Number Format Based On Corresponding Cells Text
May 15, 2008
Cell L90 to L120 are input cells where I type " Percentage" or "Dollar Amount". I need the five cells to the right of each input cell starting two cells over, to be formatted accordingly. I read a thread similar to what I'm asking for suggesting a worksheet change macro, but I can't quite figure it out for a range of cells. Also, in case I need to add a row to my sheet before all of these cells, how can I make sure that this will still work without having to go into the code. Is this an activecell thing?
View 5 Replies
ADVERTISEMENT
Mar 19, 2014
Text to Number or General.xlsx
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
View 9 Replies
View Related
Oct 21, 2007
If Cell A1 in my spreadsheet is 1, then cell A2 should appear formatted as a percentage. So if a user enters 9000 into cell A2, it should appear as 9000%. If Cell A1 in my spreadsheet is 2, then cell A2 should appear as a comma-formatted whole number. So if a user enters 9000 into cell A2, it should appear as 9,000. Conditional formatting doesn't appear to let me do this.
View 5 Replies
View Related
Jul 29, 2013
I have been trying to format the rows on this sheet to color scale red based on the number of repeat text strings in Column E. Referring to the attached example sheet, '321/312.2/321.3' appears the most times and the goal is to color code the rows it appears in the deepest shade of red, then the next highest occurring string would shade the rows it appears in a lighter shade, etc, in descending order. Our team currently does this across multiple sheets manually everyday and it would be a real time saver if we could get excel to do this automatically.
View 14 Replies
View Related
May 4, 2014
I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
View 3 Replies
View Related
May 14, 2014
I have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
View 5 Replies
View Related
Jan 25, 2013
I am wondering if I could have a formula be used against a certain row/cell containing a certain "phrase" or "number" for instance
I want E1 to read something like this = (row containing item "FF32105") (the given row from the previous statement) ( the input column ex. B) (the input value ex. *6)
Essential I want to be able to copy and past a sales forecast and have the formulas automatically (listed below the pasted forecast) calculate purchase needs. The issue is that if our forecast one month has a certain item and then the next does not then they will end up on different lines after the copy/paste. We have over 500 items so a manual adjustment would be time consuming..
Is there a possible way for the formulas to "find" the correct line to start calculating data?
View 6 Replies
View Related
Mar 1, 2007
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
View 14 Replies
View Related
Oct 11, 2012
I want to convert number format to text format, any formula ?
View 6 Replies
View Related
Sep 14, 2007
I'll get straight to the point: How can I change this text format from 474556788 to 0-47455678-8 (dash added after 0 and before the last number). I need to apply this to around 5000 rows (can't do that manualy). I want it to be int his format:
474556788 to 047-455678-8
Tks Auto Merged Post;474556788 to 047-455678-8 (This is the wanted format)
View 10 Replies
View Related
Oct 23, 2011
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
View 4 Replies
View Related
Jan 11, 2007
I used to get data from a database (CorVu & MIMS) in this format "0122458/001". Due to changes in those Databases I now get the data as 2 columns " 0122458" and "1" .What I need to do is somehow get this back to the old format including the leading zeros.
View 8 Replies
View Related
Sep 24, 2008
I can't seem to make user-defined format that puts a text in front of a number and/or a text.
Let's say I have A1: 13, A2: texttext A3: text7 and I want to format a lot of cells to "Ilike 13" / "Ilike texttext" / "Ilike text7"... ie add the same text in the front of the cell, no matter what the content is.
I did manage it seperately, with "texttext" @ for text and "texttext" # for numbers, but what's the general one?
View 12 Replies
View Related
Aug 9, 2007
I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
View 4 Replies
View Related
May 15, 2009
I have a data set which is in a date format of MM/DD/YY. I have converted it to YYYYMMDD. I now need to copy and permanently past the values so that the value within the cell always reads to result of the date in the format of YYYYMMDD.
Example:
-current = 07/01/08
-new format = 20080701 (cell still reads 07/01/08)
-would like the cell to read 20080701
My main goal is to bring this into Access and use this dataset with another data set, which uses the YYYYMMDD format.
View 4 Replies
View Related
Jan 21, 2008
how do you place 100/0 so the /0 stays static and the 100 can be used to operate? (ie: 100/00, 101/00, etc)
View 5 Replies
View Related
Jul 11, 2014
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies
View Related
Jun 30, 2009
I have an excel file that is used to create a large text file. This is all done manually so I wrote some code to create the file automatically. I have everything working except that I am losing some info. The info is zeros after the decimal point. Almost all of the cells are formatted as numbers with 3 decimal places. It is common to have values of 0.000 that end up just 0 when they are written to the text file. Is there a way to keep the formatting (all decimal places)? Here is an example of code that I am using to write data directly from a cell to the file.
View 2 Replies
View Related
May 5, 2007
I just copied a range of data from a website however these numbers are in TEXT format.
Basically each number in this data set has a SPACE behind. This turn the number into a text itself and i cannot do a sum for this range of data. I tried TRIM function and also tried to format it to number but no luck. Also tried to mutilply the range to 1 yet they're still in text format.
View 9 Replies
View Related
May 29, 2007
The problem is even though the worksheet cell is formated to 3 places the text box in the Userform shows many more than this. I have used the Control Source set to read the cell value.
The answer I've seen 'txtValue = Format(Value, "000.00")' which seems very neat and tidy but I'm not sure how to use it or where to place it.
View 9 Replies
View Related
Jun 28, 2007
i have the next formula
=IF(C6="PRODUCT 1","$"&VLOOKUP(B6,N:T,3,FALSE)&" & "&"$"&VLOOKUP(B6,N:T,5,FALSE),"N/A”)
which aberrantly returns text:
$24.675 & $26.2
I was wandering is there a way to format or put a formula which will format the numbers to be with two decimal places. The cell containing the formula is already formatted as number and the source tables are numbers with two decimal places.
i want the result to look like this
$24.68 & $26.20
View 4 Replies
View Related
Oct 5, 2007
Data is: A1B2C3. I need:A1-B2-C3. Custom format 00-00-00 only works on numeric data?
View 8 Replies
View Related
Feb 19, 2008
I need to evaluate some offers and for the management I need to follow some strict rules like:
1. € 1.000.000 instead of €1000000. But that's not the problem
2. to use maximum 3 digits... Example: 10,2 or 6.12
I tried with an if function and then round, but I think that's not right way. If number < 10, then round with 2 decimal places else, round with 1 decimal place
View 3 Replies
View Related
Apr 5, 2007
way to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
View 9 Replies
View Related
May 29, 2007
'TextBox1.Text = Sheets("Shet1").Range("a1").Text'
However I have thirty text boxes on the Userform all linked to cells on a sheet. How do I apply this so that I dont have thirty lines of code. It just does not look elegant. I'm doing this because the number on the userform shows more decimal places than the cells format. Cell formated to 3 places Userform shows about 9 mostly .999999 etc
View 9 Replies
View Related
Sep 14, 2007
I have been playing with custom formats recently and I'm wondering if there is anyway to make them wrap?
specifically I have several results that I have been formatting to show what they are related to
397235 visitors 392648 visitors 365487 visitors
I want these to display as visitors, but still be numbers so that they can be summed etc.
The problem is that I need the text to wrap so that visitors is on the second line in the cell. unfortunatley all i get is a ########## error to show the cell is not wide enough even with wrap text turned on.
View 9 Replies
View Related
Aug 3, 2012
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
View 3 Replies
View Related
Sep 18, 2009
I have used this forum periodically and it has saved my bacon on numerous occasions so I know someone can help with this!
I created a workbook for staff planning and it's becoming a behemoth!
I'm wanting a range of cells within a row to change the number format to "[hh]:mm" based on a value in the 2nd column of that row. I have played about with a few things and can't seem to get it to work. What I have so far is this:
View 9 Replies
View Related
Nov 2, 2011
I'm trying to insert a random number into the unprotected cells on a worksheet depending on the type of number formatting in the cell. There are 4 basic cases:
Number formatted as percentNumber Formated general with no decimal placesNumber formatted general with two decimal placesNumber formatted in thousands
The code below only contains three criteria, I was trying to get that to work first....Based on this criteria I want to insert a random number of an appropriate size. Please find the vba below.
Sum randomnbr()
Dim F as String
For Each c In ActiveSheet.Range("A1:AK2500")
F = c.numberformat
If c.Locked = False And IsNumeric(c.Value) = True And c.EntireRow.Hidden = False And c.EntireColumn.Hidden = False Then
If F Like "*#,##0*" Then
c.Value = Round(Rnd, 0) * 1000000
If F Like "*%*" Then
c.Value = Round(Rnd, 2)
Else: c.Value = Round(Rnd, 2) * 1000
End If
End Sub
View 4 Replies
View Related
Sep 29, 2008
Is there anyway of converting the output (which is 7 and in text form) to a useable number format so that I can take advantage of the VLOOKUP function (instead of getting a #N/A)....
View 9 Replies
View Related
