I have a worksheet with conditional formatting to shade (with the color grey) every nth column using the =MOD(COLUMN(),5)=0 function. I need to manually add cells formatted with various other colors to my worksheet. Some of the colored cells overlay the conditionally formatted shaded columns and the shading shows rather than the colors. I want colors to show on top of the conditional shading.
View 3 RepliesHow to change color of the cells that are between the average and 1 standard deviation. The rules that I applied are 1. 1 standard deviation above change to Yellow, 2. 2 standard deviation above change to Orange, 3. 3 standard deviation above change to red 4. equal and below change to green. However when I apply these rules then everything within the average and 1 standard deviation remains white. I have attached my excel file.
View 2 Replies View RelatedThe problem is that Excel always stop when it found a condition being "true".
I have table with a range of percentages and a "standard percentage value"
I now want to highlight all percentages into three traffic light colours depending on whether they are:
1. 80% greater or less than the standard value (RED)
2. 50% greater or less than the standard value (ORANGE)
3. If else then they are ok (GREEN).
in addition it would be nice to have those boxes which display 0 in blue.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedCan I use conditional formatting to determine if a number in a cell is displayed as a normal decimal or scientific?
So a number of 1000 or above will be changed to scientific notation with 4 significant figures.
The conditional formatting just seems to be about colour/shading/icons
In conditional format I've this formula
=countif($Q$2:$V$2,B2)>0
which will return any matching numbers in yellow.
My question is can I insert that once that row reaches 10 matching numbers the row turns green.
I have two colums A and B with a lot of data and want to use Conditional Formatting:
Cell Value Is
equal to
=$A$2 $A$352
What formula do I have to use to format all cells (colored) in the colum B with any existing value in between A2 and A352.
THE VALUES ARE WORDS
I have a range A1:A20. Each cell in this range contains a number between 1 and 100. I'd like to be able to format this range so that the top 3 or largest 3 numbers appear in red.
View 3 Replies View RelatedIs it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
View 8 Replies View RelatedI have a large spreadsheet with a number of columns that are set up for conditional formatting. For example a column of "BUY"'s and "SELL"'s where the "BUY"s are formatted with the default "light green fill, dark green text". I have other columns that are conditionally formatted using a formula. When I base the result on a formula I don't seem to have the option to use the default formats. Is it possible to use the defaults or maybe even how to customize my format to look like the default? It would look a lot better if I had a uniform red/green style throughout the sheet.
View 1 Replies View RelatedI have set 3 conditional formatting rules where the row from column A to K will change depending on the value on column L.
Selection is equal to A3:K100, conditions are similar to:
- Formula is =$K3="PIP"
Then for formatting I chose WHITE BOLD FONT & BLUE SOLID PATTERN, for example.
Conditional formatting only allows 3 conditions. If this can be replicated
using VBA, then you can set "n" conditions, correct?
I would like to change the number format of a cell in function of the value of another cell. For example, if A1=1, then I would like the cell A2 to be displayed as a percentage. If A1=2, then would like the cell A2 to be displayed as a number.
View 4 Replies View Relatedconditional formatting in Excel. I have two columns with pertinent information. I need to know the following and format accordingly:
1. Is the number in column A positive or negative?
2. Is the number in column B less than 0.05 or 0.10?
I would then like Column C to just be highlighted a certain color depending on the combination... there are 5 possible combinations and I would like the cells to be formatted so that:
1. Positive and less than 0.05 - Bright yellow
2. Positive and less than 0.10 - Pale yellow
3. Negative and less than 0.05 - Bright green
4. Negative and less than 0.10 - Pale green
5. This "combo" just means the criteria wasn't meant... which is possible b/c sometimes Column A may have text instead of a number of b/c the number in column B is not less than 0.10. If either of these is true, I want the cell to remain blank.
As a pert of a spreadsheet I have 2 columns (M5:N400) of 400 cells deep. Each cell in these columns contains a formula that counts days, when appropriate. They can end up showing a value of blank, a number between 0 and 5, or any number greater than 5. (But very rarely greater than 30)
If the number is greater than 5 then it means that it has exceeded it's target time and I wish to highlight this with conditional formatting (CF). I have a CF on all cells in both columns that says.
If "The cell value" is "Greater than" "5"... then
format the background colour to a pale yellow.
It works, but doesn't work.
If the cell value is 0 to 5 it's unchanged. Good.
If the cell value is >5 it changes. Good.
BUT, if the cell is blank it also changes. Bad!!!
I assume it is because it is looking at the fact that there is a formula in the cell, even though the displayed value is "". So I tried a second level saying that if the cell is equal to "" then no format, but it still changes.
I want to format 3 columns in excel depending on certain value from another column.
By example: I have the columns A B C completed with some text. On the column D it will be the numbers 0 or 1. If the number is 0 the background color from A,B,C columns shall be Green, if the number is 1 the color shall be red.
I have tried in conditional formatting with the formula =$D$1=0 but the color of the columns are changing only depending on the value from cell D1. I don't know what is the correct formula. For column A1 I want to check the value from D1, A2 - D2, A3 - D3,...,An - Dn.
I´m having aproblem with Excel 2007 about Conditional Formatting. I have a row of Dates for example 02-01-2009 03-01-2009 04-01-2009 , etc in different columns.
Then what I want to do is use Conditional Formatting to Format cells on several rows below according to the day (if its weekend paint red, if not, dont do anything). I'm using the "Use a formula to determine which cells to format" and the condition is (supposing the cells with dates are A1 to C1)
=WEEKDAY(A1:C1) > 5 .
So with those 3 dates provided lets suppose Januar2nd is not a weekday, so the outputIwant is: Red White White, (Next Row) Red White White, etc for several rows.
Now what I think is not right is it only works for the row in which I have the cursor so its like: (Lets imagine I selected 3 rows on which I want to see that output) Red White White (The row in which the cursor is works fine), but the next row goes Red Red Red and the third the same.
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedCan i copy format from conditional formatting to other sheet or cells?
View 9 Replies View RelatedHow can I condition format a cell to show no format if the cell contains a date
Please see the attached book1.xlsx for more info. Book1.xlsx
When I hit the macro code you see below I get both columns D and E, starting from row 18, to get 'filled down' to the specified spot. Every second row has a conditional format (when a value is entered in column A) to change the row to the color grey, and every row between it has a conditional format (when any value is entered in column A as well) to have the row changed to the color red. The issue here is that the Macro code messes up the conditional formatting and uses the conditional formatting of those two cells, which are being dragged down, for those entire filled-down columns! This is what I am starting off with test1.xlsm and this is what I end up with using the macro code below (or doing it manually)
test2.xlsm
Is there a way for the Macro code to bypass this issue?
I'm getting a time data on the format "0h 00m 00s" but I can't convert it to a standard "00:00:00" format to properly handle it and I'm not so Excel savvy. I already tried looking for something on google but the formulas for similar issues "0h 0s" or "0d 0h 0h" are not working (I can't find a way to adjust them). For example: I'm have the following data on G3:
0h 37m 52s
and I'm using the following TIME/FIND formula:
=TIME(FIND("h",G3),FIND("m",G3),FIND("s",G3))
but the outcome is "2:06:10" instead of "0:37:52"
I have all these spreadsheets from different vendors and all of these spreadsheets are in totally different formats. Is there a way I can create one macro and apply this one macro to all spreadsheets to get me a standard format?
View 9 Replies View RelatedI click on a cell it automatically opens a new email, with the cell contents as the To:XXXX@XXX.com and a standard mail format. Is this possible?
View 4 Replies View RelatedCan someone please help me with my query?
I have a large database and would like to calculate standard deviation based on a condition "Yes" or "No".
Shown below is a small layout from my database: ....
I'm copying data from another source to excel, and for certain date entries they come as text in the following format "On 14 May at 8:00". Is there anyway to convert multiple entries like this into a standard date format? With or without time is fine - just the date will do.
View 4 Replies View RelatedIs there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value? eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm. Other than creating a table and using a vlookup function
View 3 Replies View RelatedI have a standard mail format which was saved in my hard drive(mail includes attachments and few contents in body) via excel. I've several vendor (#)numbers in my excel sheet, everyday I've to send a mailer to different vendors with necessary documents.
1. Vendor number EX: 12345 was hyperlinked, when I click on that 12345 standard mail format should be opened in outlook and the Vendor number 12345 to copied as TO:12345 CC: defined names in the outlook mail.
I'm trying to find ways of applying a formula in condition formatting to find entries which don't follow a certain format.
to be clear, this is for a reg plate of a car. There are two styles of formats. The X's represent A-Z and # represents numerical values
1. XX##XXX
2. XX####
find a way of applying two test cases (non-simultaneously) so that cells highlight if they don't follow either of the above conditions?
I need to set up some conditional formatting on my spreadsheet, however I am having a little trouble with one of my conditions. The requirement is:
- if a cell value in column X contains the word "open", format row background to yellow.
- if a cell value in column X contains the word "resolved", format row background to green.
- if a cell value in column X contains the word "moved" OR "closed", format row background to blue.
Now I have manged the first two on my own, using the conditional formatting tool and using the formula "=SEARCH("open",INDIRECT("X"&ROW()))".
However I am stuck on the last one. I tried...
=OR(SEARCH("resolved",INDIRECT("X"&ROW())), SEARCH("closed",INDIRECT("X"&ROW())))
However this doesnt work. I tried looking at adding VB script in but to be honest I am not a VB programmer and cant really spend too much time on this. fix the final conditional format so it run if the cell contains either "resolved" or "closed"?