Excel Camera Tool - Print Preview Different From Display On Screen
Nov 27, 2012
I have place a camera-picture of a table on the right side of a chart. On the screen it looks great! (See below - with some redaction)
Problem Example.png
.... but when I print it the table expands off of the side of the chart. Scale is 100%, zoom is 100%, Excel 2010 (See below - with some redaction). Whether or not I have a print area does not seem to make a different in the problem. Also, it appears that this happens with any shape I put in that place, it's not specific to the camera tool.
Problem Example_Print Preview.png
View 8 Replies
ADVERTISEMENT
Apr 20, 2014
I've have a tool/code that takes the screen prints of the active window (when I press F9) and pastes it in a word document.
But whenever I do copy some text or any other image and when I press F9 to take the screen print of the active window. I get the text pasted into the word, this is because the clipboard content has text first and then the screen print of the active window.
Instead When I press F9, I wanted the below to happen
1. Content from the Clipboard should be cleared
2. Take the screen print
3. Paste it in the word document.
Note: My tool/code already does 2 and 3. Looking for 1 alone, ,
View 4 Replies
View Related
Jun 18, 2013
In Excel 2010, I used the camera tool to take a snapshot of a selction of cells. How do I save the snapshot only as a JPG or GIF file?
I know that there are programs outside of Excel that can take snapshots or print screens, but I need to accomplish it using the camera tool so the snapshot is the exact selection everytime. Is the excel snapshot temporarily saved somewhere on my computer where I can access it?
View 1 Replies
View Related
Jun 10, 2008
I have only one macro created in my excel workbook which is printing rows between two rows that their references are given.
To print-preview the results only takes 2 minutes, although it is only one page because I don't have much data in the spreadsheet yet. Also, to print it takes another minute.
How can the macro run and display results in less time?
View 7 Replies
View Related
Jul 17, 2014
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I am using TrueType Fonts.
View 8 Replies
View Related
Jul 9, 2012
How to use the Camera Icon Tool using a Macro?
I want to copy the First Row which is the Column heading of one Sheet to a different Sheet
Example : From Col A till Col G First Row is to be copied as an Image. Normally I do it using the Camera Icon, however when I tried recording a Macro for the same it did not work..
So how do I that if I provide the Start Column and End Column Alphabet as a Variable is that possible.. I want this Image to not remain Volatile which is the case using the Camera Tool..
So, how do i get the picture of only the first row or any row and store it is an Image in a different sheet as static picture so that even when the sheet is moved to a different location it does not make a difference to the Image.
View 9 Replies
View Related
May 30, 2007
I'm having this problem where I used the camera tool to take a shot of some range of cells. After taking here on the worksheet the image looks fine but when I print preview the same image seems to be bigger than the actual image.
View 4 Replies
View Related
Dec 8, 2009
So what's so special about the Excel camera tool? To me, copy and paste do the same thing. What else can it do that Copy cannot?
View 9 Replies
View Related
Jul 17, 2013
I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
View 3 Replies
View Related
Mar 24, 2012
Description:The chart shown in the file is a picture using the Camera Tool. The real chart is in the worksheet "Chts". When using the dropdown & radio button, the chart is supposed to change accordingly.
Problem 1:The picture from the camera tool seem to be blurry. The lines also seem thicker. Any rectifications for this?
Problem 2:If I save this file as "xlsx", the chart will not change dynamically when the dropdown is changed.
2003 version
[URL]
2007 version
[URL]
View 6 Replies
View Related
Dec 29, 2009
I'm just looking to prevent users from using the print screen or the alt print screen buttons on the keyboard. I have this script that works if I use "39" (Right Arrow)but wont work if I use "42" (Print Screen Button).
View 5 Replies
View Related
Mar 24, 2013
Is there a code I can put on commandbutton to show Print Preview on active sheet in excel 2010 ?
View 3 Replies
View Related
May 24, 2014
First I made some contents and drew a border from Home > Font > all Borders on an Excel 2010 file. So it became like below image (capture1). After that I wanted to print it so went to File > Print to see its preview. But the problem is that the lines between tue and wed and also between mon and tue are not shown neither in preview nor when printing. The height of row 7 until 17 is 24 (that is 32 pixel) but heights of the rest of the rows are normal (20 pixel).
View 7 Replies
View Related
Mar 2, 2009
It takes a specific sheet & range, uses publish object to create a HTML version of this sheet then launches the IE browser to display this to the user.
Issue:
Under Windows XP, Excel 2003 & Excel 2007 this works OK. Under Vista & Excel 2007, the HTML preview file is not getting written - I get an error when IE browser tries to display this file. Error: Can not find "Print Preview.htm"
Anyone run into this on Vista? Is this a permissions issue with writing the html file? Not sure why this exact same code works under XP and not Vista.
View 3 Replies
View Related
Jun 27, 2014
I have a project report, which is user-configurable, allowing the user to customise the data that is displayed based on a number of parameters.
To ensure the report always prints neatly (the number of visible columns and rows varies, depending on the above parameters), so I have a macro that dynamically sets the print area of the worksheet.
At present, I call the macro from the workbook.beforeprint event, which works fine in terms of printing. Ideally however, I would like the macro to be called when CTRL+P is first pressed - i.e. the resulting 'print screen', containing a preview of the print out should reflect what will subsequently be printed, when the 'Print' button is then pressed.
I am not sure if this makes sense (Excel 2010 and 2013 are different from previous versions).
View 5 Replies
View Related
Apr 28, 2013
I keep reading that this "Application.Dialogs(xlDialogPrint).Show" brings up the same dialog as File-> Print or Cntrl+P but it does not.
Instead I get this wrong.jpg
When I actually need this correct.jpg
How to get the second one?
View 7 Replies
View Related
Nov 23, 2008
I set up a passworded spreadsheet and saved it to my documents folder. I then copied it across to a network area I use to link to a company I work with. The file opens ok on the password but the page is completely white and I can see nothing at all! When I print preview the page I can see all my information but this doesn't help when I need to update it.
Not only that, the whole lot of excel spreadsheets I have both on my documents and the network area are doing the same thing! I've no idea how it's happened or what to do to retrieve the page view.
View 2 Replies
View Related
May 27, 2009
How do I turn them off? I go to print preview, then leave, and I have ugly lines all over the place showing where the end of the page is. My entire team can't figure it out. where I can turn this option on/off?
View 2 Replies
View Related
Mar 11, 2009
This file contains the printing options of a larger userform. But I am having problems with the print preview crashing.
I'd click one of the printing options on the userform, this would bring up the print preview of that sheet.
And when I try to "test" its stability by going crazy on the view next/ previous page on preview, it'd crash. This is especially when I've got the screenupdating set to false.
Just wondering if anyone else can varify the crash/ suggest what maybe its cause?
View 9 Replies
View Related
May 17, 2008
I have some code that Im trying to get to look at the sheets in my workbook and then based on if there is data in a cell and/or cells then select that sheet. Heres what I got so far thats not working. I get an error of Next without for.
Code: ...
View 9 Replies
View Related
Jun 20, 2006
1. Uses PrintPreview to view the results centered horiztonally on the page with the worksheet name at the center top of the printout and my name in the lower-right corner of the printout.
2. Closes PrintPreview. Everything is fine, except the macro will NOT close PrintPreview! I don't know what I'm doing wrong.
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = "&F"
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = "Jennifer Large"
.LeftMargin = Application.InchesToPoints(0.75)
.RightMargin = Application.InchesToPoints(0.75)
.TopMargin = Application.InchesToPoints(1)
.BottomMargin = Application.InchesToPoints(1)
.HeaderMargin = Application.InchesToPoints(0.5).........................
View 3 Replies
View Related
Apr 3, 2008
Is it possible to have a (print)preview shown in a textbox in a userform?
A layout has been made in a worksheet and content is added to some cells through Userforms (textboxes and comboxes).
1 Userform contains a big textbox and a "SEND"-button.
What I would like is to have a preview of the worksheet inside that textbox before they click send.
During this whole proces, the Excel -Worksheet is not visible (to prevent changes being made to the program)!
View 9 Replies
View Related
Dec 10, 2012
I need to print a number of worksheets with an office logo at the top left corner of the sheet. While I have no problem with most of the sheets, a number of them keep resizing the logo to smaller dimensions once I get to the print preview page. I don't seem to be doing anything different for these sheets as they all follow the basic template. The only was to get the logo to print at the size I want is to make it larger that I actually need it.
View 2 Replies
View Related
Jul 21, 2009
I'm almost done with the VBA tool I programmed - only one task left.
I'm having a little trouble with the print preview.
It shall show the range
...FROM A1 '(first cell)
...TO I(j+1) '(Col: "I", row: "j+1")
The code I use looks lie this:
View 2 Replies
View Related
Jun 19, 2013
I created a macro that prints a label from a userform. The macro used to reside on an XP platform and performed without issues. IT decided they wanted to upgrade the machine to a Windows 7 platform. Now when the userform prints a small window pops up that looks like a print preview of the label, however it is transparent and has a window caption of 'Precut Label' as identified in the userform design. I am including a screenshot of the pop-up. The unusual thing about this is the window cannot be closed, moved or selected in any way shape or form. The only way to get it to close is to view the userform object in the vba editor. The line of code that triggers the print sequence as well as cause the pop-up is: frmLabel.PrintForm. This line of code is housed in the sheet1 object.
View 1 Replies
View Related
Apr 2, 2005
I am testing some code to have my sheets print consistently on different computers. I have
With ActiveSheet.PageSetup
.CenterHorizontally = True
.Orientation = xlPortrait
.FitToPagesWide = 1
End With
ActiveSheet.PrintPreview
but it still previews at more than 1 page wide. Any suggestions?
View 9 Replies
View Related
Sep 24, 2009
I have a UDF that is used to identify autofiltered columns. Everything works great unless I am using the UDF for a conditional formatting, and then I try to use Print Preview.
Here is the UDF I am using: ...
View 7 Replies
View Related
Nov 6, 2006
I want to hide some rows when I click on the Print Preview menu button.
View 4 Replies
View Related
Aug 15, 2007
I have a spreadsheet which needs to be scaled down when printing (to fit 1 page wide by x tall), everything looks good in the print preview, but when PDFing, some of the columns don't seem to wrap properly and some of the words on the right side blend into the next column.
After playing around with it, if I set the column to autofit it slightly expands the column width and works correctly. Unfortunately, this will make the text too small to read by the time it is scaled down for PDFing so I have left the columns as they were.
I had a feeling that this difference between what was on screen and the end result could be due to the "printer" settings. So, because the default printer was not Acrobat, I changed the printer to Acrobat before attempting to print preview and print again. Yippee, it worked.
View 4 Replies
View Related
Mar 23, 2009
macro is not exiting from print preview mode. Need the VBA code so it can close the print preview mode (preferably not "private sub" code)
View 2 Replies
View Related
