Set Focus Not Redirecting Cursor To Proper Textbox
Jun 18, 2014
I've set a validation within my userform to force the user to enter in a valid employee ID or a general kiosk #. The validation is working, but the setFocus line I have added to place the cursor back in the textbox in the event the value entered was incorrect isn't working. The cursor is moving on to the next textbox making the user have to re-click on the text box in order to correct the invalid entry.
Am I placing my setFocus line in the wrong place of the code? FYI - The second setFocus is working correctly. When the user enters 9999 it directs them to the IT Ticket number text box. Prior to me moving the textbox, the cursor would jump all other text boxes to allow the user to enter in a ticket number within the ticket number box after entering 9999 within the PERNR text box.
I'm having some trouble setting up my Userform. It's used for someone to insert a password to open up some sheets. I have it working except for 2 problems.
First off it gets started by a sub which has a shortcut key, CTRL + W.
When it opens I would like the TextBox to be ready to be typed on... and I would like the submit button ready for Enter. So when it opens, you just type in the password really quick and press enter without using the mouse at all.
The TextBox starts on the first try, but when I press cancel and then open the UserForm up again, then the cancel command is still selected and I have to select on the textbox.
There is 3 things on this userform... TextBox1, CommandButton1, CommandButton2. All I want is for the TextBox always to show up ready for typing, and the Submit(CommandButton1) to always be ready to press enter.
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
I have a number of textboxes into which I enter the surname of individuals ... at present the textboxes are set to store all names in Uppercase. Is there coding to return names beginning Mc... or Mac... ie McClOUD or MacDONALD, in the more recognized format. I am sure this has been included in the forum but could not find it in a search of the site.
I am using the following code to validate text entry in Textbox1 of a userform. I want that if the user enters a numeric value than a msgbox should popup and then cursor should get focus on Textbox1. But with this code, it is setting focus on textbox2 and not on textbox1.
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean) If IsNumeric(TextBox1.Text) Then MsgBox "Please enter TEXT value only.", vbInformation + vbOKOnly TextBox1.SetFocus End Sub
On the summary page click on 'Enter Sale' and notice that Customer Advisor' text box gets the focus and the cursor is flashing. (Which is what I want). Enter any name and a sale value (say 'A' and '1') and click the 'OK' button But when I tried to enter another sale the OK button still had the focus. So in the VBA Project / Forms / frm_sale / OK Click event - near the bottom I added a set focus before the 'frm_sale.hide' - This removed the focus from the 'OK' box - but the cursor is still not in the text box, and it needs to be clicked in order to enter text. This is clearly something trivial I am missing - but the blinkers are on and I cant spot it
I have SS that I have 3 levels of users using/viewing data and at the moment it does not allow for errors when inputing password & sheet number to access. What I need is that if there is an error in password or sheetnumber ths user gets the choice to re-enter correct data with vbYesNo or similar. The problem I have is with these lines of code not getting the focus back to txtSheet to re-enter correct data (>0 & <13).
Private Sub CommandButton1_Click() Dim shtNo As Integer Dim R 'Response to msgbox Dim rS As String Dim Msg, Style, Title, Help, Ctxt, Response, MyString Msg = "Please enter a number 1-12." ' Define message. Style = vbYesNo ' Define buttons. Title = "Choose Month" ' Define title. rS = Range("Scode").Value 'Staff password Application. ScreenUpdating = False If Not (txtSheet.Value > 0 And txtSheet.Value < 13) Then Response = MsgBox(Msg, Style, Title).....................
I am creating an Add Contact form. There is a checkbox for Individual (if left unticked then contact is a business entity - not an individual).
If Individual = True and If the txtNameFirst control has no value in it Then after the end user tabs away from the txtNameLastRegistered, the form should SetFocus on the txtNameFirst textbox (entry for this field is mandatory only if the contact is an individual - otherwise this field is made invisible)
But it is not working. I tick chkIndividual, I enter a name in txtNameLastRegistered, I tab away, code is called from txtNameLastRegistered_AfterUpdate (which includes the SetFocus code) but the form appears without focus in any of the controls!
I'm creating a userform for editing membership records of a small organisation. So I want the focus to default to textbox tboxFind which is used for searching the data.
I've put tboxFind first in the tab order, and in subroutine Userform_Initialize, the last line is tboxFind.SetFocus
Using Excel2000 on Windows Vista, it works OK.
Opening the same workbook in Excel2000 on WinXP, no textbox has the focus when the form opens, but once the user has started to use the form, the focus defaults back to tboxFind, as it should.
So why is the focus not where it should be when the form opens in WinXP?
I am trying to SetFocus on a single textbox in a simple form. I am not sure if I am doing it right.
Private Sub UserForm_Initialize()
' On Error Resume Next
' Dim rheadings, cl As Range ' ' Set rheadings = Worksheets("CONTACT").Range("A1:F1") ' For Each cl In rheadings ' Me.cbxSearchWhere.AddItem cl.Value ' Next cl
With Me tbxSearchCrit.SetFocus End With End Sub
Kind regards, Mentor Auto Merged Post Until 24 Hrs Passes;Hi: I answered my own query - just commented out the setfocus instruction and it defaults to the first, and only, textbox by default
To accomplish whats in the title, I tried (and think I used successfully previously) the following
With tbfind .SelStart = 0 .SelLength = Len(.Value) .SetFocus End With
Some details, i have a userform named Findform, a textbox in it named tbFind, and the above code is in the userform initialization event section.
Oh also, I dont get any error, everything runs just fine, its just the cursor is not inside the textbox waiting for typing in it. (but i do think it is the focus, when i press tab it goes to the next one in the tab order)
When the workbook opens, sheet 1 is selected. There is an activex textbox on sheet 1 that should receive focus.
using "textbox1.setfocus" or textbox1.activate" does not accomplish what I need. I have also applied this the setfocus and activate to the worksheet open event but without success.
VB:
Private Sub workbook_open() Worksheets("regular sku").Select TextBox1.SetFocus Worksheets("regular sku").ScrollArea = "I1:T36" End Sub
As part of a UserForm I am Validating and Formatting in one pass. The problem I'm having is that when the Validation fails, I get the error message, and the focus moves on to the next text box.
I want to trap the user in a loop until they have acceptable data
I have a choice of 9 command buttons on a form that enter a short string of text into a textbox. Each button enters a different string into the textbox. The string is the prefix to a product serial number. Once the user has clicked the button & entered his preferred prefix I would like the cursor to be flashing after the last character ready for the user to manually type in the remainder of the product serial number. I'm guessing (with my limited ability) that I have to create a function to do this & then call the function when the button is clicked ?
how to get rid of the blinking cursor in a text box. I made a splash screen, added a text box, increased the font size to maximum, and when I run it there is a maximum sized blinking cursor at the end of the line of text. Just looks bad on the splash screen. Is there a hide cursor command that I can use? Or is there a better way to add text that I (obviously) didn't use?
how to redirect the Hyperlink Dialog window to a another folder.
Referring to the attached .jpg the 'Look in:' combobox points to the same folder as where the excel file resides. I would like this dialog box to open up with the PDF Drawings folder.
I have tried with the following code (and it shows the address in the 'Address' combo) but does not work.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Is there any way I can protect my sheets properly..? I know you can use Tools > Protection.. but I've found (and used, for good, not evil!) macros on the web that will crack these in seconds. Is there any way I can disable the 'Tools' menu so that other users can't load these password crackers?
Is there a way to filter my data with the combobox and have the listbox reference the filtered data directly?
I am populating a listbox from a rowsource, housed in a sheet in my workbook, the sheet in my workbook is populated from another sheet that is filtered by a combobox selection and pasted to the sheet with the rowsource range.
My listbox is a multiselect with 5 colums and columnheads, named ListBox42
The sheet with the data to be filtered is named Building Material
Building Material is filtered in column “M” with a color
With ComboBox24 selected name: Names “M1” which activates the color down the column for filtering.
I want this selection to be converted to numbers but in proper way (There is a green thing in corner in every cell and on top of column a yellow field with exclamation mark. When whole column is selected and you apply appropirate convert function from this exclamation mark menu it will convert it properly.
While if you just click on excel tab and choose numbers it just does not change it to numbers
I have just recently found that I can do case correction with Excel but I am manually having to do it how can I add it to my macro? The function for doing it does not seem straight forward to me on putting in macro I am sure it is simple but just missing some element of it.
I need to have Proper case for columns C, G and H from rows 11 and down.
I found this bit of Worksheet_Change code to change the target area to UpperCase. This works fine.
If Not Intersect(Target, Columns(2)) Is Nothing Then Set rng1 = Intersect(Target, Columns(2)) Set rng2 = Intersect(ActiveSheet.UsedRange, rng1) For Each cell In rng2 If cell.Formula "" Then cell.Formula = Format(cell.Formula, ">") End If Next cell End If I could not find anything telling me what the ">" means. I'm assuming that it is a special symbol/wildcard for UCase in VBA.
My question(s), is there a symbol for ProperCase so I can use the same code, just making it change the Target column to Proper? Also is there a list of the special symbols.
When I asked this question before, I was looking for a way to automate the exemptions on a UserForm. At that time I realized that automation was not a good choice and went with a CommandButton to turn off the Proper case for that entry. I am now trying to do the same thing on a Worksheet change event using this
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub If Target.Column < 1 Or Target.Column > 9 Then Exit Sub On Error Goto Errhndl Application.EnableEvents = False If Target.Column = 1 Then Target.Value = Application.Proper(Target.Value) If Target.Column = 2 Then Target.Value = Application.Proper(Target.Value) If Target.Column = 3 Then Target.Value = UCase(Target.Value) If Target.Column = 4 And Target.Value > "" Then Target.Value = UCase(Left(Target.Value, 2)) & "-" & Right(Target.Value, 2) If Target.Column = 8 Then Target.Value = UCase(Target.Value) If Target.Column = 9 Then Target.Value = UCase(Target.Value) Application.EnableEvents = True Exit Sub Errhndl: Application.EnableEvents = True End Sub
My problem is with Target.Column = 1. I need a way to disable the proper case for a single row. I tried to use an additional column (J) and place a x in that row, but I could not figure out how to detect if there was anything in that column for the target row.