Excel 2007 :: VBA For Print Header For Multiple Sheets From One Source Sheet (but Not All)

Apr 18, 2013

I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.

I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.

For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:

#123456

789

I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.

View 3 Replies


ADVERTISEMENT

Excel 2007 :: Generate Multiple Workbooks With Worksheet Data Source

Jan 17, 2012

I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:

[IMG][/IMG]

This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3

and

Microsoft Excel 2007
Window 7Pro 64bit

This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......

How to put the information from the worksheet into specific position in the workbooks.

View 1 Replies View Related

Excel 2007 :: Merge Multiple Sheets Into One Workbook

May 1, 2012

I am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.

The sheets will be updated every 3 months and merged again (-thus replacing the old data).

View 2 Replies View Related

Excel 2007 :: Splitting Data Into Multiple Sheets

Apr 24, 2013

Writing code in VBA for splitting data into multiple sheets?

The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.

Following is the input sheet, the data needs to be split based on entry in the column "Job Type".

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair
04-Apr-13$20033456Contract Work10-Apr-13$40047896General23-Apr-13$100Input Sheet

Following tables are showing data split into multiple sheets and the sheet names are the same as entry under the column "Job Type"

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair04-Apr-13$200Repair

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount23456Contract Work10-Apr-13$400Contract Work

Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount27896General23-Apr-13$100General

View 9 Replies View Related

Excel 2007 :: Content Shown On Worksheet Different Than Print Preview And Print?

Jul 17, 2014

Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.

I am using TrueType Fonts.

View 8 Replies View Related

Excel 2007 :: Get Value From All Sheets In Same Cell Into Summary Sheet (in A List)?

Feb 20, 2014

How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.

And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007

View 14 Replies View Related

Excel 2007 :: Copy And Paste Pivot Table To Multiple Sheets?

Dec 14, 2013

for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.

Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.

I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw

View 5 Replies View Related

Excel 2007 :: Lookup One Value And Returning Multiple Values (Horizontally) With Two Sheets

Jul 31, 2014

I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:

1st sheet:

table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;

[Code]....

I have 180 rows of data like this one in the first sheet

Second sheet(named sheet 1) is not used for this

Third sheet(named sheet 2):

table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;

[Code]....

Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.

This formula should be in the column following "majoration".

I am using excel 2007 and windows 7.

View 3 Replies View Related

Macro To Print Sheets With Value In Cell A1 But Print Dynamic Ranges On Certain Sheet

Sep 24, 2013

I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.

So far this is what I have but the dynamic range part is not working:

VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer

[Code] ....

View 3 Replies View Related

Excel 2007 :: Possible To Have Formula In Header Or Footer?

Jul 18, 2012

Possible to have formula in Header or Footer in excel 2007?

I want to put concatenate formula. Eg. "=concatenate(weekending," ",'sheet1'!a1)"

View 1 Replies View Related

Excel 2007 :: Format Multiple Charts In One Sheet

Apr 21, 2014

I can run this code successfully:

Code:
With ActiveSheet.ChartObjects("Chart 2").Chart
.Axes(xlCategory).TickLabels.Font.Size = 20
End With

But this code throws a "This Object Is No Longer Valid" error when it gets to the first .Axes line:

Code:
Sub ChartFormat()
'
' Format Charts macro
'
Dim ch As ChartObject
For Each ch In ActiveWorkbook.Sheets("Summary").ChartObjects
With ch.Chart
.Axes(xlCategory).TickLabels.Font.Size = 16

[Code] .......

I'm using Excel 2007.

View 1 Replies View Related

Excel 2007 :: How To Protect Inserted Header Data

Dec 3, 2012

I'm using Excel 2007. I know how to protect specific cells within a worksheet, but I have not been able to find any information online pertaining to locking or protecting inserted header/footer data, even if I protect the worksheet.

I'm not concerned about setting specific VBA commands to ensure the header/footer prints, but rather preventing other users from being able to edit the data upon distribution of the worksheet.

View 3 Replies View Related

Excel 2007 :: Incorporate Cell Result In Header?

Jun 15, 2012

I'm trying to incorporate a Cell result in my header (the one you select from "Page Setup"). Is this possible? I would like to avoid macro if possible and prefer some type of formula.

Windows XP with Excel 2007

View 2 Replies View Related

Excel 2007 :: Consolidating Data From Multiple Lines Of Sheet

Jul 17, 2012

I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:

I have a table of data that looks like this:

SURNAME
NINO
CODE
NO OF UNITS

Smith
AB123456C
8AIA
1986.4805

[Code] .........

There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:

SURNAME
NINO
CODE
NO OF UNITS

Smith
AB123456C
8AIA
2278.4058

[Code] ...........

View 9 Replies View Related

Excel 2007 :: Match Data In Two Columns And Return Header

Apr 20, 2012

I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.

I'm using Excel 2007

The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)

The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .

It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1

View 2 Replies View Related

Excel 2007 :: Using INDEX And MATCH Function To Return Header Value

Mar 26, 2013

currently using Excel 2007 with Windows Vista.

I currently have a worksheet where I want to input a date (G2) and a rank value (H2) ranging from 1 to 4. The header value (B1:E1) corresponding to the date (A2:A4) and the rank (B2:B4) should be returned to I2 (currently returns #NA).

Using formula: =INDEX($B$1:$E$1,MATCH(H2,INDEX($B$2:$E$4,MATCH(G2,$A$2:$A$4),)))

which I found under: Find row, find value, then return column heading

However, the above formula does not seem to work with my date order or recurring data values of 1 to 4 over the 3 rows.

The worksheet layout is as follows:

Date

A

B
C
D

Date

Rank

Header

[code]....

The return value under Header should be C.

I have reversed the order of the dates and put sequential numbers in B2:B4 as plug variables and the above formula will return the correct Header value but I need the formula to work with the current date order and repeating rank values of 1 to 4 in B2:B4. Do not wish to use VBA.

View 2 Replies View Related

Excel 2007 :: Ignores Paper Source Selection

Nov 28, 2012

Pretty straightforward: randomly and infrequently, Excel ignores my selection of the rear tray paper source on my MX870 Canon. Able to correct issue only by closing out and re-opening Excel.

View 1 Replies View Related

Merging Multiple Excel Sheets Into One Sheet

Mar 31, 2011

I have a workbook with multiple sheets (21 sheets) in it. The header on each sheet begins at row B5. The actual data starts from row B6. The number of rows in each sheet varies and the last row contains the total for all columns that has numbers. I wish to have one sheet that combines data from all the 21 sheets. But;

1) The header should be repeated only once
2) Only the rows that has data should be included, blank rows should be ignored
3) I do not need the last row i.e. total to be considered while merging the sheets

I've given a snapshot of the data below. The first column contains the row number just for reference.

B5 Name Address Telephone Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar Total Other Members B6 Tony PQR Complex Road 1 12345678

300
500
800
B7 Stany PQR Complex Road 1 1234567890
1,000

[Code]...

[IMG]file:///C:/Users/DERICK%7E1.FER/AppData/Local/Temp/moz-screenshot.png[/IMG]

View 8 Replies View Related

Excel 2007 :: Date Format While Copying Data From Another Source?

Jul 14, 2013

I have some data coming in from another source system which has the date format as "DD-MM-YYYY" but while pasting it to Excel (2007) sheet some date fields has just DD-MM-YY format which disrupts my macro. I did changing the language settings to "English(UK)" ,which i wanted, and changed the same in Excel options as well. But unfortunately it doesn't work.

View 3 Replies View Related

Excel 2007 :: Summing Column On Data Sheet Based On Multiple Criteria

Feb 23, 2012

Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.

However, someone high up in management in my organization would like to "drill down" into the data behind the

SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)

If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.

At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.

View 2 Replies View Related

Excel 2007 :: Crashes When Trying To Update Data Source In Pivot Table

Sep 17, 2010

Excel 2007 crashing when trying to up date a data source within a pivot table?

View 3 Replies View Related

Excel 2007 :: Viewing SQL Statements Without Being Connected External Date Source

Jun 3, 2012

I now have XL 2007 but no longer work at the same place so do not have access to the external data source. I would like to view the SQL statements that I wrote back then but keep getting error that I am not connected to external data source and so cannot see my sql statements. I have MS Query 2007.

View 1 Replies View Related

Excel 2007 :: Find Source Data Range Of Pivot Table?

Feb 4, 2013

how to find the source data range of a pivot table (that already exists) in Excel 2007?

View 1 Replies View Related

Excel 2007 :: Textbox Control Source Linked To Cell In Spreadsheet?

Oct 10, 2013

I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .

View 2 Replies View Related

Excel 2007 :: Data Connection Between Two Workbooks Locks Source Workbook When Refreshed

Feb 10, 2012

[URL]....

I have 4 workbooks, all of them contain data that is managed by other teams at my company. I need to take all of this data, organize, and concatenate it into one sheet for myself, that I will then reference in other workbooks to various OTHER departments in our company that need the data for certain projects. I have the organization laid out in a lot of very complex formulas so that most of this is automated, and not manual.

I need a solution that can pull data from the 4 workbooks without locking them for use, to allow me to keep my document open all the time, and they can update theirs at their leisure. Everything works fine, until I hit the refresh button. Once this is hit, all of the linked documents are locked and cannot be opened, even in "Read Only" mode. Once I close the master document, the files are free to be opened. I know a workaround for now is that i can not "refresh" the document, but rather close and re open it for changes.

Some steps I have already tried :

1. Create an intermediary file that no one uses, and can be locked all day without a problem. This doesn't work for me since the intermediary file needs to be open to refresh, which locks the original source doc, leaving me in the same place as before.

2.Modify the connection string to display "Mode=Read;" instead of "Mode=Share Deny Read"

3.Create a new connection with "Read" only selected in the Advanced Tab

View 1 Replies View Related

Excel 2007 :: Source Date Sorting Into Format Used For Pivot Table / Chart?

Sep 24, 2011

I am stuck trying to sort data that looks like the following, into a format that I can use as source data for pivot tables/charts.

Excel2007ABCDEFGHIJK2MalayMalayMalayMalayMalayMalay
ChineseChinese3MaleFemaleFemaleMaleFemaleFemaleMaleMale
436-4536-4536-4525-3525-3525-3536-4536-455
DateArticleContentLapseCurrentCurrentCurrentLapseLapseCurrentCurrent612-SepRelieving 40 years - Oct 15, 1972
Thick Haze continues to blanket MalaysiaHistory42712-SepRelieving 40 years - May 5, 1972
All Sharifah wants is a pair of legsHistory1222812-SepA man and his agonyHistory3223912-SepA lesson on Sept 16History22Sheet2

I will need to group Data multiple ways. However, I cant work out a good way to sort it. Can I have a suggestion on layout that I will be able to arrange data appropriately.

View 2 Replies View Related

Excel Will Not Print More Than First 5 Sheets When Tell It To Print All Sheets?

Dec 1, 2013

I have a Document with multiple sheets in it and I ask it to print entire document which would be 7 sheets (1 Page printed per sheet) but only the first five will print, then it comes up with a second print queue that I need to use and OK to print the balance of them with. I'm printing To a PDF creation program. it saves and Prince the first 5 pages then asks for another new name of the document to save the next few pages. my PDF Creator works fantastic with any other program. I just need to know how to tell it to print as many sheets as I have to print without it doing that. so I can print all sheets in a single PDF document.

View 2 Replies View Related

Copying Data From Multiple Sheets To Single Sheet In New Excel File

Feb 6, 2012

I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.

Consolidation should be like

Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.

Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.

In All the sheets in Master file Data starts from Row 7 and column 2.

Data range varies row wise in each sheet but column length is fixed to 4.

View 9 Replies View Related

Excel Macro To Copy Data From One Sheet To Multiple Sheets Without Duplications

Feb 16, 2012

We have a company and need to automating workflow.

The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E

Date
Reference no.
Name
Employee ID
16-Feb-12
S/S/1

[Code] ........

We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.

View 2 Replies View Related

Macro - Generating Multiple Sheets Using A Template And Source Workbook

Mar 20, 2014

I am new to the VBA editing and I am missing some steps to get my files correctly generated and then ideally saved in PDF format in the same folder.

I have two files; one is an invoice template with the following fields:

Invoice Reference: Line 8 column D
Issue date: Line 9 column D
Client name: Line 11 column E&F
Client address: Line 12 column E&F
Product name: Line 16 column E&F
Product details: Line 18 column E&F
Production date: Line 20 column E&F
Delivery date: Line 22 column E&F
Units: Line 24 column E&F
Total Units: Line 26 column E&F
Total Invoiced: Line 30 column F

Each sheet in the "template" workbook should be named after the Invoice Reference.

Secondly I have the source file in which the data is organized as follows: (Both are in the same folder)

Invoice Reference: column A
Issue date: column B
Client name: column C
Client address: column D
Product name: F
Product details: column G
Production date: column H
Delivery date: column I
Units: column J
Total Units: column J
Total Invoiced: column E

One invoice needs to be created per line in the source workbook. I tried many times the macro recording without getting the correct outputs.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved