I have a set of values stored in an array an I simply want to populate the list box with these. one article on the microsoft website simply gave:
'Assign the array to the listbox
ListBox1.List = LArray
However, I get an object required error.
I've got a list box which I want to fill with a two column array, with items from a sheet based on a criteria selected by userform fired from another sheet.
Private Sub VariationsApprovedListMake()
Dim ws As Worksheet
Dim MyList(10, 2) As String
Dim M%, n%
Set ws = Worksheets("Variations")
LastRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(0, 0).Row
'Clear ListBox
lbVariationsApproved.Clear
'>
With lbVariationsApproved
.ColumnCount = 2
.ColumnWidths = "25;25"
.Width = 200
.Height = 100
End With.....................
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
Trying to load an array from user selected items in a listbox
My code returns Type Mismatch error
I don't know why as a I did not declare type for the array I thought treated as variant so should accept any values?
Debug:
arrSelected(intI) = .Selected(intI)
Private Sub btnOK_Click()
Dim arrSelected
Dim intI As Integer
With Me.lstAccounts
For intI = 0 To .ListCount - 1
If .Selected(intI) Then
arrSelected(intI) = .Selected(intI)
End If
Next intI
End With
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
I have 1 listbox (lisbox1) that retrieve it's list items from a worksheet range (imported/database query from access). This works fine.
I have a second listbox (listbox2) that should display results from clicking a value in listbox1.
Listbox1 contains companynames (1 column), listbox2 needs to be populated with quotes.
Range A3:D4800 contains company ID's, Company names, Quote Numbers. When I select a company name in listbox1, I need listbox2 to be populated with all quotes for that company.
I have tried (using vba) to do a vlookup using the listbox1 value, but I cannot seem to figure out how to populate listbox2 with "all" quotes. I get 1 quote and that's it. I realize I probably need to have the vlookup loop through each cell in the range to find the value, but when I try this, I get a type mismatch when using the .additem (only for the 2nd and subsequent passes).
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I have created a Userform with several 'Listsboxes'. I would like to populate these boxes from lists on a spreadsheet. Can someone please point me in the right direction using the 'VB Help' where I can get an example of the code
View 8 Replies View Relatedcode the following on a userform initialize event to populate a list box: If the selected item in the list box SerialNumber = "none" (lower or upper case) then populate the list box lbSamDesc with all the unique entries on the sheet "EquipmentData" in Column C (from C3 on to last entry in C), where the corresponding B cell next to it is blank.
View 14 Replies View RelatedI have a workbook with about 25 different sheets and each sheet has the same in cell listboxes on them and If I get another item I need to add to them I have to go to each sheet and update them, is there a way to make one list to populate each list from?
View 5 Replies View Relatedi have a simple listbox and i want to be able to assign text to it.
i thought the correct code was something like this:
listbox1.List(rw,col) = "value"
but i get a runtime 381 error. could not set the list property. invalid property array index.
i'm using row 1 is index 0 and column 1 is index 0.
how do you populate a listbox with multiple columns? .additem only populates column one for me.
I need to populate two listboxes, however, the value on the second box needs to derive from the first one, such as when I click on North America, USA and Canada would show up. the tricky part is that I need to be able to select North America and Europe in the same time and 2nd list box needs to show USA, Canada, UK, Italy, German accordingly.
A1: North America
A2: Europe
A3: Asia
B1: USA
B2: Canada
C1: UK
C2: Italy
C3: German
D1: China
D2: India
I am using Excel frontend and Access backend for my project. Now I want to write the code that will execute when the userform1 is loaded and populate data from Access table in to the 2 column listbox. I have written the following code but that doesn't work properly.
[Code] .....
I have a userform, a textbox and a listbox.
I want to populate the listbox dependant on the worksheet names, skipping the first 4 worksheets The texbox should highlite a value in the listbox (if exists).
I am trying to populate a listbox in a userform with only certain data. Currently I am able to populate all rows in a worksheet but I need to have only rows with the current date to show. In col A is the date and col B is a persons name.
View 3 Replies View RelatedIn my workbook i have worksheets that are named 01-Jan-2008,15-jan-2008,30-jan-2008...and i have almost 50 for each year.from 2007 to 2009. I have created a userform where i have a Year combobox with values 2007,2008,2009 and an ok button
then in the same form, i have a listbox and an Ok button and a back button.
i want the user to be able to pick the Year from the combobox. once he specifies the year, the worksheets corresponding to that year should appear in the listbox...instead of populating it with all the 100+ wksheets i want the search narrowed down.
Is possible to populate the headings of a listbox via code
I have a list box with three columns and need the headings to be
"Number" "Rider" and "Bike"
I am trying populate a listbox on a userform using the range of a4:a:30 from a sheet entitle names. I can do this singly using the additem command, but I am not sure how I can add a range, or if that is possible. this is my code so far:
Code:
Private Sub UserForm_Initialize()
With LBoNames
.AddItem Sheets("names").Range("a1").Value
End With
End Sub
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
I want to create a userform that selects a Staff members name from a combo box, once selected the listbox would then display what time off that person has taken - ultimately I would then like to be able to select a date taken and either edit or delete it from the sheet that holds the information.
View 7 Replies View RelatedI am trying to populate a listBox with data from cells. I eventually want to be able to make the cells change by just adding more data into my worksheet.
Here is my code. It should fill my listBox with just cells A1:A11 (I can't figure out how to make it adjust for new data), however the code is returning this error:
"Run-time error '91'
Object variable or With block variable not set"
Option Explicit
Sub PopulateListBox()
Dim myList As Worksheet
Dim x As Variant
For Each x In myList.Range("A1:A11")
UserForm3.ListBox1.AddItem x.Value
Next
UserForm3.Show
End Sub
Attempting to populate a listbox from a worksheet range at runtime As far as I can tell the code is correct But the listbox returns results from ws("Data") not from ws("WA")
Sub comp_bs_AnalyzeAccounts()
Dim wbBook As Workbook
Dim wsWA As Worksheet
Dim rngWA As Range
Dim lngRows As Long
Set wbBook = ThisWorkbook
Set wsWA = wbBook.Worksheets("WA")
comp_bs_XTract
lngRows = wsWA.Range("A65536").End(xlUp).Row
Set rngWA = wsWA.Range("A1:A" & lngRows).................
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
if is possible to make some kind of ComboBox without filters, I mean that let you choose different items at the same time. I do not know if some of you have seen some "ComboBox" that has all the options in one side and next to this window it has a blank window that when you double click the word that was in the other wondow passes to the other window telling you that you have chossen this item.
View 6 Replies View RelatedIs it possible to populate a userform multi column list box with data within a worksheet cell(s) that are underlined?
Ex Worksheet:
ABC
BlastingGLSubsidence
LISTBOX (only show the underlined cells)
Blasting
Subsidence
I have a big sheet and i want to create a mask where i can insert a value and in a ListBox appears all accurrences of this value and the other in the same row.
I created a listbox where, with the RowSource proprety show me LAST row where there is the value i want. Now i want a list of rows not continous in the sheet. For example i have this sheet:
A1 Jim B1 23 C1 1998
A2 Steve B2 27 C2 2010
A3 Francis B3 23 C3 1992
Now i want to search all people with 23. So i want in my ListBox appears:
A1 Jim B1 23 C1 1998
A3 Francis B3 23 C3 1992
I have a listbox1 which lists items from a rowsource, when i click on an item within the listbox i would like to call the value from another cell and populate into textbox1 on the same sheet1.
View 1 Replies View RelatedMy table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
Using the Roy Cox Database code http://www.excel-it.com/vba_examples.htm , I am trying to populate a user form when the user selects a list row. I don't know if this is important, but I have extended my list beyond 10 columns. The list appears in UserForm2, and it should populate UserForm1. UserForm1 is also available to fill in from scratch; the info pulled from UserForm2 is from a search.
Here is my problem:
UserForm1 does not populate with the current selection, but rather the previous selection. It will appear blank upon the first selection. If I close UserForm2 after getting a blank on Form1 and call UserForm1 from its own macro, I will also see that previous selection.
