Populate Data In 2 Column Listbox Using VBA
Jun 10, 2014
I am using Excel frontend and Access backend for my project. Now I want to write the code that will execute when the userform1 is loaded and populate data from Access table in to the 2 column listbox. I have written the following code but that doesn't work properly.
[Code] .....
View 2 Replies
ADVERTISEMENT
Mar 21, 2012
the following code has been devised to populate a userform listbox ("listbox1") with seven select columns (F,H,K,L,N,O) of filtered rows of a worksheet ("Data")
Code:
Sub AddMultipleColumn()
Dim rngCell As Range
Dim wks As Worksheet
[Code]...
Regrettably, there is something amuck that is preventing it from providing the expected results. Seems as though this code wishes to process all the rows, instead of just those revealed from the filter. The routine runs indefinately, and will ultimately lock up Excel and never revealing any information. On a random stop, rngCell value far exceeded the (what I felt) to be the preferred max of 28 ... the number of rows of the filter. This routine is called from within the userform's initialization code.
Question 1 ... those that are able to shed light on the flaw ...
Question 2 ... data starts on row 6 of ther database, with rows 1-5 being header. What needs to be done, if anything, to reflect this?
And question 3 ... if the worksheet "Data" were in a second workbook , would be as simple as changing this ... Set wks = workbooks("workbook2.xls").Worksheets("Data")
View 9 Replies
View Related
Oct 17, 2007
I am trying to go through each worksheet and if the worksheet name is Hematology then the header columns will be put into the listbox (ListBox1). The first row of the header is the parameter and the second is the units. Ideally I'd like column 1 to have the first headr row and column 2 to have the second header row. Once the listbox is completed, the user can select multiple columns by the header and those columns will be deleted. I have the ListStyle set to 1-fmListStyleOption and MultiSelect set to 1-fmMultiSelectMulti
The only thing I get when I run the rubroutine is a userform (Hematology), an empty listbox (ListBox1) and my two command buttons (Nothing to Delete and Remove Parameters).
Private Sub Hematology_initialize()
Dim Wrkst As Worksheet
Dim Header1 As Range
HeaderRange1 As String
For Each Wrkst In Worksheets
If Wrkst.Name = "Hematology" Then
For i = 1 To Wrkst.ColumnCount
Set Header1 = Wrkst.Cells(5, i)
HeaderRange1 = Header1.Address & ":" & Header1.Offset(1, LastColumn).Address
With Hematology.ListBox1
'Clear old ListBox RowSource
.RowSource = vbNullString
'Parse new one
.RowSource = HeaderRange
End With
Next i
End If
Next Wrkst
End Sub
View 9 Replies
View Related
Nov 14, 2012
I am trying populate a listbox on a userform using the range of a4:a:30 from a sheet entitle names. I can do this singly using the additem command, but I am not sure how I can add a range, or if that is possible. this is my code so far:
Code:
Private Sub UserForm_Initialize()
With LBoNames
.AddItem Sheets("names").Range("a1").Value
End With
End Sub
View 4 Replies
View Related
Jun 27, 2006
I am trying to populate a listbox with data that is of varied formats and I can't seem to do it! I can get the data into the listbox but not change the formats. I have attahed a worksheet to show the problem. Basically, column 2 of the listbox I want to be in hh:mm:ss.0 format and column 4 I want to be in dd-mm-yy. The strange thing is that the listbox does seem to take into account some formating as column 4 is in mm-dd-yy format already but column 2 is just a number.
View 4 Replies
View Related
Dec 31, 2013
I need to make a userform, my userform contains (1 textbox , 2 labels , 1 listbox , 2 buttons(clear & cancel))
I tried my best but I unable to make it perfect..
I need to populate data in listbox based on textbox change, below is my condition
Required column Headers in listbox is "Acno Nbr","investname","amount"
- textbox contains only number if user enter text then msgbox should show plz enter numbers only & as well as in lable
- our account nbr which we are enter in textbox that should be start from "9" if user enter number otherthan "9" , msg should show invalid number & as well as in lable
- if user entering the number & whatever the number user enter listbox should populate required data whatever the account nbr starting with that number(textbox value)
- suppose if user enter only lessthan 10 & greaterthan 10 then in lable show invalid number u have enter lenght of account nbr(textbox value)
- suppose if textbox value is available in worksheet then in listbox populate the required data and in lable populate "yes it's power goal number"
- suppose if textbox value is not available in worksheet then in lable show "no records found - might be its not a power goal number"
See attached file..
View 11 Replies
View Related
Jun 18, 2013
I am trying to populate a listbox in a userform using a dynamic list of data in column Y or worksheet "varhold".
Here is my code:
Code:
Private Sub Userform2_Initialize()
With UserForm2.listbox1
RowSource = ThisWorkbook.Sheets("varhold").Range("offset($y$1,0,0,counta($y:$y),1)")
.BoundColumn = 1
.ColumnHeads = False
.ColumnCount = 3
End With
End Sub
When I run this procedure, the box is blank. There is no list.
View 7 Replies
View Related
Jan 21, 2009
I have a userform with a multi select listbox and 7 textboxes and a sheet with all the data on called "Metdata"
See "Metadata" sheet data below:
I want to:
1. Populate the Listbox1 with the data from column A, which starting at cell A3 and down until cell/row is blank. In the example "Metadata" sheet below I only two rows are present but that will increase to 200+ rows.
listbox1 = data from column A starting A3.
2. When the user selects a single item in the listbox1, I want the 6 textboxes to be populated with the data from the other columns related to the row selected as follows:
textbox1 = column B - starting cell B3
textbox2 = column C - starting cell B3
textbox3 = column D - starting cell B3
textbox4 = column E - starting cell B3
textbox5 = column F - starting cell B3
textbox6 = column G - starting cell B3
Every time the user changes the item selected in the listbox1, I want the textboxes to be populated with the data from the corresponding row selected.
3. When the user selects more that one item from the listbox I want all the textboxes to be locked = true and textbox7 = "Multiple files Selected"
Obviously when a single selection is made from listbox1 that all textboxes are unlocked for use....
View 9 Replies
View Related
May 27, 2014
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
View 2 Replies
View Related
Sep 27, 2007
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
View 9 Replies
View Related
Jun 28, 2007
I have 1 listbox (lisbox1) that retrieve it's list items from a worksheet range (imported/database query from access). This works fine.
I have a second listbox (listbox2) that should display results from clicking a value in listbox1.
Listbox1 contains companynames (1 column), listbox2 needs to be populated with quotes.
Range A3:D4800 contains company ID's, Company names, Quote Numbers. When I select a company name in listbox1, I need listbox2 to be populated with all quotes for that company.
I have tried (using vba) to do a vlookup using the listbox1 value, but I cannot seem to figure out how to populate listbox2 with "all" quotes. I get 1 quote and that's it. I realize I probably need to have the vlookup loop through each cell in the range to find the value, but when I try this, I get a type mismatch when using the .additem (only for the 2nd and subsequent passes).
View 9 Replies
View Related
May 30, 2014
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
CodeCustomer's Cost
$34.10
$34.10
$34.10
$34.10
$34.10
$37.51
$37.51
$32.50
$32.50
$33.48
$33.48
$34.10
$37.51
$37.51
View 7 Replies
View Related
Jan 25, 2013
I'm looking to populate my Helper Column with all duplicates from my Data Column. Please note that my helper column needs all instances of a duplicate.
Data Column
Company ABC
Business DEF
Corporation GHI
Business DEF
Company ABC
Business DEF
Helper Column
Business DEF
Company ABC
Business DEF
The formula needs to be dynamic and it will need to be able to be copied down.
View 9 Replies
View Related
May 18, 2009
I have created a Userform with several 'Listsboxes'. I would like to populate these boxes from lists on a spreadsheet. Can someone please point me in the right direction using the 'VB Help' where I can get an example of the code
View 8 Replies
View Related
Mar 14, 2014
code the following on a userform initialize event to populate a list box: If the selected item in the list box SerialNumber = "none" (lower or upper case) then populate the list box lbSamDesc with all the unique entries on the sheet "EquipmentData" in Column C (from C3 on to last entry in C), where the corresponding B cell next to it is blank.
View 14 Replies
View Related
Oct 6, 2008
I have a workbook with about 25 different sheets and each sheet has the same in cell listboxes on them and If I get another item I need to add to them I have to go to each sheet and update them, is there a way to make one list to populate each list from?
View 5 Replies
View Related
Mar 21, 2008
i have a simple listbox and i want to be able to assign text to it.
i thought the correct code was something like this:
listbox1.List(rw,col) = "value"
but i get a runtime 381 error. could not set the list property. invalid property array index.
i'm using row 1 is index 0 and column 1 is index 0.
how do you populate a listbox with multiple columns? .additem only populates column one for me.
View 9 Replies
View Related
Jul 9, 2009
I've got a list box which I want to fill with a two column array, with items from a sheet based on a criteria selected by userform fired from another sheet.
Private Sub VariationsApprovedListMake()
Dim ws As Worksheet
Dim MyList(10, 2) As String
Dim M%, n%
Set ws = Worksheets("Variations")
LastRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(0, 0).Row
'Clear ListBox
lbVariationsApproved.Clear
'>
With lbVariationsApproved
.ColumnCount = 2
.ColumnWidths = "25;25"
.Width = 200
.Height = 100
End With.....................
View 9 Replies
View Related
Aug 2, 2006
I have a set of values stored in an array an I simply want to populate the list box with these. one article on the microsoft website simply gave:
'Assign the array to the listbox
ListBox1.List = LArray
However, I get an object required error.
View 5 Replies
View Related
Mar 20, 2008
I need to populate two listboxes, however, the value on the second box needs to derive from the first one, such as when I click on North America, USA and Canada would show up. the tricky part is that I need to be able to select North America and Europe in the same time and 2nd list box needs to show USA, Canada, UK, Italy, German accordingly.
A1: North America
A2: Europe
A3: Asia
B1: USA
B2: Canada
C1: UK
C2: Italy
C3: German
D1: China
D2: India
View 3 Replies
View Related
Jun 26, 2014
I have a userform, a textbox and a listbox.
I want to populate the listbox dependant on the worksheet names, skipping the first 4 worksheets The texbox should highlite a value in the listbox (if exists).
View 2 Replies
View Related
Feb 24, 2009
I am trying to populate a listbox in a userform with only certain data. Currently I am able to populate all rows in a worksheet but I need to have only rows with the current date to show. In col A is the date and col B is a persons name.
View 3 Replies
View Related
May 16, 2009
In my workbook i have worksheets that are named 01-Jan-2008,15-jan-2008,30-jan-2008...and i have almost 50 for each year.from 2007 to 2009. I have created a userform where i have a Year combobox with values 2007,2008,2009 and an ok button
then in the same form, i have a listbox and an Ok button and a back button.
i want the user to be able to pick the Year from the combobox. once he specifies the year, the worksheets corresponding to that year should appear in the listbox...instead of populating it with all the 100+ wksheets i want the search narrowed down.
View 2 Replies
View Related
Oct 13, 2009
Is possible to populate the headings of a listbox via code
I have a list box with three columns and need the headings to be
"Number" "Rider" and "Bike"
View 5 Replies
View Related
Nov 22, 2013
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
View 3 Replies
View Related
Jul 5, 2014
I want to create a userform that selects a Staff members name from a combo box, once selected the listbox would then display what time off that person has taken - ultimately I would then like to be able to select a date taken and either edit or delete it from the sheet that holds the information.
View 7 Replies
View Related
Jul 23, 2008
I am trying to populate a listBox with data from cells. I eventually want to be able to make the cells change by just adding more data into my worksheet.
Here is my code. It should fill my listBox with just cells A1:A11 (I can't figure out how to make it adjust for new data), however the code is returning this error:
"Run-time error '91'
Object variable or With block variable not set"
Option Explicit
Sub PopulateListBox()
Dim myList As Worksheet
Dim x As Variant
For Each x In myList.Range("A1:A11")
UserForm3.ListBox1.AddItem x.Value
Next
UserForm3.Show
End Sub
View 9 Replies
View Related
Aug 26, 2006
Attempting to populate a listbox from a worksheet range at runtime As far as I can tell the code is correct But the listbox returns results from ws("Data") not from ws("WA")
Sub comp_bs_AnalyzeAccounts()
Dim wbBook As Workbook
Dim wsWA As Worksheet
Dim rngWA As Range
Dim lngRows As Long
Set wbBook = ThisWorkbook
Set wsWA = wbBook.Worksheets("WA")
comp_bs_XTract
lngRows = wsWA.Range("A65536").End(xlUp).Row
Set rngWA = wsWA.Range("A1:A" & lngRows).................
View 6 Replies
View Related
Jan 25, 2007
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
View 9 Replies
View Related
Dec 18, 2007
if is possible to make some kind of ComboBox without filters, I mean that let you choose different items at the same time. I do not know if some of you have seen some "ComboBox" that has all the options in one side and next to this window it has a blank window that when you double click the word that was in the other wondow passes to the other window telling you that you have chossen this item.
View 6 Replies
View Related