I have only one macro created in my excel workbook which is printing rows between two rows that their references are given.
To print-preview the results only takes 2 minutes, although it is only one page because I don't have much data in the spreadsheet yet. Also, to print it takes another minute.
How can the macro run and display results in less time?
I have place a camera-picture of a table on the right side of a chart. On the screen it looks great! (See below - with some redaction)
Problem Example.png
.... but when I print it the table expands off of the side of the chart. Scale is 100%, zoom is 100%, Excel 2010 (See below - with some redaction). Whether or not I have a print area does not seem to make a different in the problem. Also, it appears that this happens with any shape I put in that place, it's not specific to the camera tool.
Problem Example_Print Preview.png
It takes a specific sheet & range, uses publish object to create a HTML version of this sheet then launches the IE browser to display this to the user.
Issue:
Under Windows XP, Excel 2003 & Excel 2007 this works OK. Under Vista & Excel 2007, the HTML preview file is not getting written - I get an error when IE browser tries to display this file. Error: Can not find "Print Preview.htm"
Anyone run into this on Vista? Is this a permissions issue with writing the html file? Not sure why this exact same code works under XP and not Vista.
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I am using TrueType Fonts.
I keep reading that this "Application.Dialogs(xlDialogPrint).Show" brings up the same dialog as File-> Print or Cntrl+P but it does not.
Instead I get this wrong.jpg
When I actually need this correct.jpg
How to get the second one?
I set up a passworded spreadsheet and saved it to my documents folder. I then copied it across to a network area I use to link to a company I work with. The file opens ok on the password but the page is completely white and I can see nothing at all! When I print preview the page I can see all my information but this doesn't help when I need to update it.
Not only that, the whole lot of excel spreadsheets I have both on my documents and the network area are doing the same thing! I've no idea how it's happened or what to do to retrieve the page view.
How do I turn them off? I go to print preview, then leave, and I have ugly lines all over the place showing where the end of the page is. My entire team can't figure it out. where I can turn this option on/off?
View 2 Replies View RelatedThis file contains the printing options of a larger userform. But I am having problems with the print preview crashing.
I'd click one of the printing options on the userform, this would bring up the print preview of that sheet.
And when I try to "test" its stability by going crazy on the view next/ previous page on preview, it'd crash. This is especially when I've got the screenupdating set to false.
Just wondering if anyone else can varify the crash/ suggest what maybe its cause?
I have some code that Im trying to get to look at the sheets in my workbook and then based on if there is data in a cell and/or cells then select that sheet. Heres what I got so far thats not working. I get an error of Next without for.
Code: ...
1. Uses PrintPreview to view the results centered horiztonally on the page with the worksheet name at the center top of the printout and my name in the lower-right corner of the printout.
2. Closes PrintPreview. Everything is fine, except the macro will NOT close PrintPreview! I don't know what I'm doing wrong.
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = "&F"
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = "Jennifer Large"
.LeftMargin = Application.InchesToPoints(0.75)
.RightMargin = Application.InchesToPoints(0.75)
.TopMargin = Application.InchesToPoints(1)
.BottomMargin = Application.InchesToPoints(1)
.HeaderMargin = Application.InchesToPoints(0.5).........................
Is it possible to have a (print)preview shown in a textbox in a userform?
A layout has been made in a worksheet and content is added to some cells through Userforms (textboxes and comboxes).
1 Userform contains a big textbox and a "SEND"-button.
What I would like is to have a preview of the worksheet inside that textbox before they click send.
During this whole proces, the Excel -Worksheet is not visible (to prevent changes being made to the program)!
I need to print a number of worksheets with an office logo at the top left corner of the sheet. While I have no problem with most of the sheets, a number of them keep resizing the logo to smaller dimensions once I get to the print preview page. I don't seem to be doing anything different for these sheets as they all follow the basic template. The only was to get the logo to print at the size I want is to make it larger that I actually need it.
View 2 Replies View RelatedI'm almost done with the VBA tool I programmed - only one task left.
I'm having a little trouble with the print preview.
It shall show the range
...FROM A1 '(first cell)
...TO I(j+1) '(Col: "I", row: "j+1")
The code I use looks lie this:
I created a macro that prints a label from a userform. The macro used to reside on an XP platform and performed without issues. IT decided they wanted to upgrade the machine to a Windows 7 platform. Now when the userform prints a small window pops up that looks like a print preview of the label, however it is transparent and has a window caption of 'Precut Label' as identified in the userform design. I am including a screenshot of the pop-up. The unusual thing about this is the window cannot be closed, moved or selected in any way shape or form. The only way to get it to close is to view the userform object in the vba editor. The line of code that triggers the print sequence as well as cause the pop-up is: frmLabel.PrintForm. This line of code is housed in the sheet1 object.
View 1 Replies View RelatedI am testing some code to have my sheets print consistently on different computers. I have
With ActiveSheet.PageSetup
.CenterHorizontally = True
.Orientation = xlPortrait
.FitToPagesWide = 1
End With
ActiveSheet.PrintPreview
but it still previews at more than 1 page wide. Any suggestions?
I have a UDF that is used to identify autofiltered columns. Everything works great unless I am using the UDF for a conditional formatting, and then I try to use Print Preview.
Here is the UDF I am using: ...
I want to hide some rows when I click on the Print Preview menu button.
View 4 Replies View RelatedI have a spreadsheet which needs to be scaled down when printing (to fit 1 page wide by x tall), everything looks good in the print preview, but when PDFing, some of the columns don't seem to wrap properly and some of the words on the right side blend into the next column.
After playing around with it, if I set the column to autofit it slightly expands the column width and works correctly. Unfortunately, this will make the text too small to read by the time it is scaled down for PDFing so I have left the columns as they were.
I had a feeling that this difference between what was on screen and the end result could be due to the "printer" settings. So, because the default printer was not Acrobat, I changed the printer to Acrobat before attempting to print preview and print again. Yippee, it worked.
macro is not exiting from print preview mode. Need the VBA code so it can close the print preview mode (preferably not "private sub" code)
View 2 Replies View RelatedWhen I view my page on print preview it shows 2 pages but I only have stuff on one page the second page shows 2 border marks but when I go to erase them I can't find them. Is there some way that I can find them other than look at page after blank page.
View 4 Replies View RelatedI have a spreadsheet with check boxes and a combo box that are set to display in print preview as well as print. I have set up a Print Preview button on this spreadsheet, as well. When you click the Print Preview button and then click close on the preview window and return to the spreadsheet, the control toolbox tools appear out of place and are greatly magnified. Scrolling the screen down and then back makes them appear correctly once again.
I have seen this on this spreadsheet on three different computers. Does anyone have a clue what is going on?
Note, clicking the print preview button on the standard toolbar does not provide the same artifact. It works correctly.
Or for the cheap fix, what is the VB script to move the cursor to a different cell and then return back?
I have checkboxes (from the control toolbox) in a spreadsheet next to text. When I am in the normal view everything is where it is supposed to be. But when I do a print preview the checkbox shifts and comes on top of the text that was at the left of the checkbox.
This form has to be presentable both on paper and electronically. So both views are important.
I have an Excel file that use an internal link from one worksheet to the next. When I click on the link, I'd like it to go directly to a print preview page so I can print that one page instead just switching to the other worksheet. Is this possible?
View 3 Replies View RelatedIs there a code I can put on commandbutton to show Print Preview on active sheet in excel 2010 ?
View 3 Replies View Relatedactivesheet.printpreview , Excel crashes if there are no printers installed on the machine. How can i check for printers before calling the printpreview, or else stop the program from crashing?
View 2 Replies View RelatedI have a print userform where I let the user print a summary package of sheets. I am trying to allow the user to see a print preview of certain sheets. The first one is always the "Bid Summary" sheet (sheet 2). The rest are a dynamic number of sheets with numeric names starting at 1. Now I need a easy way for me to allow the user to see a print preview of the Bid Summary, and then all the sheets right afterwards. I cant use sheets("1","2",...).select because it wont select a ever changing number of sheets. Really it is a problem of selecting a varied number of sheets in VB.
View 3 Replies View RelatedFirst I made some contents and drew a border from Home > Font > all Borders on an Excel 2010 file. So it became like below image (capture1). After that I wanted to print it so went to File > Print to see its preview. But the problem is that the lines between tue and wed and also between mon and tue are not shown neither in preview nor when printing. The height of row 7 until 17 is 24 (that is 32 pixel) but heights of the rest of the rows are normal (20 pixel).
View 7 Replies View RelatedI have added three lines above the existing data, and now the print preview doesn't work. Where the range is names as X18 I have added to bump everything down. I get an error in the SetActiveSheet.VPageBreak..... line. I'm sure the issue is with the range, but I'm just not sure what the issue is.
Here's the code:
ActiveWindow.View = xlPageBreakPreview
Dim i As Integer
With ActiveSheet.PageSetup
.PrintTitleRows = ""
.PrintTitleColumns = "$A:$Z"
[Code]....
I have a some code that we use in our office that works ok on my pc. When others in the office try to use the macro the year gets changed to 19 instead of 09. The only problem I have is that the code seems to slow down when it is trying to print the worksheet out. Can the code be shortened up/cleaned up. We are looking for gridlines with inside /outside lines, landscape and left/right margins of .25
Sub IC_Delays()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Workbooks.Add
Windows("Delays List.xls").Activate
Range("F15:N" & Cells(Rows.Count, "F").End(xlUp).Row).Copy
Windows("Book4").Activate
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats
Range("A1:I" & Cells(Rows.Count, "A").End(xlUp).Row).Select.........
I have created a code for printing specific charts on a "constant" page.
First of all the page is the same every time. It contains the same graph's (although with various data each time) and the same placement.
So when i make the page with graphs i also add a button with an attached macro.
This macro then shows an Userform where the user can decide which graph he would like to printout. I wan't specific headers and footers on the page, so the only thing i could make work is by copying the chart, and then place it in a new Chartsheet, then setting the header and footer and printing it out in the end. The code looks as follows:
Application. ScreenUpdating = False
On Error Resume Next
total = bruger + Varm + aar + varig 'the sub is called from another sub, so these are giving a value on beforehand
If bruger = 1 Then
'bruge pagesetup uden for chart object for at lave header og footer
Worksheets(sag).ChartObjects(1).Copy
Worksheets(sag).Paste
End If
Now everything works just fine, except it is really long time about doing this.
By testing i found out that the copying a chart takes alot of time in vba-code? Why is that? If i do it manually I don't have to wait for anything.
This is just a question of optimizing the code... Because i can't understand why it takes so long time with the VBA code!