I have a spreadsheet with 28 visible tabs. When I select all tabs and print, I get 3 cover (or banner) pages...I like having the first banner page, but the other two are in the middle of my report. I assume excel is sending 3 print jobs and I'm not sure why.
I've seen a couple of posts regarding this issue when using VBA, but I'm not using VBA...just selecting all the sheets and sending a single print job, but get 3 banner pages.
I have a single page spreadsheet. I want to print multiple copies and have a unique invoice number on each page printed in cell O1. I don't want to just send it to the printer as individual print jobs. I would like to send it to print as a pdf in a single 100 page document or if not a pdf then just as a multiple page document.
For example first print run would start at number 1001 and last numbered page is 1101.
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies View RelatedUsing Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
View 2 Replies View RelatedI have a macro that cycles through several student ID numbers and prints a progress report for each one. It works great, but I would like to add an option to pick which printer to use at the beginning of the code. In other words, when I run the macro, the printer box opens and I can pick the printer. When I click okay to print, the macro continues.
View 4 Replies View RelatedIn my excel, i have 3 worksheets. On the first worksheet, i have 2 pages since i have 2 sections side by side. I can't stack the sections due to different column widths. I am trying to see if there is a macro to stack the 2 pages on the first worksheet as one pdf page, and then have worksheets 2 and 3 as pages 2 and 3 of the pdf.
View 1 Replies View RelatedI have a workbook that has multiple sheets for patients (each named with SSN) with all such sheets having identical structure. I have the VBA code below that prints all sheets. Each sheet will have 7 pages when printed. Is it possible to amend the code so that it prints page 1 and page 3 from each sheets only?
VB:
Sub PrintSpecificSheets()
Dim WS As Worksheet, mySheets()
Redim mySheets(0)
[Code]....
I have data range which have three sections identical in shape and size.
How should i set the page setup so that each section print on a separate page.
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies View RelatedWhat I have is a large number of sheets in a workbook (26 to be exact). Each of these sheets has one specific named range. The file itself is quite large so I would like to print these ranges to a single PDF file. I did my best to search for this topic in the forums and while I did find some macros that were close, there was some sort of piece of code missing. Also, will how I list the named ranges determine the order of how they will show up in the PDF File?
View 3 Replies View RelatedThis is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
I have a workbook that has a single sheet in it, in cell G2 I want to insert a page number where if I print of multiple copies on the first sheet it will say 1, the second 2, the third 3 and so on and so forth.
I have never written any codes for Excel.
There are 24 pages for printing and each one has different information on that sheet. From day to day some or all of the pages are needed. I would like the macro to look at each page and find a cell(different cell but same info on each page) and if the value of that cell is greater than 0 print that page. If not don't. I only need to calculate the "Bundle Tops" sheet. How do I write this. I am a beginner at the VBA code.
View 9 Replies View RelatedI have a color printer that is set to grayscale as a default. When I print my
excel workbook and select it to print in color in the print driver properties
the first page prints in color but the other pages print in black and white
even though the other pages are in color.
I have client sheets that need to be printed at the end of each month. Sometimes I need 1 sheet, sometimes more. I have a macro which pops up a userform in which I can select the client I want to print and the month. I would like to be able to have the macro determine how many pages need to be printed so I get all the pages and do not end up with any blank pages. Is this possible?
View 1 Replies View RelatedI'm looking to setup a macro that will print specific pages on the current worksheet. What pages will print in that same worksheet will be determined on the value of a specific cell.
Here is what I have that isn't working.
VB:
Sub Print_Specific_Pages()
'''''''''''''''''''''''''''''''''''''''''''''Prints only pages that contain data
''''''''''''''''''''''''''''''''''''''''''''
If Range("B3").Value = 0 Then
Worksheets.PrintOut from:=1, to:=1 'Prints page 1 when there is no data.
[Code] ......
I have an excel file of 154 pages. I want to print only pages 1,151 and 154. what i am doing is print pages one by one.first give the command to page i then 151 then 154. how can i give the command in one go so that it is printed the required pages only.
View 5 Replies View RelatedWhen I view my page on print preview it shows 2 pages but I only have stuff on one page the second page shows 2 border marks but when I go to erase them I can't find them. Is there some way that I can find them other than look at page after blank page.
View 4 Replies View RelatedI've set up a short bit of code to select the print area for several pages in a workbook, but have no idea how to get the code to "activate". I tried placing a command button on a page to activate the code, but for some reason it won't see or act upon any sheets outside the sheet the command button is on. Same goes for the "event" proceudres on pages (activate, change.selection, etc).
View 9 Replies View RelatedI need to have a macro or VB that prints a number of pages based on the value of a cell in the workbook.
Example:
A1 = 155
B1 would divide by 50, print 3 pages where B1 = 50 and then print the 4th page where B1 = 5.
I have a macro that copies my selected area on one workseet, for example B2:M120 on Sheet 1, over to A10 on sheet 2, then prints sheet 2 and then clears the data that was just added leaving sheet 2 as a "clean" template for next use.
Is it possible to add code to the print macro that would look at column G of my selected area and print all rows that had say "cat" in column G on one sheet, all rows with "dog" on another set of sheet 2's, and repeats until all rows of my original selection have been printed?
I thought maybe paste the whole selection then filter, hide unwanted rows, print, repeat but I can't figure out how to repeat and alternate what rows are hidden.
I'm open to any way of doing this, we currently do it by repeating the "select area" but as my real life use replaces "cat" and "dog" with a 9 digit number we are having issues with some rows getting skipped while others get doubled up.
I have a UserForm that I want to use as a “Print Selection Page” using check boxes to make selection or multiple selections of pages to print from different spreadsheets but same work book.
View 9 Replies View RelatedI'm using VBA code to select several worksheets at once, and print them. The code runs fine, but the result is multiple print jobs, not one job. This is OK when printing to the printer...but undesireable if you want to print to a pdf file, for example.
I've searched the site and found some references to this possibly being an excel problem. Is that true?
I've also checked the page setup setting to make sure that the print resolutions are all the same...that doesn't appear to be the problem either.
I am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I am using TrueType Fonts.
I just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
View 4 Replies View RelatedI am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
How do I change the print settings of individual pages within a worksheet. Specifically, I'd like my worksheet to print out 4 pages, the first as portrait and the remaining as landscape.
View 2 Replies View Related