Offset Formula In Data Validation
Jul 16, 2006
How do I hardcode the Offset function? Right now I am placing the offset formula in Validation from the Data menu toolbar.
Also, I have two columns "Expense" and "Income" used for offset. Expense has 11 selections for the listbox, and Income has only 3. When I choose income from the dropdown in column B, I get way too many blank selections in the dropdown just because It doesnt contain as many items as Expense. How can I re-code adn hardcode the formula so I have only few blanks for my selection.
I have attached a copy "data validation test" to help make things more clear.
View 7 Replies
ADVERTISEMENT
Jul 8, 2006
I'm trying to use three nested Do..While loops to find data in a worksheet and consolodate it in a table. Individually the loops work, however when I nest them only the innermost loop works. The inner loop is written to exit when the Find value is Empty and the other two exit when firstaddress = latest address so they will only cycle through their range once.
Problem is when nested, the middle loop FindNext is Empty and exits on the first go, and the outer loop FindNext looks for the value of the cell above the first found cell, rather than what it should be looking for, and so creates an infinate loop. I thought this might be a problem with the ranges being redefined in each loop but respecifiing the range at every Find/FindNext hasn't solved it.
View 4 Replies
View Related
Apr 20, 2012
I have the following formula in a Data Validation List:
=OFFSET(B8,MATCH(J2,
(CHOOSE(B7,D1Array,D2Array,D3array,D4Array,D5Array,D6Array)),0),1,COUNTIF(CHOOSE(B7,D1Array,D2Array, D3array,D4Array,D5Array,D6Array),J2),1)
In B8 it is the formula =VLOOKUP(B7,LookupTable,2,0). and the lookup array is this 1$H$112$J$113$L$114$N$115$P$116$R$11
So the value returned in B8 will be a the start reference for the OFFSET function. This works but it retuns blank values and not the values in the arrays.
View 3 Replies
View Related
Aug 21, 2012
I have the following function in cell (table 2 column C) where I want to find a contact name from my table TMI if 3 criteria are true (client, account, NAM) For each contact I have 1 true combination of client/account/NAM but for each client/account/Nam I can have several contacts.
{=OFFSET(TMI[[#Headers],[Contact]],MATCH(1,(TMI[Client]=$B$1)*(TMI[NAM]=C3)*(TMI[Account]=B3),0),,COUNTIFS(TMI[Client],$B$1,TMI[Account],B3,TMI[NAM],C3),1)}
The function is working well but shows only the first contact name if I have 3 contacts for the same client/account/NAM. (I pressed Ctrl+Shift+Enter)
When I press F9 on the function, it shows all the contact names! so they are somewhere.
Hence, I have copied and pasted this function into data validation / list in the source but it came up with an erreur.
Table TMI:
A B C DClient
Account
NAM
Contact
Comments
[Code]..
Table with offset function:
A B C D
Chi
Account
NAM
Contact name
Comments
[Code]..
All client, NAM and account lists are dynamic !
View 2 Replies
View Related
Oct 1, 2012
I have a from that work great in PC but if opened in a MAC, some of the functions will not work.
For example, There is one cell with Data validation that based on the value selected in another data validation cell, it should only display all possible options pertaining to value chosen. These are the values: a user select a customer based on customer name. The Data validation will the put the customer number in cell AF3. In another call with Data Validation I have this formula:
"=OFFSET(SHIPTO,MATCH(AF3,SHIPTOColumn,0)-1,2,COUNTIF(SHIPTOColumn,AF3),1)"
SHIPTO is the Name range for the tabs called SHIPTO with "Shipto!$A$1"
SHIPTOColumn is the Name Range for "SHIPTO!$A:$A"
Column A is where the customer numbers are.
This work fine in a PC but not in the MAC using excel 2011
View 1 Replies
View Related
May 8, 2007
What I have:
I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.
What I need:
I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.
IE:
So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.
Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.
the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.
View 9 Replies
View Related
Jan 11, 2013
Is it possible to use offset formula to move to the next row data? I am trying to achieve all H&S data will be captured in sheet 2. I know there is an easy way to do that by filtering it. But I am trying to automate the summary template in sheet by putting a formula from the data in sheet 1 below.
Code
Customer Unit Price
Err
0
[Code].....
View 1 Replies
View Related
Jul 5, 2007
find attached the excel sheet. In sheet1 I have named the range I have inserted a Name(Test) for range $A$1:$A$2(range contains only texts) and have a list validation on cell $B$1 using the name. This works perfectly. In sheet2 I have named the range I have inserted a Name(Test1) for range $A$1:$A$2(range contains only numerics) and have a list validation on cell $B$1 using the name. This doesn't work.
View 3 Replies
View Related
Jan 9, 2014
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
View 4 Replies
View Related
Jul 3, 2008
I have a workbook with two tabs, the first tab "Query" is an Access query that pulls in call data from our phone systems. The second tab "Report" is a userform/report. This will be used by numerous people and has to be as userfriendly as possibly. Because our clients want the data sent this way I don't have a lot of room in changing the report itself.
Let me paint the picture, I have it so the user is able to select the month from a validation list I created in B1, when the month is selected is autopopulates each work day of that month in cells A13:A35. There are several (28 total) reports from different phone lines we have. So I have another validation list in cell B3 that has the name of each report we have. So in theory the user should select the month and report and the information will fill in and they can print that specific report off. The issue is this. I had used the formula =SUMPRODUCT(--(Query!A5:A25004=Report!A13),--(Query!B5:B25004=Aban_08),Query!E5:E25004). I'm trying to find total calls for specific lines for specific dates. The "Report" tab has information from January to current with all 80 different call lines (all named differently such as CDN_5700, CDN_5701). One report such as "Aban_08" actually pulls information from several call lines which is bringing me to my issue, I need one tab for the report, and be able to have the user select the different report, but each report pulls from multiple call line names. Again, I need (for instance) B13 (cell A13 is the date June 2) to pull all calls from the report tab for the date of June 2 with (for example) the names "CDN_5700","CDN_5701","CDN_5702".
View 9 Replies
View Related
Apr 20, 2009
iam looking for formula to display the condtion result .
i have spec in col B and tolerance in col C and col D ( +ve & -ve tolerance respectively) from col E to I ,observed reading data & col j for results.
i want to check the value of col E to I for B C D value n if entire 5 values are within spec then display "0" in subsequesnt col J else display "1"
OBSERVEDRESULTS.L.NOSPEC`+TOLERANCE`- TOLERANCE123451250.20.2262525.225.425.22100.20.2350.20.2450.20.25510.20.2
View 9 Replies
View Related
Jun 29, 2014
I am trying to make a simple planning sheet.
I have a workbook with 2 sheets.
1.sheet contains Columns : DayDateTimeClassTeacherCovered
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1
Harley
Lidia
Livia
Thais
Salete
Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
View 11 Replies
View Related
Feb 11, 2009
I would like the individual cells of C1 and D1 to allow me to input values up to 100. The tricky part is that if D1 equals 100 I would like C1 to be less than 100 and vice versa, if C1 equals 100 then D1 should equal less than 100.
Ex. C1 = 100 & D1 = 10
This should never happen: C1 = 100 & D1 = 100. I would also like an error box to show when either of the cell values exceed 100.
View 2 Replies
View Related
Dec 18, 2012
want to get a formula where I can get the details of City if searched Brand wise and details of brand city wise. I also want option to search say five city names at once and get the brands available in all those cities. I have updated a excel with some dummy data.
View 7 Replies
View Related
Jan 14, 2010
I have a cell that uses list type data validation. I need to be able to update the list of allowable values via a macro and would greatly prefer not using a range in excel.
I've been able to create the string that I want as the formula but cannot change the formula. I'm not very familiar with this aspect of excel macros (data validation)
View 2 Replies
View Related
Aug 19, 2009
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies
View Related
Mar 3, 2014
I'm trying to set a data validation in B1 from values in A1:A5.
A1: Car
A2: Papers
A3: Pencil
A4: Pants
A5: Shoes
What I want is show in dropdown list the words in singular (without the "s" at the end).
The formula below works if I introduce it in a normal cell,
[Code]....
or as array formula with CRTL+SHIFT+ENTER in this way
[Code] .....
But I get the message that the formula has error when I introduce any of both in "Validation Criteria"-->Allow "List"-->Source.
View 7 Replies
View Related
Feb 20, 2012
if it is possible to have data validations on a cell within Excel but allow a user to input a formula? The data validation is a decimal between 0 and 1 and the formula would be a vlookup.
View 4 Replies
View Related
Jun 14, 2007
I am trying to use the validation feature to calculate a check digit and the formula is too long to put in validation. I rewrote the formula to be shorter using math features instead of text, but apparently you can't use arrays in validation. Because of certain distribution constraints, using VBA is not possible so a UDF is out. Can either of these be shortened in anyway? I am not sure if it is even technically possible to solve this problem with these constraints.
Here is the "human readable" explanation of formula:
(Accept only 10 digit numeric value.)
Example Number: 123456789-3
Digits 1,3,5,7,9 are multiplied by 2 (weighted 5)
So 1,2,3,4,5,6,7,8,9 becomes 2,2,6,4,10,6,14,8,18Weighted 5's multiplied values then have their individual digits added (ex:12=1+2=3)
So 2,2,6,4,10,6,14,8,18 becomes 2,2,6,4,1,6,5,8,9
Weighted 5's sum is added to the sum of the Nonweighted 4 digits.
So 2,2,6,4,1,6,5,8,9,3 becomes 43
Add 24 to sum.
43+24 = 67
Checksum = (10-(67 mod 10)) mod 10
(Sum round up to 10 minus sum)
Method 1 ...
View 9 Replies
View Related
Feb 16, 2010
I have a range named as follows in a formula:
BaseCase!$O:$O
I have a data validation from which the user can choose another tab.
So, how do I change the reference above to:
TabName!$O:$O
so that TabName refers to the text string in cell B2 (data val. box)
I tried to use TEXT to no avail. I imagine there is a simple solution, but I am at a loss.
INDIRECT perhaps?
View 9 Replies
View Related
Feb 22, 2012
Is it possible to validate a string with both numbers and text with a formula using data validation? (I don't want to use a User Defined Function)
in Column C, Starting in cell C2 I have a 12 character string of six numbers, four letters, and two numbers. like this:
280838ZNOV11
is it possible to use a Custom Data Validation formula to ensure the user follows this format?
View 9 Replies
View Related
Nov 14, 2013
I am trying to get my array formula to recognize the text selected in my data validation cell. The formula worked perfectly until I decided I wanted to try and use a data validation list to eliminate spelling errors. Even though the text I am trying to recognize in the cell is exactly the same, because it is in a data validation format it no longer works. Is there a way I can modify my formula so it works? Example below...
formula: {=SUM((A2:A109>DATE(2013,10,31))*(H2:H108="Joe Blow"))}
A2: 11/2/2013
H2: Joe Blow (chosen from a data validationi list)
The result of the formula should equal 1 in this example, or more if the same criteria occurs more than once within the range of A2:A109, and H2:H109.
View 7 Replies
View Related
Jan 25, 2014
Can I limit the text length in a cell that contains a formula? You may say "Limit the text length in the input cell". That can't be done because the formula in the resultant cell takes text from two other cells in addition to the input cell. I need to limit the overall text length to, let say, 50 characters.
View 7 Replies
View Related
Mar 11, 2014
Using frequency in a data validation formula for ensuring unique entries.
Currently I use COUNTIF($B$2:$B$244,B2)
View 4 Replies
View Related
Apr 30, 2014
I am quite inexperienced with Excel and I am struggling to understand how should I set up a formula, within the data validation function to achieve the following:
I need to restrict a certain set of cells, for people to be able to input only the following values: "1", "0.5", "A", "H", "0.5A" (or 0.5a), "0.5H" (or 0.5h)
And I would need the data validation tool not to include blank cells.
View 1 Replies
View Related
Mar 5, 2009
I require a custom data validation formula to limit cell value to maximum of 4 decimal places.
0.0001 ok
0.02 ok
0.3 ok
0.12345 fail
0.123456 fail etc
View 2 Replies
View Related
Feb 15, 2014
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
View 1 Replies
View Related
Apr 3, 2009
I have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.
View 2 Replies
View Related
Feb 8, 2010
I have attached a sample of the spreadsheet. The cell/cells in question are f32:f36 on the first tab.
Question #1 how this formula works or what it does.
Question #2 Is when I enter the required information in cells a32:e32 it enters an N/A in cell f32. When I than click on cell F32 and than click on the formula bar and hit enter the information populates.
View 2 Replies
View Related
Sep 26, 2007
I would like to know if it's possible to populate a data validation list based on what is selected from 4 validation lists?
for example:
On sheet1:
If 'Group1' is selected from data validation list1 then data validation list5 will show a list of all items from Group1. If 'Group2' is selected from data validation list2, then data validation list5 will display all the items in 'Group2'...
(I do not want to use a combo box for this)
View 9 Replies
View Related
