the same in G6&G34), which has a particular ID # in it and have the photo of that particular employee designated with that ID# pop up in a window generated by the macro. I hope this makes sense! Any help would be greatly appreciated. My 1st sheet in my workbook is my "lookup" tab, which contains my ID# list and numbering sequence affiliated to each employee. So I'm not sure if I'd need to put the photograph of the employee in a column next to the employees name or have a folder designated with all my pictures in a certain directory, etc.
View 11 Replies View RelatedI am looking for an event that would capture the minimization of the Excel application window so that I can force it to stay maximized.
View 13 Replies View RelatedI want to create a floating window in excel that can contain a series of macro buttons (12 total)
I'd like to see if this window can be opened with a hyperlink or a single macro button on a spread sheet.
