I have a userform with a button that wil run macro "sub1". If "sub1" encounters an error on a worksheet it wil show a custom
error messagebox(a userform) that contains the option "Don't ask me again". If true it sets a global variable. Do I need to use global variables to pass to the original procedure "sub1" for the ok/cancel buttons too or is there an other method?
I have userform1 with commandbutton1 and listbox1. From listbox1 you make a selection and then you click commandbutton1 and it calls up another form (userform2.) On userform2 I have a label that I need to capture the value highlighted in listbox1 form userform1. How do I write this code to have label update to the listbox selection?
View 2 Replies View RelatedI have a sheet with two user forms. One which collects a few options and a second where I use a webrowser and some more options on it to do some tasks as per the options selected in number one.
I am having problems because I need to use the options that are selected on the first user form and apply them on the second userform by using if statements.
So basicaly the question is how can I use a variable defined in one userform and apply it on another userform?
Today's question concerns one sub calling another, having the called sub do some stuff that then effects what the calling sub does.
Essentially
Code:
public sub sub1
dim x as integer
dim countCall as boolean
x = activesheet.cells(1,1).value
countCall = False
call sub2(x, countCall)
[code]....
Obviously the above is a very simplified version of what I'm trying to do, since everything there could of course be handled in a single sub. It is for illustration purposes only. My actual main sub needs to call the secondary sub repeatedly in some stacked loops and its in-feasible to but the second sub's code into the main thread.
The problem remains though, I know how to call a sub and pass variables to it, i just have no inkling on how to pass results back to the calling sub. I've tried a few things I've found around the web but I seem to be missing something important.
I am having trouble defining a variable in a For loop. When I run the loop the first time everything seems to work fine, but when the loop goes back through the second time it carries its previous value with it. Here in lies the problem if the variable is supposed to be empty (not assigned a value). So, for example: 'Variable' in the code below may or may not be given a value depending on the conditions in the For i loop. If it is given a value then 'Variable' will still have that value on the next pass through the For j loop. And if none of the conditions are met for the If statement in the For i loop the second time through the For j loop, it should be an empty variable, but instead the code is reading it as having a value (from the previous pass through the For j loop).
[Code] .....
I have tried using:
[Code] .....
After the For j line, and instead of using:
[Code] ....
I tried using:
[Code] ....
and I've tried:
[Code] .....
I get an Object error with either line I use. I just want to be able to reset the variables each time through the For j loop so in the case of an empty variable, it doesn't try to calculate based on the previous value.
I am trying to pass a public variable to another module in the same workbook. On Module1 I declare at the top
Public stores
Sub Main()
Dim stores(1 To 100, 1 To 10, 1 To 10)
Reader
...which then calls the procedure Reader in Module2
Sub Reader()
let x=1
let y=1
let z=1
let stores (x,y,z)=activecell.value
I've left out the portions of code that seem irrelevant. When the macro runs, I get a type mismatch error on the "let stores" line. If I move the code from Reader into the procedure Main, it works, so it seems to be an issue with passing the variable. I haven't used multiple modules very often so this is probably a very basic issue.
I am looking at using forms, as in the Userform... Not used them before, but would like to know, if you create a text box on it, is the value global, so any module can use the var? or how can I, so that value entered can be used on the whole book ?
View 3 Replies View RelatedHere in the code wbResults is a Workbook present in my present folder. In the Sheet1 and Column "I", the result of test cases is entered. The Result of the TEST CASES can be PASS or FAIL. So i am trying to get the total number of PASS test cases and Total FAILED test cases. BUT with the code i have written, i am not able to fetch the right data. Is the method of comparing wrong? or what else? i have tried to debug but nothing comes out.
Do While Not i = 1008
If (wbResults.Worksheets("Sheet1"). Cells(i, 8) = "PASS") Then
PASS = PASS + 1
End If
i = i +1
Loop
I have a worksheet which I've set to read-only, I am trying to get it to pull in information from external worksheets. I've created a Macro that will automatically bring in the data however it will only go into a pre-defined cell/row. I have another Macro which looks up the next available row (which is where I want the data to go) but can't get it to link into the macro's. In short, Macro1 brings in data, Macro2 finds next available row, Macro3 brings in another worksheet, Macro4 finds next available row etc etc.
Sub Macro3()
With ActiveSheet.QueryTables.Add(Connection:= Array( _
"OLEDB;Provider=Microsoft.Jet.OLEDB.4.0;Password="""";User ID=Admin;Data Source=C:Documents and SettingsjspencerDesktopExcelAMMH.xl" _
, _
"s;Mode=Share Deny Write;Extended Properties=""HDR=NO;"";Jet OLEDB:System database="""";Jet OLEDB:Registry Path="""";Jet OLEDB:Database" _
, _
" Password="""";Jet OLEDB:Engine Type=35;Jet OLEDB:Database Locking................
When working in an userform, and you call another sub routine within the userform, will all variables passed automatically be byref (no way to do byval?)?
View 3 Replies View RelatedUnzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I have a VBA application that seems to work fine under vista but once I start working with it in Windows 7 I notice sometimes one of my userforms do not go away when asked to hide. The code is like follows:
Application.ScreenUpdating=true
Waitingform.Hide
I have created a userform and command button within an excel spreadsheet to run the userform and then manipulate the data entered into the userform. However when I click the cancel button of the userform the macro tries to continue to manipulate the data entered, of which there is none and then comes up with an end/debug command. Is there an If and Then statement in VBA that I can use so that if the 'Cancel button' is clicked then the rest of the Macro won't run.
View 14 Replies View RelatedI designed some userforms on a worksheet for users to click and input information. However, i am wondering if it is possible to have an additional feature to the userform.
Currently the userform only have labels such as Title, Dept, Branch, Unit and the respective textboxes for user to input information. As it might be unclear to some users i would like to have an additional feature such that when user roll their mouse over the label "Branch", the user will see a box where more information is given or rather an example such as "Dept XYZ", allowing user to have a clearer idea of what to fill in. Is there any way for me to add this feature?
I have a UserForm which has a ListBox and other TextBox, I have an issue when I select any option from the ListBox. I transfer data from the Form onto a Worksheet, which works great until I reach the ListBox.
My problem is that when I enter the information and click submit which will save the Data and send it to an Access Database. The problem arises on the ListBox. I get an error message Run-time error 3265 "Item not found in this collection"
I dont understand what the error is, how can I get around this so that all the data is written to the Worksheet and can then be transfered to the Database?
I was wondering if there was a way to add comments (that you see in spreadsheets) on a userform in vb editor. So that when you run the form and the user moves the mouse over a textbox then it displays the comment.
View 2 Replies View RelatedI'm having trouble with checkboxes - I've set up the userform but I can't seem to get it to send values to the specific cells when certain options are checked.
The way it should work is there will be an action and this could be involved with 1 process or 40 processes (and anything in between) and what will happen is the userform will pop up and ask what processes the action is applicable to. The user will then tick the correct ones and the form will then place these values in the corresponding cells next to the action.
1) I have added multiple command buttons as options within different categories but when I select one, all others are reset. Is ther a way to section off the command buttons into groups so that say the first three act together, the next two act together and then the last four act together, allowing a total of three options within three different categories?
2) How do I get the options from the userform to the worksheet?
3) How do I put an input box on a user form?
I'm trying to hide a UserForm (using myFrm.hide) once the command button on the form is clicked. I'm getting the following error:
Run-time error '402'
Must close or hide topmost modal form first.
Apparently the form isn't the 1st in the z-order. How can I see the z-order of my forms?
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
I have an easy question regarding the Multipages in userforms. If I want to use Multipages, do I simply create a new userform, then select "multipages" from the controlbox and distribute all over the whole userform ?
View 9 Replies View RelatedI would really like to be able to have a function in a workbook that can run methods (for example Show or Hide) on a UserForm inside an add-in like this:
Public Sub Test_Addin()
frmTest.Show False
End Sub
where frmTest is a UserForm inside the addin. After the add-in has been added as a reference, I am able to access all of its functions/subs in this way. When I try to access a form inside the add-in from outside the add-in, I simply get an object not defined error. Looking more closely, if I type in "eRFTEAddIn." (which is the name of the add-in) and look at the possible options, the forms do not show up...although the modules and sheets do.
I am creating a userform with a listbox.
When I select multiple values from the listbox, how do I apply the selected set of values (user can select up to 10 out of 80) to a range of cells in a different sheet (in the same workbook), which cannot contain any blank cells?
We have designed a data collection program in excel which use's userforms for the data entry and form printing. There are 20 userforms, each with a "Next" button which hides the current userform and shows the next userform. The first "next" button has a copy and paste code which copies a today() statement and paste's it in a different cell to record how long it took to complete the data entry. We are able to go through the program once, but when we try a second time it freezes and the cpu usage goes to 100% resulting in us having to End Task.
View 6 Replies View Relatedis there any way to accept the data directly on the userform(excel)? it may on some html control on userform or any other possible way to deal with.
View 2 Replies View RelatedNeed any tips on making userforms look more appealing? Right now i prefer to have all my userforms displayed in white like the attached picture. let me know if you have something that looks better or if you disagree with the "white" theme and prefer something else.
View 2 Replies View Relatedi have a form that creates a pop-up (another form) and i want that pop-up to remain on top of the original form until the pop-up's "submit" or "cancel" button is clicked - the original form should be inaccessible while the pop-up is there.
is it possible to do this in VBA?
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
I am trying to make a little game for a friend of mine. It picks a random number 1-1000 then he gets 10 chances to guess the number. After each guess, it tells him if the number is higher or lower. I have a userform that you put it your first guess, hit a button, and it tells you if the number is higher or lower. All the guess blanks and buttons are on the same UserForm. However, after you push the first button, the UserForm doesn't work anymore. How do I get it to stay functional the whole time?
View 9 Replies View Related