Path/File Error Showing UserForm

Dec 12, 2006

The attached spreadsheet is as simple as it gets - a single userform with a combo box that allows 1 of 4 choices. It gets loaded and displayed in the workbook_open() event - or at least it should - but 9/10 times i get the message "Path/File error" and debug crashes out on the userform.show line. The next time I try and open the file (despite not saving it) Excel crashes and closes! Even re-starting Excel does not allow the file to be opened!

If, however, I open the file with macros disabled, and go into the VBE and manually run the workbook_open() all works fine. I'm using Excel 2003 and I've tried it on other installations - sometimes it will work, other times not.

I've tried every combination of userform load, unload, hide & show with similar results.

View 9 Replies


ADVERTISEMENT

UserForm: File/Path Access Error & I/O Error

Dec 19, 2006

the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)

On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.

All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.

On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!

This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.

View 7 Replies View Related

Userform Show Path/file Error 75

Jan 5, 2010

I have an excel 2003 template containing a userform that is displayed using the workbook_open event.

The userform causes excel to crash with file/path error 75. i have tried many suggestions given on ozgrid and several other forums with no joy.

When the userform crashes, the debugger stops on DataFormNew.show.

I have added stop commands in the initialise procedure to see what is going on and it appears that my userform has disappeared!

to upload the excel template and any other information required to get this sorted.
its size is 765 KB which exceeds the size limit to attach to the post.

here is the workbook_open macro:

Private Sub Workbook_Open()
'On Error GoTo MyError
'Call UnProtectAll

'Dim frm As UserForm
'For Each frm In UserForms
' Unload frm
'Next

View 9 Replies View Related

Crashes On UserForm Show By Next Button (Path/File Error)

Aug 7, 2008

When loading my workbook, my userform loads perfect, but when I go to hit the "next" button. It crashes with the error:

"Path/File access error."

The next button code, quite simple: ....

View 9 Replies View Related

File/Path Error

Nov 19, 2009

We have built quite a large Excel based program that contains quite a lot of coding. the program seems to work fine the majority of the time but every so often we recieve an error message that causes excel to not save, or to crash and shut down.

The message that comes up is "File/Path Error"

Now I've just done some hunting around online and some links I have found speak of declairing the document location correctly in the coding. I was wondering could this be the issue at hand?

Anytime the document needs to save, there is a cell with the directory path and file path declared as a variable (Actually as Dim String) within the coding. Is this the best way to declare a file path?

Also, the problem seems intermittent. We Compile the VBA coding before saving, we also use a Clean Project add-in within Excel. These processes usually help but every so often the problem comes back.

View 9 Replies View Related

Pass Data From Userform To Excel Sheet Using File Path?

Jan 18, 2012

How to pass data from userform to excel sheet using file path?

View 4 Replies View Related

Save Hyperlink Path For File With Absolute Path And Non-Relative?

Mar 4, 2013

is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?

I notice that the hyperlink is ....pdf ry.pdf

if I change the position of the file excel there is a problem!

I would like to save es. d:invoichepdf ry.pdf

View 1 Replies View Related

Trim Full File Name & Path To File Path Only

Sep 27, 2006

I have a variable ("DestFile") that defines a path to a file (used in saving the file)...

I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...

How would I go about trimming the "DestFile" address to get a "DestFldr" address?...

An example of "DestFile" might be;
S:BryanFor KenGulf ConstructionST0609014-t.xls
(the file name length may vary)
What code can I use to consistently trim it back to;
S:BryanFor KenGulf Construction
as the "DestFldr" variable?

View 4 Replies View Related

Macro To Separate File Name And Path From Complete Path

Oct 3, 2012

I want to run a macro to separate File Name and Path from the given complete path

For Example

Code:

In Column A : Given Complete Path " C:MainFolderRecordsSubFilesFile1Record.pdf

I need it separeted like

Code:

In Column B :File Name = Record.pdf
In Column C :File Path = C:MainFolderRecordsSubFilesFile1

Is there any way to do this through a macro

View 2 Replies View Related

Automatically Open File In Specific File Path When Another Sheet Is Opened

Mar 20, 2014

I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls

So opening x.xls will automatically open y.xls

I've tried this in the workbook code area but it doesn't do anything.

[Code] .....

View 1 Replies View Related

Import CSV File Using Cell As File Name & Active Workbook Path

Nov 3, 2009

I am trying to import some csv files so I can combine them, but am having probs with the filename and location.

Sub test()
Dim wsName As String
wsName = ActiveCell
Sheets("Data").Select
With ActiveSheet.UsedRange
LastRow = .SpecialCells(11).Row
End With

With ActiveSheet.QueryTables.Add(Connection:="TEXT; &thisWorkbook.Path &" " & wsName &", Destination:= Range("A" & LastRow))
.Name = wsName
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells.....................

View 5 Replies View Related

Save File As Text Using Cells For Path & File Name

Dec 20, 2009

How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names

pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................

View 2 Replies View Related

User Input For File & Path For File Copy

Jan 26, 2008

Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?

Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub

View 4 Replies View Related

Getting File-path From Selected Input File

Jan 29, 2014

getting full file path from selected input file?

I have a macro with text box and browse button.

User can click on browse button and it will allow them to select only text files.

Now for further processing I need to get the file path and file name in 2 different variables.

Like if user selected C:/Temp/Test.txt

Variable 1 should have C:/Temp
Varialble 2 should have Test.txt

View 2 Replies View Related

Copy File Name And Contents Of That File In A Specified Path?

Feb 5, 2014

I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents.
ex:

file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--

column AColumn B
file name1file contents
file name1file contents
file name1file contents
file name2file contents
file name2file contents

And also i have extend this macro to write a index function. i will tell u about this. but first i need above thing I researched but I didn't find.

I need file name in a column then i need file contents in b column.

if a file has 10 file contents in a file then that file name should come 10 times in a column, and in b column all its contents.

View 14 Replies View Related

Userform Refresh Not Showing

Mar 1, 2007

My macro is called from a command button on a userform. The userform contains 3 command buttons, a label, and an image box with no attached image. When a command button is pressed, the code sets the background colour of the image box to red and changes the label caption to "Processing..". Then screenupdating is set to false, the code runs, screenupdating is set to true, the image turns green and the label says "Ready!".

The problem is that the userform does not refresh to show the changes until the code is finished running, as though the screen does not update the userform before the "screenupdating" is turned off. Can anyone tell me how to ensure that the forms are displayed correctly before the screenupdating is disabled?

View 4 Replies View Related

Userform Textbox Not Showing

Apr 21, 2006

I have a macro with the following code at the start:

Unload UserForm2

returnvalue = MsgBox("Are you ready to update your Records? Did you enter all the bowler scores? Did you change the bowler's Status?" & Chr(13) & "If you answered Yes to all questions, then click YES, otherwise, Click NO & make your corrections.", 36)
If returnvalue = 6 Then
UserForm7.Show vbModeless
Application.Run "Records1"
Else
Exit Sub
End If

Userform7 loads but the TextBox with the text 'Please Wait' doesn't show.
how to show the TextBox.

View 5 Replies View Related

Split File Name From File Path

Feb 16, 2008

Each month I am sent a spreadsheet which contains a list of 100's of different file paths (including file name).

For example (Quater 1 is the document name)
R:ManagementJohn2008SalesSectionAQuater1

I would like to remove the file name from the file path (I will then convert the file paths to hyperlinks which will open the folder the document is stored in but not the document itself.

For example
R:ManagementJohn2008SalesSectionA

View 9 Replies View Related

Separate File Name From File Path

Jun 12, 2008

I am trying to separate a filename from a filepath in Excel VBA 2003.

I am using the Application. GetOpenFilename command to get the user to select the correct file.
However, this also seems to record the filepath.

I am trying to separate the filename out of this so that each file( name) activates a different sub procedure.
I am storing the result of the getopenfilename as a Variant.

At the moment I am having to specify the full path in order to get each sub to run. This is fine for 1 user - but not for others as the files are stored in different locations for each user.

View 7 Replies View Related

Hiding Workbook While Showing UserForm

Jun 12, 2013

1. I'm looking for a better way to get a UserForm (frmParts) to show right from the start as soon as I open the workbook while hiding the application. I use the following when I initialize the application:

Code:
Application.Visible = False
frmParts.Show

2. Later on, I add some parts to my inventory, but if I don't make the application visible, it doesn't save the data. So, I have to make it visible and then hide it again. Is there a right way to accomplish the save without having to unhide/hide the application? This is the applicable code I used (ComboBoxes & TextBoxes involved):

Code:
'copy the data to the database
Application.Visible = True
Application.ScreenUpdating = False

With ws 'ws=Inventory

[Code] ..........

View 1 Replies View Related

UserForm Control Not Showing Fully

Oct 24, 2007

I have a workbook which when opened connects to an external datasource (excel file) and downloads a table of information. While this is happening I have a userform which shows which has a lable saying (connecting to datasource, please wait....). However, when I open the workbook, the userform shows but the labels do not show, the userform just appears white.

View 4 Replies View Related

Preventing Calculation Error Showing

Jan 30, 2007

Is there any way that the #N/A can be turned off or hidden and the cell left blank?

View 6 Replies View Related

Launching Windows Explorer Path Error

May 27, 2007

I am trying to launch windows explorer from within excel vba. The routine below is borrowed from another post on this site and modified for my purposes.

Sub LaunchWindowsExplorer()

Dim PID As Double
Dim strRootPath As String

Const strExpExe = "explorer.exe"
Const strArg = " " '" /e,/root, "

'// Change rootpath here
strRootPath = "J:MyDirectoryWilliams,Bob 7264" ..............

View 9 Replies View Related

MoveFolder. Run-time Error 76, Path Not Found

Jun 13, 2007

I am getting the following run time error when trying to use MoveFolder from the scripting runtime library:

run-time error ‘76’
path not found

The source and destination paths are picked up out of cells and I think the spaces in the name or the length of the path names may be causing the problem.

The source folder looks something like this (contains 50 characters):
K:Example123 Folder1AB CD ESubfold,XX abcdefgh

The destination folder looks something like this (contains 60 characters):
K:Example123 Folder1XX New123AB CD ESubfold,XX abcdefgh

The code is pretty basic:


Sub MoveFolder(Sourcepath As String, Destinationpath As String)
Dim FSO As Scripting.FileSystemObject

Set FSO = New Scripting.FileSystemObject

'some code here removes the trailing backslashes on the
'end of the pathnames

FSO.MoveFolder Sourcepath, Destinationpath
End Sub

I have double checked the source path name exists. I have also tried doing it manually with the path names being entered in as text but i keep getting the error.

View 9 Replies View Related

Get A File Path Using Vba

Jun 3, 2004

I'm using this code to import a file, but I want to be able to save just the path (with no file name) to a variable to use for the output file. This code saves the path and file.

FileName = Application. GetOpenFilename _
FileFilter:=Filt, FilterIndex:=FilterIndex, Title:=Title)

Any help would be greatly appreciated. I didn't know but what there was a function that I could apply to the 'FileName' variable that would remove the file name...don't know.

View 9 Replies View Related

Use The Path Of My File

Mar 23, 2005

how can I refere to the path whaere my addin is located without having to write it
i tried with this, but....................

Sub AddingAddIn()
Dim p
p = Application.Path
AddIns.Add Filename:=("path")
AddIns("HTML").Installed = True
End Sub

View 9 Replies View Related

Get Rid Of Path In File Name

Apr 26, 2007

How can I get the name of a workbook WITHOUT the path when I have the name WITH the path?

To be more specific. When I use "Application. GetOpenFilename" the result is a file name for say "my_book" including the path. With this I can open the file using "Workbooks.Open" and Excel will show me "my_book". But when I want to reference this workbook later on in say "Workbooks(my_book)", then I need the file name without the path. How can I get that one in VBA?

Till now I was using "CurDir" to find out the path after opening the file and just subtracted it from the full file name. This seamed to be fine. But now I had a situation where CurDir gave me a path with abbreviations (~),

View 9 Replies View Related

Showing Userform When Closing Previous Workbook

Dec 22, 2008

I have two workbooks (Book1 and Book2). When Book1 opens, its Workbook Open procedure displays a Userform1 that has two Command Buttons. The first Button closes Book1 (exit the program). The second Button opens Book2. Book2 has a Workbook Open procedure that should close Book1 and display a new Userform2. When the Workbook Open procedure of Book2 closes Book1, the procedure stops there and does not show the UserForm2. How can I get the Workbook Open procedure of Book2 to execute both steps of closing Book1 and showing Userform2? This must be done by clicking the second Button on Userform1.

View 9 Replies View Related

Modeless UserForm :: Loop Showing Progress Bar

Jul 10, 2009

On opening of my WorkBook I refresh my PivotTable and that takes a while so while its refreshing. So I want to launch a UserForm that basically have a loop showing progress bar similar than the Windows loading bar (i.e. a set of green vertical green bars moving in a black rectangle).

Here is the code in THisWorkbook:

View 9 Replies View Related

Enter Data In Cells While UserForm Showing

Oct 30, 2006

is it possible to enter data on a spredsheet while a form is opened or must the from be closed first. I thought I was smart to have a form remain open so users could change parameters but at the same time allow them to enter data in uprotected cells.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved