i have a workbook , workbook A , workbook A has 5 command buttons with different names on them., i want a macro code , i have some data on workbook A as well , as soon as i click one of the command button suppose user click on B, data gets copied and gets pasted into the workbook B , which is in different folder .
View 1 Replies
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I'm working with 2 different sheets, sheet1 and sheet2.
I'll type in entry 1 to 4. 2 comboboxes, 2 cell values. then click on the command button1.
i'll pass over the values to sheet2 like this:
array(comboBox1.value, range("a2").value, comboBox2.value, range("a4").value
I was asked to check against the last time the user click on the command button.
if combobox1.value, range("a2").value, comBoBox2.value, range("a4").value MATCHES exactly the last entry in sheet2, it'll give a popup Box before it continues.
I have a UserForm with 2 command buttons.
The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.
I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.
I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
I am a very beginner in VBA Excel 2007
I have a textbox named textbox1, How should i write my command button code so that my textbox will display below message when button was clicked
Updates.
1 Dec Monday 10am @ abc swimming complex
Alibaba 12345678 Paid100.
Please arrange first lesson meet up with student.
-Microsoft
I created a UserForm in which the user inputs data and then press "OK" in order to save an output into a specific worksheet. Once the "OK" button clicked, the UserForm repeats itself with some textboxes in blank so that a new output can be generated.
I am trying to display in a Label of the UserForm the number of times the "OK" button is clicked BUT starting from one. In other words, before pressing "OK" the Label indicates "unit no1" and once the "OK" button is clicked it should go "unit no1 +1" and so on.
For that purpose, I am using the following code:
[Code] ......
The label displays Unit nº1 when starting (which is right). However when I click the OK button it still displays "unit nº1" and then it starts counting normally.
The thing is that it should display "unit nº2" from the 1st "OK" click.
I have a command button in my excel sheet, if I or my team person clicks on it, the same file has to go to my manager's mail ID from my or my team person's (who clicks) outlook.
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
I need to get the data from the sheet 1 added to the sheet 2 by clicking on the ADD DATA button in the sheet 1. The sheet 1 will be filled in multiple times like a form by the users, so once the data is added to the sheet 2 I would like sheet 1 to have no data filled in the column to the right. The data will be only filled in the right column, thus the left column should not be copied to the sheet 2.
View 1 Replies View RelatedUserform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
I am currently working on a script that will copy some data from one sheet to another, but I keep getting the following error message:
Run time error: Object required
at
Set uRng = .Range("F1", .Range("F" & .Rows.Count).End(xlUp))
What could be causing it?
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change()
Application.ScreenUpdating = False
If CboGroupSelect.Value = "" Then Exit Sub
Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control
Dim CmdAmend As Control, CmdConfirm As Control
Dim iNum As Integer
Dim TxtTop As Long
[code]....
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
I have a big list of costs for several properties, what i need to do is in a new sheet (1 for each property) show any costs for that property.
So my sheet looks something like
Property Name - Date - Amount - Detail
property a - 01.01.01 - 1000 - plumber
property b
property a
etc etc
The the output on the property sheet to be
Property A
Date - Amount - Detail
TOTAL
The main long list of costs some of the fields are pulled in as a data validation list (not sure if that makes a difference)
I had a thread a couple of days ago about copy data from sheet (PakkeIndtag) and paste to sheet (Data). Now i need to do the same with 14 other sheets and paste the data to same Data sheet as before without deleting the previous data, just continue down. I have tried copying the code and go about doing this but every time i run the code, I somehow loose my previous data.
test(1).xlsm
What I'm attempting to do is to take data from each worksheet in the workbook beginning at the third, and then copy it into the lastrow +1 of the "Sheetpaste" sheet.
I am getting an "object variable or with block variable not set" error at the
I am new to VBA. I have a macro that copies data from one sheet (DETAILS) to another sheet (MOVE), provided it meets the criteria that rows in column H of the source sheet (DETAILS) should have the value "dog". The value to be copied is the row of data 5 columns before the source (column H of sheet DETAILS). The macro isn't working (does not copy anything). There is no error.
Code:
Sub CopyDataFromOneSheetToAnother()
With Worksheets("DETAILS")
LastRow = .Cells(.Rows.Count, "H").End(xlUp).Row
End With
For Each c In Sheets("DETAILS").Range("H5:H" & LastRow)
[Code]...
I want to copy data from one sheet to another and have the following
it is initiated by a button on the sheet named front, goes to the sheet named Salescapture, copies the data into the sheet named Salesdata ....
I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies View RelatedI have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
How to copy datas or scores from one sheet to another by using Formulas & Functions.
I tried to attached excel file as an example, but it couldn't.
Let me explain briefly: The file contains 11 Sheets, the first 4 Sheets has students Continuous Assessment of various subjects (about 7 subjects) in 4 different classes.
What I want is, the formulas or functions to use on how to copy the total score in all subjects for each student in various classes (Primary 1A, Pri 1B, Pri 1C, Pri 1D) to Sheets (1st Term, 2nd Term, 3rd Term) as class summary.
And thirdly, the total scores, position, grade & average to also appear in the Result Sheets for each student of various classes (Result Sheet 1A, Result Sheet 1B, Result Sheet 1C, Result Sheet 1D).
I have an excel workbook with 2 sheets.For now, the first sheet is blank and the second sheet is a "standard" form we use at work.Now by doing this by hand, we have to change 4 individual cells, print it out, change the 4 cells again and so forth, which is tiring and time-consuming.Imagine having to do this ~90 times/day average.Here's the real question.
I want to be able to input my data on a sheet with this format:
ROW A: TEXT1
TEXT2
...
ROW B: DATA1
DATA2
...
ROW C: BLEH1
BLEH2
...
ROW D: BLAH1
BLAH2
...
Data is plain text, no formulas, no nothing.Plain simple text.What i want to do is, or at least i hope to, is as soon as i am done,i want excel to create a new Sheet with the name of the text input from row A (create a new sheet for every single data input though), copy the "standard" form from sheet2 and change the necessary cells provided from row b, row c and so forth.
So if my input is: NWS1790 XX-AAA RHO 155
I want it to create a new sheet with the name nws1790 by copying a pre-existing sheet but replacing certain cells with XX-AAA, RHO, 155.
I am looking out for a code where I can copy a block of data to the second sheet and adding the new block of data below the previous one.
The block of data ranges from E6 to K15. On a click of the command button the data gets copied to sheet2 starting from A2. It will be pasted in sheet2 from A2 to G11. When I click the command button with the new data it will be added from A12 to G21 after that A22 to G31 and so on It will keep on adding the block.
I'm making a Task list with assignments for each of my team members. Columns A & B describes the ID number of the task, Column C describes the Task itself, Columns D to J are hidden, Column K describes the author of the task.
Column L is the one that have the name (or names) of the person who is in charge of doing that task. What I need to do is to create a macro that searches the name of that person in Column L and once it finds it it will create another sheet with the name of that person. And add to that sheet the entire row of his task..
I am using the code below to export my data to a new workbook, it creates a new workbook and copies the data into it except not all of it, strangely it seems to truncate the text from some cells ..
View 6 Replies View RelatedI have 2 sheets and i have a date which is common in both
In sheet 1 I want to find a date in column A17:A23 (it will always be rows 17 to 23) and then copy column C, E, G
I then want to find the same date in Sheet 2 column A (The date could be on any row in Column A) and paste the value in column S, T,U
