I created a workbook that is scheduled to run at 5am every morning and complete a series of tasks so that i can begin my morning with a couple things already checked off of my list. However when i arrive each morning i find the workbook has been opened, but has not completed its assignments. The code should complete the series of tasks, then send an email to myself, then close.
When I arrive in the morning, i open the workbook, and it was taking 3 tries to get it to run all the way though, each try getting a little bit closer to completion but not finishing. Then i checked a checkbox to tell it to awaken my computer before running, and then it only took me 1 try in the morning, so theres progress, but i still need this to run at 5am, especially so that on days I am not at work these tasks still get done.
VB:
Private Sub Workbook_Open()
Dim WB As Workbook
Application.DisplayAlerts = False
Set WB = Workbooks.Open("path")
Application.Run "workbook name/sub name"
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB: Sub OpenWorkbooks() Dim WorkbookOpen() Dim WBnames() As String 'Array of WorkBooks to be Open Dim WorkbookCnt As Integer
I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
Create a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
I have built a sub that prompts the user for a folder then opens every workbook in the folder 1 at a time to get stats on the contents of each workbook. Worked like a dam until I ran into an unexpected bug. Some of the users built on open events in their workbooks. ...
Right now my routine inventories workbooks to get formula counts, cell counts, most complex formula, highest value... it does this by looping throught the sheets and the cells. If there is a way of obtaining those stats without opening the workbook I may need to rethink a lot of my work.
way to suppress the code in the target workbook I open through workbooks.open
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet() If ActiveSheet.Index <> Sheets.Count Then Application.DisplayAlerts = False Set ws = ActiveSheet Sheets(ws.Index + 1).Delete ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2") 'Moves active sheet to beginning of named workbook. 'Replace Test.xls with the full name of the target workbook you want. Application.DisplayAlerts = True End If End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
how to make a MsgBox open anytime a cell in Column A was double-clicked--and the content of the MsgBox was from the cell in the same row in column Z. I've now realized the double-clicking isn't an ideal solution, as it's easy to click in another cell and mess up all the formulas.
(1) Code that deactivates the "edit directly in cell" option when the workbook is opened.
(2) Code that opens the MsgBox when a cell in Column A is clicked just once (or similarly less fool-proof than double-clicking or right-clicking).
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open() Dim dTime As Date dTime = Time If dTime >= TimeValue("9:30 PM") And _ dTime < TimeValue("9:40 PM") Then ImportData End If End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
I use Excel 2003 on a Windows XP operating system. I update a rather large xls file (5.9 mB) daily. I saved an update yesterday, but when I went to open it from my directory today, nothing appeared.
The file is listed, with its properties, in the directory, but when I request the file, Excel opens, nt the file.
None of my other files seem affected. They open normally.
When I click on a hyperlink inside an Excel spreadsheet, it is linked to a PDF file. When clicked, the screen flashes the Adobe Acrobat program for a split second and then disappears. But I can open the hyperlink same as which it is linked to a word file in the same directory. I have gone into folder options and switched the PDF to open with Adobe reader 8, but that does nothing.
Any ideas of how to get the PDF to open and stay open would be most appreciated.
I tried to install adobe reader 4.0 without uninstall adobe 7.0 professional. I use pdf reader 4.0 open the Pdf file in the window explorer, and then go to excel, open the same hypelink pdf file, and find it works now only opening pdf document by pdf reader 4.0 but not by 7.0.
But when I resinstall adobe 7.0 professional, and the problem still occurs. I have to open the original pdf file in the directory by adobe reader 4.0 again.
My case is like the following Macro in excel. Setup hyperlink and open it . Then the problem is shown as my previous thread mentioned.
I have a problem and i believe someone else has this too. I have an excel file which contains near 600 hyperlinks to different websites. But my problem is i cant open more than 1 hyperlink at the time and in that way going trough 600 websites would take like 4days, is there any program / Software, plug in, or ANY way open Many hyperlinks same time so i dont need to click 1 after 1?
I tried
Sub OpenUrl() Dim r As Integer
r = 2 Do Cells(r, 1).Hyperlinks(1).Follow NewWindow:=False, AddHistory:=True r = r + 1 Loop While Cells(r, 1).Hyperlinks.Count End Sub
