It works fine, but unfortunately it also shows the "subtotals" in the rows without an "x". "No problem", I thought: this can be easily done with an IF-function surrounding the formula, like this:
But what happened? I got "#N/A!" in each "x"-row!!!
How can it be, that the IF-function affects the inner function???
Meanwhile I've found another formula to solve the original problem
I have three columns of Data. A is vehicle number, B is miles and C is a Date. I want to be able to pull the miles for the newest date when the user types in a bus number next to the formula. I think It can be done with an array formula but I am not 100% sure on how to do it. Also is it possible if they enter a vehicle number and a date that a different formula finds the miles for the most recent date to the date entered.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I have attached a sample of the spreadsheet. The cell/cells in question are f32:f36 on the first tab.
Question #1 how this formula works or what it does.
Question #2 Is when I enter the required information in cells a32:e32 it enters an N/A in cell f32. When I than click on cell F32 and than click on the formula bar and hit enter the information populates.
I am trying to create a formula to determine if my students made a point in high standers, which means if they got a level 3 and about in 2009 verse the student's 2008. Now if they stayed on the same level did they make learning gains. So what I need to do is look at the grade level of the student (Colum C), then 2009 Math Developmental Score (Colum J), and Finally 2008 Math Developmental Score (Colum M). So if the student scored a level 2 in 2008 and a level 3 in 2009 he gets a point, but if he stayed on the same level. The formula needs to look see if he made learning gains. So if the student is in grade 4 and was a level 3 in 2008 and 2009 he would need to score 163 points higher in order to get a point. I have created a helper table with the information need to calculate the information. I have been working on this for about a week I can’t seem to get it right.
I am using the following code to sum a range of cells in a column and compare the result to another column, bolding that column if the two values are not equal. This works, but I am sure someone can offer me a far more elegant (and perhaps faster?) solution.
Dim rngRange As Range Dim c As Range
Set rngRange = ActiveSheet.Range("F22:F522") For Each c In rngRange If c.Value c.Offset(0, 1) + c.Offset(0, 2) + c.Offset(0, 3) + c.Offset(0, 4) + c.Offset(0, 5) + c.Offset(0, 6) + c.Offset(0, 7) + c.Offset(0, 8) + c.Offset(0, 9) + c.Offset(0, 10) Then c.Font.Bold = True Else c.Font.Bold = False End If Next c
I saw a formula on another website that shows calculating a YTD formula using the offset function. The address is:
http://www.beyondtechnology.com/tips010.shtml
I was working on a version where you enter the months in row 1, number data in row 2, and have the month to use in the formula in cell N2 but it did not work. Any suggestions on how to do it properly? Here is my formula:
I have named a range to find the last cell in a column . I then want to build a table which picks this cell and the cells to the right and above (its for a 6 month rolling table).
Ive attached spreasdsheet so i hope someone has a clue what im trying to do.
Currently have a formula to enter the last value in a row in cell B1. What i need is the formula below in B1 then a formula in A1 which will show the value before the last entry in row 1. Maybe an offset unless there is an easier way
=INDEX(1:1,MAX(IF(D1:Z10,COLUMN(D1:Z))))
i.e.If H1 was the last entry in the row I want a formula for H1 in cell B1 and a formula for G1 in A1
I would like to have a sumproduct formula to sum up in a paticular table in my worksheet. But its in a weird table format. Look in cell A1 that is my criteria it should sum cells G24 thru G28 and it should return the total of 1.8000. The rows could varies from time to time in those table formats. Does anyone knows how to accomplishment this.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG27= ABCDEFG1114Y1.8000 2 114C 3 Material #DescriptionMan/Machine ScrapMaterial 4 Operation # Std/Rate lbs5 100510 6 101010 0.56207 8 9 10 114D 11 Material #DescriptionMan/Machine ScrapMaterial 12 Operation # Std/Rate lbs13 14 S-SO2 0.400015 100510 0.895016 101010 0.200017 18 19 20 114Y 21 Material #DescriptionMan/Machine ScrapMaterial 22 Operation # Std/Rate lbs23 24 100910 25 670114X 1.000026 670114C 0.400027 670114D 0.4000Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am using an offset match formula to look at a named range of data and create a validation list of property address's based on certain criteria in cell d1.
My question is it appears the information which is status information seems to have to be sorted, otherwise the list doesnt work properly.
is there another formula to accomplish this with out having to sort the criteria in cell d1 ??
This is the formula i am curently using, it works great if "ListStatus" is sorted and not if unsorted.
I found the following formula, with different sheet and cell references, on someone's site: =OFFSET(CurvCalc!$E$12,MATCH(MAX(CurvCalc!$E$12:$E$10000)+1,CurvCalc!$E$12:$E$10000,1)-1,0)
I googled for the last couple of days but can't find this site again. I have found several that come close like Dave's at http://www.ozgrid.com/News/excel-dynamic-ranges-vba.htm
I am using the OFFSET formula (=OFFSET($A$1,0,0,$B$1,1) and instructions (http://www.ozgrid.com/Excel/DynamicRanges.htm) I found on this site (which is great, by the way).
In the instructions on the site, it requires you to define a range for which the formula to apply. What I tried to do was skip naming the range, and simply using the OFFSET in various cells throughout the file. However, whenever I enter in a row [height] of greater than 1, the formula returns a #Value error. I want to use this offset on multiple data ranges, so naming all of them would be rather time consuming. Is there any way to skip this step?
I'm using a "Large" formula with a variable for the number of cells to sum and then later divide by. However, I want the Large formula to look at the X largest values from a column three to the right, then sum the values in the original column. This wouldn't necessarily be the X largest cells in that original column. I believe this would be some sort of offset, but I'm not very good with those.
I have a problem with a cumulative countif and offset formula that I am unable to solve. See the attached spreadsheet for an example of the dataset I get out from our systems.
I want the formula to be fully automatic, so when I change the month in column K2, it will automatically count all the different outlets in column B based on criteria in column L3 and downwards. The dataset will be updated monthly obviously.
I believe that it could be solved with the usage of a countifs + offset formula or something similar.
The main idea of the spreadsheet is to track the movement of customers between different chains. It is thus important that customers that show up in January will not be counted again in February or March, thus creating an unique countif list based on a given month.
Is there a way to make the last two parts ("height" and "width") of the OFFSET statement formula static (meaning they alway refer to the same cell)? I am inputting a different number in the "colum" section of the formula and every time I do...it changes which cells the "height" and "width" refer to.
On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.
i'm working on an excel file that consists of 31 sheets one for each day of the week, the information about how much we make each day is inputted on the end of each day, i've consolidated all the sheets into 1 big sheet and now i want to create charts over the production, so what i would like is a code that searches the huge sheet for Machine name (Found in Column A and Column I) then walk 5 cells to the right and find the number of litre's made by that machine on that shift.
The different shifts are
Formiddagsskift - Morningshift
Ettermiddagskift - Eveningshift
Nattskift - Nightshift
I will include an example of the data. The data should be pasted to the "Formler" spreadsheet. It doesn't matter if you don't wanna do this i can simply do it later i just need the code to search, and go 5 cells to the right and remember which cell it is, and make sure it is in the right "Shift" ie, all the 282 machines for morningshift are summed in c7 and c10 has eveningshift and c13 has nightshift.
Quite time consuming to search through 31 days of production to find the correct machines on the correct shifts. And the data changes for each month so this would be a great asset to me.
I'm looking for a formula that will take the cells used as a heading and place them cell into columns with the corresponding rows under the heading.
I'm thinking that the formula will have an offset that counts the blank cells in column A then place the text from the heading cells (by heading cells I mean the ones that say "Type A" and "Code X") next to the rows with the products.
Is it possible to use offset formula to move to the next row data? I am trying to achieve all H&S data will be captured in sheet 2. I know there is an easy way to do that by filtering it. But I am trying to automate the summary template in sheet by putting a formula from the data in sheet 1 below.
If I copy/paste, or drag the fill handle to expand the target range I end up with the same formula and same value in all 100 target cells. I know I can edit each cell to modify the offset -1,-1, then -1,-2 then -1,-3 etc but that's mind-numbingly tedious and likely to introduce error.
There must be a way to have a cell reference another, then copy the formula to adjacent cells and and have the result show the content of cells adjacent to the original source.
I've been trying INDIRECT and INDEX with ROW and COLUMN - but I can't work it out.
Where the value in the cell which is referenced is either blank or zero then blank must be returned, otherwise the value which is being referenced by the offset formula.
How to find a tweak to my formula so as to displays blanks rather than zeroes.Here is the formula I have right now:
=OFFSET(L$3,MATCH($B110,$B$4:$B$107,0),0)
I have many rows of data in a worksheet, with the headings in Column B. At the bottom of the worksheet (beginning in row 110), I created a dropdown menu (Validation->List) to select which rows of data from above to be displayed. I simply want to re-display the chosen rows exactly as they are above. But using this offset formula, all the blanks from above become zeroes.
