I'm trying to find an ID from a new open Internet Explorer Window.
I know that the ID that I'm trying to search for is "rBeginMonth_BeginDate", but my code always says that it's empty.
The code below is partially of what I've done.
[Code] .....
I have a spread sheet that I have written that has 2 html links in it. The links work, but they only open in one browser tab. How do I get them to open in different tabs? Opening in two different browser sessions would be acceptable too. I have Excel 2007 and IE 9 but the users may have different versions.
View 7 Replies View RelatedI compared data between excel worksheets all the time, well recently my computer was upgraded from Windows XP to Windows 7 and since then I have not been able to figure out how to have an Excel file to open in the Excel window selected(or last active window) when I have more than one workbook open. Is there a way to do this?
View 5 Replies View RelatedWhat's the code for opening a Windows Explorer window from within an Excel Macro?
View 7 Replies View RelatedI have this module that is supposed to delete rows containing some words and those that are entirely empty..
The macro works fine when I open the file for the first time (excel as well) but subsequently if i try to run it again, the macro doesnt work anymore. What could possibly be causing this bug?
Private Sub DeleteRows()
ScreenUpdating = True
Dim Rng1 As Range
Dim X As String
X = " TOTAL"
Do
Set Rng1 = ActiveSheet.UsedRange. Find(X)
If Rng1 Is Nothing Then
Exit Do
Else
Rows(Rng1.Row).Delete
End If
Loop............
I have a workbook open. When I try to open a separate workbook, it opens already opened workbook (basically linking the workbooks as one). I want to have my workbooks on two separate screens this is preventing that. How to unlink these workbooks.
View 1 Replies View RelatedThis code takes all the data from a listbox and throws it into a sheet so that I can print it. I would like the print window to open ready to print this one sheet but allow the user to make sure the right network printer is selected before hitting print.
Code:
Private Sub cmdPrint_Click()
Dim i As Long
Dim ws As Worksheet
If Me.lstPrintRooms.ListCount = 0 Then
MsgBox "The are no rooms in the list to print"
[Code] .........
Is it possible for excel to check that a particular window is open and if it is then carry on with a macro
View 9 Replies View RelatedIs there a way that I can make an excel sheet and save it in a way that when it's opened the person JUST sees the cells in a really simple window...
Not sure if I'm confusing people in how I explain this... but basically I don't want it to show the scroll bars, the A B C D etc and 1 2 3 4 etc, the tool bars... etc. JUST the specified cells in a sheet.
So, I've been trying to work out a distribution list. So far, my research has shown me how to code to be able to send a message through outlook by typing content into a spreadsheet, but I'm trying to find code that will simply open a new message window in outlook. I don't want to send it through excel as I've found to be possible b/c outlook is asking for permission to send to each recipient on the mailing list and we have a fairly large staff here, so clicking that button 20 times to allow the email to go through is more labor intensive than just verifying who's on the distribution list and sending.
View 3 Replies View RelatedSay im in sheet 1 at B2. Am looking to create a button so when I press it a small window opens and displays the data that is it sheet 2 (which is just 2 columns of a list of products and price.
Then I for example double click on a product and it will be added in the current cell.
I am trying to get the caption that is displayed on each window of all the open workbooks. I am using the code below to loop through all the workbook windows, get their handles and finally display their respective captions on a Msgbox.I am having 2 problems:
1- The code loops only once instead of once for each open workbook !
2- The Msgbox displays an empty string instead of the workbook caption !
If I am not mistaken, problem 2 is due to the fact that the Class name"EXCEL7" used in the code refers to a worksheet and not to a workbook. The trouble is I can't figure out what a Workbook Class name is so that I can use it in the FindWindowEx Function
Code:
Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long[code]......
I am trying to get the caption that is displayed on each window of all the open workbooks. I am using the code below to loop through all the workbook windows, get their handles and finally display their respective captions on a Msgbox.
I am having 2 problems:
1- The code loops only once instead of once for each open workbook !
2- The Msgbox displays an empty string instead of the workbook caption !
If I am not mistaken, problem 2 is due to the fact that the Class name"EXCEL7" used in the code refers to a worksheet and not to a workbook. The trouble is I can't figure out what a Workbook Class name is so that I can use it in the FindWindowEx Function
Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long
Private Declare Function GetWindowText Lib "user32" Alias "GetWindowTextA" _
(ByVal hwnd As Long, ByVal lpString As String, ByVal cch As Long) As Long
Private Sub CommandButton1_Click()
**Dim BookNameLenghth As Long
**Dim strBuffer As String
**Dim bBufferSize As Long
**Dim lParent As Long
**Dim lChild As Long
In VBA, how do open 2 new windows, and allow for the fact the file name will change (or name the new windows the current file name)? My current file name is "Metal.xls"
Here is what the code looks like now:
Windows("Metal.xls:2").Activate
Windows("Metal.xls:1").Activate
I have a userform with several buttons on, each doing seperate tasks, three of the buttons however are used to load a workbook stored elsewhere in our central data storage drive. Loading these workbooks is not the problem, the problem is when loading these they load up behind the userform and not in a new window.
View 6 Replies View RelatedI'm using this code below sucessfully to open a specific folder view window. What i'm looking for is a way to amend it slightly so that when the window opens the 'folder tree' on the left hand side does not show, as it always does at the moment.
View 2 Replies View RelatedThe below code opens up the printpreview window. This does not allow to select the correct (or change) printer it will automatic use the default printer.
Is there a way for the code to open the print window so I can change the printer and select number of copies?
Code:
Sub Print_Button()
Dim ws As Worksheet, cell As Range
Set ws = Sheets("main")
Set cell = Range("g2000").End(xlUp)
Do Until cell.Value ""
Set cell = cell.Offset(-1, 0)
Loop
ws.PageSetup.PrintArea = ("A2:" & cell.Address)
ws.PrintPreview
End Sub
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window.
So when user closes this excel window there is no problem with other workbook ribbon, as there are open in different window
I have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
Recently my friend forced Excel to close through Task Manager by Ending the Proccess... Since he did that, every .xls(x) file do not opens. No errors. Just Excel Icon on taskbar appears.... as it is minimized... But it doesn't minized.. Either this icon on a taskbar is minimized Excel icon, or this just an icon ....
RepairedReinstalleUpdated
No result ...
I am very new to programming in excel, so bear with me. I need to have a window that pops up when you load excel. I need it to say something like
If A2 > A1, then the popup should say "value exceeded in row 1"
If B2 > B1, then the popup should say "value exceeded in row 2"
If both of the statements above are true, then I would like both of the errors to be in the same window/popup, instead of two seperate ones. I hope thats clear.
I am in a middle of creating macro that makes some calculations in a file downloaded from SAP.
This Macro is in a form of a userform with 8 optionBoxes more then10 Option Buttons then after clicking on a specific button a certain action is being performed it looks like this:
Capture.JPG - PicShot.pl
The code is in one file and I would like the macro operations to be performed on data that are in separate file.
Both are open while perforing macro action, and sometimes I'm getting a stop because macro is being performed in a file with code.
Referencing it with something like:
Windows(FN).activate where FN is defined as the name of a file that is being prepared by "Prepare Template" button.
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window
i have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
I'm working on an Excel workbook that is opened by a batch file, updates information, copy and pastes that information to PowerPoint, and closes itself after spending two minutes idle. This is all for an employee communication monitor that runs 24/7. However, I don't like that the Excel spreadsheet displays on the monitors for two minutes every time it opens and runs.
Right now I was using the bit of code below to minimize the workbook when it was done copying and pasting the information. It works fine for the monitors, but the application is not visible in the Taskbar.
Sub Workbook_Open()
...
Application.Visible = False
End Sub
Is there anyway to minimize the workbook while keeping the window visible in the taskbar?
How to use an Excel worksheet I have, so I decided to make a button with a macro, which when clicked a kind of message box pops up and you can read the tutorial. When you are done you just press ok and the pop up window closes.
I know about vba I just have to use msgbox, keep on adding lines with the text and that's it! But after many attempts I found out that it ain't that easy.
[Code] ......
So I made something like this:
[Code] ....
but at a point I got this error: "Too many lines continuations".
I wanna make something that looks a bit like this: p69pxC8.jpg
But way simpler, with my text, a scroll bar to roll up and down to read and an ok button at the end. I don't need special text with hyperlinks or anything at all, plain text does the job.
It just now crossed my mind, would it be viable to also add a "Print" button next to the "Ok" button in the pop up windows with the tutorial, so when the "Print" button is clicked, the tutorial is printed?
My set up office 2007 win xp pro ie 8 I am using the code below to retrieve web pages etc it works fine, however it display in differ areas of the screen, so I was wondering if there is a way to control the positioning and the size of the window?
Code:
Set EXP = CreateObject("InternetExplorer.application")
EXP.Visible = True
EXP.Navigate (aurl)
[Code]....
We are running Office 2010 part of Office Professional Plus 1010 (corporate install). We have added both the Analysis Toolpak and Analysis Toolpak - VBA to the add-Ins and have the button on the toolbar, however when we click on the button, we don't get the popup window allowing the user to pick the analysis tool they want to use. Have tried this on a number of PCs (we all run the same version) and it doesn't work on any of them.
What we have to do do make this toolpak work?
Alright, so I have Excel itself maximized but the window containing the cells doesn't fill the space that it should... if this makes sense, its like the cells have become a subwindow or something ...
View 1 Replies View RelatedI have tried to define an alternative start-up folder (my goal is to have a PUBLIC.XLSB to store Macros every one can use)
BUT: When I do this, Excel does not start with any open workbook anymore. It starts with a blue background, and need to click "New" first for a workbook to open and work in.
How do I avoid this? One solution that would work, but requires the user to have Macros activated, is to add a workbook during the opening of Excel, but I would like to avoid this.
I am using Excel2010.
My sheet displays values collected from a database via an AddIn. The values are updated by pressing CTRL+G (AddIn function).
I have an OnTime macro running SendKeys "^G" to update the values every minute. When the values exceed a certain limit, a sound is played from a custom Alarm function.
This all works as long as the excel window is active.
But if excel is minimized or another window is opened, the values stop updating until Excel is active again.
When the values dont update the sound is not played and that defeats the purpose of the sheet.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....