I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
I would like to format a row of cells. I want each cell in the row to contain (and show) both an interger and text. The interger will range in value from one to ~10,000. The text will always be two characters long...but these characters will change from cell to cell.
Elsewhere in the spreadsheet I will have a cell (w/ a formula) that counts the values of the intergers in the row, but ignores the text in each cell.
a procedure for format ing the cells in the row?
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Text to Number or General.xlsx
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
I used to get data from a database (CorVu & MIMS) in this format "0122458/001". Due to changes in those Databases I now get the data as 2 columns " 0122458" and "1" .What I need to do is somehow get this back to the old format including the leading zeros.
View 8 Replies View Related(3) examples when I type a number to a cell:
If I type a number "1", I want that cell to show 1.000% but not 100.000%.
If I type a number ".2", I want that cell to show 0.200% but not 20.000%.
If I type a number "25.5", I want that cell to show 0.255% but not 2550.000%.
I play around with the below custom format cells but they do not work.
_0.01*#.000%
_0.01*#,.000%
0.01*#,.000%
I could use two cells one for number, other cell has a % mark. But I rather to format a single cell if it is possible.
Is there a way to format a cell based upon a condition? If the cell value is <1, I want to show two decimal places. If the cell is >1, I want to show zero decimal places. I tried to use the conditional formatting, but there is no option for this.
View 3 Replies View RelatedI'm trying to get an excel custom number format to show the difference in two dates as 0 years and 0 months...for e.g.
Cell a1 = commencement date = 1/1/05
cell a2 = expiration date = 12/31/10
Then cell a3 = Lease Term = 6 years 0 months.
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
Lets say cells A1 to A5 contain these lines of information:
Till 174 (T0215) - till keeps turning itself off.
Till 245 - stuck on windows screen
116 - keyboard is unresponsive
Berkel Scale is constantly beeping
ped not reading cards Till 156
How can I show only the numbers from these cells (i.e. B1 will be 174, B2 will be 245 etc...)? As you can see the number isn't always in the same place, and doesnt always have the same characters either side.
I want to convert number format to text format, any formula ?
View 6 Replies View RelatedI'll get straight to the point: How can I change this text format from 474556788 to 0-47455678-8 (dash added after 0 and before the last number). I need to apply this to around 5000 rows (can't do that manualy). I want it to be int his format:
474556788 to 047-455678-8
Tks Auto Merged Post;474556788 to 047-455678-8 (This is the wanted format)
I can't seem to make user-defined format that puts a text in front of a number and/or a text.
Let's say I have A1: 13, A2: texttext A3: text7 and I want to format a lot of cells to "Ilike 13" / "Ilike texttext" / "Ilike text7"... ie add the same text in the front of the cell, no matter what the content is.
I did manage it seperately, with "texttext" @ for text and "texttext" # for numbers, but what's the general one?
I have a data set which is in a date format of MM/DD/YY. I have converted it to YYYYMMDD. I now need to copy and permanently past the values so that the value within the cell always reads to result of the date in the format of YYYYMMDD.
Example:
-current = 07/01/08
-new format = 20080701 (cell still reads 07/01/08)
-would like the cell to read 20080701
My main goal is to bring this into Access and use this dataset with another data set, which uses the YYYYMMDD format.
I have an excel file that is used to create a large text file. This is all done manually so I wrote some code to create the file automatically. I have everything working except that I am losing some info. The info is zeros after the decimal point. Almost all of the cells are formatted as numbers with 3 decimal places. It is common to have values of 0.000 that end up just 0 when they are written to the text file. Is there a way to keep the formatting (all decimal places)? Here is an example of code that I am using to write data directly from a cell to the file.
View 2 Replies View RelatedI just copied a range of data from a website however these numbers are in TEXT format.
Basically each number in this data set has a SPACE behind. This turn the number into a text itself and i cannot do a sum for this range of data. I tried TRIM function and also tried to format it to number but no luck. Also tried to mutilply the range to 1 yet they're still in text format.
The problem is even though the worksheet cell is formated to 3 places the text box in the Userform shows many more than this. I have used the Control Source set to read the cell value.
The answer I've seen 'txtValue = Format(Value, "000.00")' which seems very neat and tidy but I'm not sure how to use it or where to place it.
i have the next formula
=IF(C6="PRODUCT 1","$"&VLOOKUP(B6,N:T,3,FALSE)&" & "&"$"&VLOOKUP(B6,N:T,5,FALSE),"N/A”)
which aberrantly returns text:
$24.675 & $26.2
I was wandering is there a way to format or put a formula which will format the numbers to be with two decimal places. The cell containing the formula is already formatted as number and the source tables are numbers with two decimal places.
i want the result to look like this
$24.68 & $26.20
Data is: A1B2C3. I need:A1-B2-C3. Custom format 00-00-00 only works on numeric data?
View 8 Replies View Relatedway to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
'TextBox1.Text = Sheets("Shet1").Range("a1").Text'
However I have thirty text boxes on the Userform all linked to cells on a sheet. How do I apply this so that I dont have thirty lines of code. It just does not look elegant. I'm doing this because the number on the userform shows more decimal places than the cells format. Cell formated to 3 places Userform shows about 9 mostly .999999 etc
I have been playing with custom formats recently and I'm wondering if there is anyway to make them wrap?
specifically I have several results that I have been formatting to show what they are related to
397235 visitors 392648 visitors 365487 visitors
I want these to display as visitors, but still be numbers so that they can be summed etc.
The problem is that I need the text to wrap so that visitors is on the second line in the cell. unfortunatley all i get is a ########## error to show the cell is not wide enough even with wrap text turned on.
Cell L90 to L120 are input cells where I type " Percentage" or "Dollar Amount". I need the five cells to the right of each input cell starting two cells over, to be formatted accordingly. I read a thread similar to what I'm asking for suggesting a worksheet change macro, but I can't quite figure it out for a range of cells. Also, in case I need to add a row to my sheet before all of these cells, how can I make sure that this will still work without having to go into the code. Is this an activecell thing?
View 5 Replies View RelatedIs there anyway of converting the output (which is 7 and in text form) to a useable number format so that I can take advantage of the VLOOKUP function (instead of getting a #N/A)....
View 9 Replies View RelatedThere is probably a really easy answer to this question but I cannot seem to figure it out. I need to calculate the sum of pages faxed on a fax report at my office on an excel spreadsheet which is downloaded from our server. It appears the file is not meant to be used in excel but it downloads as an "*.xls" file anyway. When I open the file I receive this message:
"The file you are trying to open, 'FaxCetailReport.xls', is in a different format then specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?"
The file is comnig from a trusted source so I select "Yes" and it opens just fine. There are just over 50 rows of info, one of them being the number of pages. In a blank cell I enter "=SUM(select rows)" and the result is a "0". I have converted the cells to the "number" format, no change. When I right click on the cells and select format, the protection tab on the right has the check box "Locked" checked and unchecking it does nothing, it is checked as soon as you go back in to the protection tab.
The only way around this is to manually retype the numbers in a cell next to the pages column, which is ok for 50 numbers, but I have some sheets where there is over 1,000 entries.
This is my formula and it returns: -55 bps.
=[ASK.xls]QTR!$AT$81&" "&"bps"
However, I want it to return (55 bps). I don't want to just add the parenthesis because in the future this formula could return a positive number. I tried to format the cell differently, but that did not work.
i am looking for excel custom number format for 0 (zero) number that make center alignment..
for example ;
sample (when type 0 (zero) number)
after custom number format
- (right alignment)
- (center alignment)
how make center alignment with custom number format for 0 (zero) number..
How to modify a custom cell format to make data entry easier.
My goal is to have the output look like this: 'A12B-C20D: SET 10: Text string here'
Inputs needed are:
1-3 digit number between A & B
1-3 digit number between C & D
1-2 digit number after SET
Text string of variable length
Where I am stuck. So far I can get "A12B-C20D: SET 10:" to show up properly when 122010 is input. The custom format I am using looks like this: "A"##"B-C"##"D: SET "##": "
When I try to incorporate the "@" symbol the first part of the formatting goes away and the output shows up as "122010 Text string here".
I have tried:
"A"###"B-C"###"D: SET "##":";;-;_@
"A"###"B-C"###"D: SET "##": ";;@
"A"###"B-C"###"D: SET "##":";_@
"A"###"B-C"###"D: SET "##": ";;;@
how can you custom a cell format in which you may in type in information that is displayed as ###-##-####-@# I searched everywhere and cannot find this.
For example, a medicare number.
I would need to type in 581566223b6, and it should be displayed as 581-56-2236-B6.
I received a request from a coworker regarding custom formatting some numbers in his spreadsheet. Those numbers are serial numbers of 20 characters long. Sometimes in my files I use this custom number formatting ###0 and its enough for the data I handle. But when I tried to use it in his spreadsheet, the following shows:
8456891070060510000
The cell must look like this: 08456891070060510302
The reason to have it like this is due to a Delivery Program requirement to deliver Set-top Units for repair. The Delivery Program do not recognize other format than the above. My coworker takes the data from a spreadsheet, and the spreadsheet needs a custom number format to display the correct number.
find a custom number format to be able to display as my coworker need it??
