Can a variable declared as an integer not be assigned to a textbox value?
If not what is the proper way to declare it.
Dim J As Integer
Dim K As Integer
Dim L As Integer
J = TextBox1.Value
K = TextBox2.Value
L=J+K
I have a number of textboxes into which I enter the surname of individuals ... at present the textboxes are set to store all names in Uppercase. Is there coding to return names beginning Mc... or Mac... ie McClOUD or MacDONALD, in the more recognized format. I am sure this has been included in the forum but could not find it in a search of the site.
View 4 Replies View RelatedI've set a validation within my userform to force the user to enter in a valid employee ID or a general kiosk #. The validation is working, but the setFocus line I have added to place the cursor back in the textbox in the event the value entered was incorrect isn't working. The cursor is moving on to the next textbox making the user have to re-click on the text box in order to correct the invalid entry.
Am I placing my setFocus line in the wrong place of the code? FYI - The second setFocus is working correctly. When the user enters 9999 it directs them to the IT Ticket number text box. Prior to me moving the textbox, the cursor would jump all other text boxes to allow the user to enter in a ticket number within the ticket number box after entering 9999 within the PERNR text box.
I just want to set a variable to a textbox object, but everything I try to do just trys to set the variable to the textbox text. Here's the
Dim tb As textbox
Set tb = userform.textbox3
I tried a couple variations, but it just keeps trying to set the textbox variable to whatever is input into the actual textbox.
I have created a userform with 3 textboxes and I want to return the values entered to variables for use in a procedure. I cannot figure out how to return the values.
Behind the command button I am unloading the form so that the calling procedure continues executing but my vars cannot see the controls.
I have tried making them public outside of the calling sub, but nothing. Can anyone point out to me what I'm doing wrong?
Users select a row number which then opens up a Userform. Comboboxes and Textboxes on this Userform are then populated with coloumn values (dependant on the row initially selected). If the row number was the same each time I could accomplish this by the following.
Private Sub TextBox1_Enter()
TextBox1.Value = Range("a1")
End Sub
but as its a variable I'm trying the following (which I think should work)
Private Sub TextBox1_Enter()
TextBox1.Value = Range("a" & edi & "")
End Sub
I think I need to declare the variable 'edi' as Public. If so where should this be? I've tried 'Genereal Declaration'
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Is there any way I can protect my sheets properly..? I know you can use Tools > Protection.. but I've found (and used, for good, not evil!) macros on the web that will crack these in seconds. Is there any way I can disable the 'Tools' menu so that other users can't load these password crackers?
View 9 Replies View RelatedIs there a way to filter my data with the combobox and have the listbox reference the filtered data directly?
I am populating a listbox from a rowsource, housed in a sheet in my workbook, the sheet in my workbook is populated from another sheet that is filtered by a combobox selection and pasted to the sheet with the rowsource range.
My listbox is a multiselect with 5 colums and columnheads, named ListBox42
The sheet with the data to be filtered is named Building Material
Building Material is filtered in column “M” with a color
With ComboBox24 selected name: Names “M1” which activates the color down the column for filtering.
The ComboBox24
Private Sub ComboBox24_Change()
Worksheets("BuildingMaterial").Range("M1").Value = ComboBox24.Value
Sheets("BuildingMaterial").Select
ActiveSheet.Range("$M$1:$M$4247").AutoFilter Field:=1, Criteria1:=RGB(0, _
176, 240), Operator:=xlFilterCellColor
Sheets("matfilter").Cells.ClearContents
Sheets("BuildingMaterial").Select
Range("B1:F4249").Copy
Sheets("matfilter").Select
Range("A1").Select
ActiveSheet.Paste
Sheets("BuildingMaterial").Select
ActiveSheet.Range("$M$1:$M$4247").AutoFilter Field:=1
Application.CutCopyMode = False
Sheets("matfilter").Select
ActiveWindow.ScrollWorkbookTabs Position:=xlFirst
Sheets("Tom").Select
End Sub
My RowSource is a defined name “=matfilter!$A$2:$E$4230 “
So I record a macro but it see only following bit
Range("A2").Select
Range(Selection, Selection.End(xlDown)).Select
I want this selection to be converted to numbers but in proper way (There is a green thing in corner in every cell and on top of column a yellow field with exclamation mark. When whole column is selected and you apply appropirate convert function from this exclamation mark menu it will convert it properly.
While if you just click on excel tab and choose numbers it just does not change it to numbers
I've had good success with the following line of code
Code:
Sheets("Test").Range("A2") = UCase(Sheets("Test").Range("A1"))
But how do I do the same, converting the to Proper Case?
I have just recently found that I can do case correction with Excel but I am manually having to do it how can I add it to my macro? The function for doing it does not seem straight forward to me on putting in macro I am sure it is simple but just missing some element of it.
I need to have Proper case for columns C, G and H from rows 11 and down.
how can i change the text put into an input box into proper case regardless of what my user puts in?
View 9 Replies View RelatedI found this bit of Worksheet_Change code to change the target area to UpperCase. This works fine.
If Not Intersect(Target, Columns(2)) Is Nothing Then
Set rng1 = Intersect(Target, Columns(2))
Set rng2 = Intersect(ActiveSheet.UsedRange, rng1)
For Each cell In rng2
If cell.Formula "" Then
cell.Formula = Format(cell.Formula, ">")
End If
Next cell
End If
I could not find anything telling me what the ">" means. I'm assuming that it is a special symbol/wildcard for UCase in VBA.
My question(s), is there a symbol for ProperCase so I can use the same code, just making it change the Target column to Proper? Also is there a list of the special symbols.
When I asked this question before, I was looking for a way to automate the exemptions on a UserForm. At that time I realized that automation was not a good choice and went with a CommandButton to turn off the Proper case for that entry. I am now trying to do the same thing on a Worksheet change event using this
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column < 1 Or Target.Column > 9 Then Exit Sub
On Error Goto Errhndl
Application.EnableEvents = False
If Target.Column = 1 Then Target.Value = Application.Proper(Target.Value)
If Target.Column = 2 Then Target.Value = Application.Proper(Target.Value)
If Target.Column = 3 Then Target.Value = UCase(Target.Value)
If Target.Column = 4 And Target.Value > "" Then Target.Value = UCase(Left(Target.Value, 2)) & "-" & Right(Target.Value, 2)
If Target.Column = 8 Then Target.Value = UCase(Target.Value)
If Target.Column = 9 Then Target.Value = UCase(Target.Value)
Application.EnableEvents = True
Exit Sub
Errhndl:
Application.EnableEvents = True
End Sub
My problem is with Target.Column = 1. I need a way to disable the proper case for a single row. I tried to use an additional column (J) and place a x in that row, but I could not figure out how to detect if there was anything in that column for the target row.
I've become stuck on a audit template I'm trying to develop and have spent a few hours to date trying to work it out by looking at forums and videos but with no joy. I've attached a sample template of my work to date
how I can remove a word value within a file so I can get an accurate average - so if the question has a N/A value, I want to remove it so that it doesn't pop up into the final equation when averaging. what the formula for this is? As you can see, both N/A and No give the same answer and have a '0' value when it comes to the summation. What I want is for the NA to not be accounted for and removed when it comes to average the Yes or No only fields.
The second issue is to do with the over all percentage compliance column and is similar to the above. I want this to track the overall percentage but from what I've done to date it works accounting for the NA still and I want this to be also not accounted for.
[Code] ....
U17 = 17
Sum($T$17:$T33) = 33
Result that I am seeking,
[Code] ....
I have been using following code to extract all upper case words in a string but the problem is I can not extract words which are proper. For example
This is GOOD
Present output: GOOD
Desired Output: This GOOD
[Code] ....
What can be suitable modification in this case?
I have an Excel 2003 worksheet with all the data in it in Upper-case.
I found this VBA code which works if you change a cell.
This is a followup to a post I had marked as solved, and it's really not. Below are two different Email routines I've tried, both based on macros by Ron DeBruin, neither of which fully satisfy my need.
One routine creates a copy of a spreadsheet and mails it. The problem with that is that my source spreadsheet has cells containing 255 characters or more, and Excel truncates the cells after 255 characters, so all of the data isn't going into the new spreadsheet.
The other creates a new spreadsheet, copies the data from my old spreadsheet, and pastes it into the new spreadsheet. Problem with that is the new spreadsheet doesn't have my footer or headers and isn't formatted to print correctly.
I need to either find a way to get past the 255 problem, or find a way to copy a properly set up spreadsheet and paste my data into it. My code is below: This one copies the spreadsheet and mails it
I have two columns:
Column "D" is a date field
Column "E" is a number field
I would like to Conditional Format the Dates in Column "D" to have a color fill:
If the value in column "E" is >99 and the Date in Column "D" is over 42 days before TODAY
=AND($E$3>99, $D$3
For some reason the end of teh formula will not display:
Convert to Proper UPPER Procedure ...
View 9 Replies View RelatedI want my users to be able to double click on a cell and based upon that cells address or range I want another sheet to be activated. Im currently trying to do something like this
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Cancel = True
If ActiveCell.Address = ("a10") Then Sheet2.Activate
End Sub
It does not matter to me what specific thing about the currently selected cell is used in the if then statement, but it cannot be the cells value as several cells have the same values. Am I on the right track and just bad syntax or am I way off base here?
Is it possible to modify this code to exclude the first sheet in the workbook which is called Costs?
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
''''''''''''''''''''''''''''''''''''''''''''
'Forces text to Proper case for the range A14:A39
''''''''''''''''''''''''''''''''''''''''''''
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("A14:A39")) Is Nothing Then
Application.EnableEvents = False
Target = StrConv(Target, vbProperCase)
Application.EnableEvents = True
End If
On Error Goto 0
End Sub
''''''''''''''''''''''''''''''''''''''''''''
'Forces text to Proper case for the range A14:A39
''''''''''''''''''''''''''''''''''''''''''''
I am using this macro to ensure that a range of cells appear in Proper Case. However I am encountering a drawback, sometimes I have text which I want in Upper Case but which is changed into Proper Case. I was wondering if there was a way to work around this. Example: Practical W/W appears as W/w or Woodturing (GMC) appears as Woodtrunign(gmc)
Private Sub Worksheet_Change(ByVal Target As Range)
''''''''''''''''''''''''''''''''''''''''''''
'Forces text to Proper case for the range A15:A40
''''''''''''''''''''''''''''''''''''''''''''
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("A15:A40")) Is Nothing Then
Application.EnableEvents = False
Target = StrConv(Target, vbProperCase)
Application.EnableEvents = True
End If
On Error Goto 0
End Sub
How can I extend proper() to NOT change "PO Box 333" to "Po Box 333". Ideally, I would like to supply a list of words such as PO and all the 2 letter directionals (NE,NW,SE,SW).
There are also cases such as a last name of MacNamara which should have a capital M and N. Even worse, I see that 3rd becomes 3Rd which is very sad.
I'm assuming the data was supplied in uppercase
I need to convert numeric data to proper dates. Example: a cell currently reads 100875 but I need it to display 10/08/1975.
I've already found a VBA script that properly formats new data as you enter it (keying 1298 results in 1/2/1998), and I'm familiar with using =DATE(left,mid,right) to coerce Excel into spitting out a date in a certain format.
The difficulty I'm having is that I need to make existing data display correctly, without adding another column to accommodate reinterpretation of said existing data through a formula. Essentially I'm looking to avoid having to re-key several thousand date entries.
I have huge data
I Want data to be transpose in a below format:-
Emp Code Emp Name Intime Outtime Total worked minutes Extra worked minutes Attendance Shift
And also add the row as per the number of days worked.
VBA code to transpose large number of data.
macro that will change the case of a string of texts to proper except for prepositions (e.g. and, or, about, the, etc.).
View 2 Replies View Relatedwhat I am doing is running a parameter query. Based on the users selection it pulls in and embeds a pdf file based on a link put into cell A1. The problem is when the user selects another file. My current process deletes all of the oleobjects on the page (because I couldnt figure out how to just delete this pdf embedded object as it is named differently each time it is pulled in) My current process worked fine up until I needed to add some controls (radio buttons) now when it loads the next file it deletes the radio buttons. Is there a way to name this embedded pdf file so that I can then delete only that object? or is there a fundamental better way to handle this?
below is the section in question
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim KeyCells As Range
Set KeyCells = Range("A1")
If Not Application.Intersect(KeyCells, Range(Target.Address)) _
Is Nothing Then
Dim wsh As Worksheet
For Each wsh In ActiveWorkbook.Worksheets
wsh.OLEObjects.Delete
Next wsh
ActiveCell.Offset(0, 0).Range("j1").Select
ActiveSheet.OLEObjects.Add(Filename:=Range("a1").Value, Link:= _
False, DisplayAsIcon:=False).Select