I have my spreadsheet protected and all the neccessary fields locked/unlocked, but one of the columns contains data validation. How can I prevent a user from copying and pasting a value into the data validation cell versus of course the intended purpose of picking from the list?
View 9 RepliesI have my spreadsheet protected and all the neccessary fields locked/unlocked, but one of the columns contains data validation. How can I prevent a user from copying and pasting a value into the data validation cell versus of course the intended purpose of picking from the list?
View 9 Replies View Related1- If I wish to write in the cell I can do it ?
2- When I do not wish to write in the cell I can do it (Its meaning protect the cell.)
create macro in order to protect Data Validation rules.
e.g. If user copy and paste cells from others source which is not in the same validation criteria or not contain any validation rules, the existing validation will gone.
so, is there any macro which will be able to automatically run to prevent the data validation?
I have a sheet that is password protected. I have this code attached to a command button. It will unlock the worksheet, autofilter it, print it, unfilter it, and password protect the sheet again. However it is protecting it without a password. I need to have it protected with the password so that someone will not be able to just go to tools to unprotect the sheet.
Private Sub CommandButton1_Click()
ActiveSheet.Unprotect "rainforest"
Columns("O:O").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:=">0", Operator:=xlAnd
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1
Selection.AutoFilter
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowSorting:=True, AllowFiltering:=True
End Sub
I would like to impose data validation on Sheet1 row A. I have a list of values in Sheet2 row A. Is their an easy way to do this?
View 3 Replies View RelatedHow I can put a List on a separate workSHEET and refer to this worksheet when inserting a data validation list on my main worksheet?
View 4 Replies View RelatedI have a competition entry form for an association I belong to that I'd like to add two drop down menus to so that entrants can select their club name and associated team names for that club.
In a worksheet behind the form I have a list of clubs in column "B" ("A" has the ID number in it as the table is from Access - don't ask!!) and the names of teams associated with that club going across the sheet beside the club name in individual Name Ranges. (Up to 30 Team names in Dynamic lists
=OFFSET(TeamsTest!$C$2,0,0,COUNTA(TeamsTest!$C$3+TeamsTest!$C$3:$AZ$3),1) )
On the form I have managed to make the first drop down so the club can select its name from a list by using Data Validation and referring to the Range Name (ClubLink - =OFFSET(TeamsTest!$B$2,0,0,COUNTA(TeamsTest!$B$2:$B$200),1)).
I have tried using an INDIRECT command to create a second drop down which will display only the team names associated with the Club selected in the first drop down, but can't get it to do anything - no drop down appears when you click on the drop down arrow at the side of the cell
The data Validation for the Team Name drop down is =INDIRECT(SUBSTITUTE($C$12," ","")) where C12 is the Club Name cell.
Why I can't get the Team Name cell to show the names listed beside the Club selected in C12?
I'm using data validation to create a drop down list ina spreadsheet so that users can select from a pre-defined list. I want to be able to maintain this list in a separate worksheet, but when I try to create the list it tells me that "You may not use references to other worksheets or workbooks for Data Validation Criteria". I don't want to maintain the list in the same worksheet as there's a risk of deletion. Is there a way to create a dropdown list in a second worksheet?
View 5 Replies View RelatedSituation: I have an Excel file with multiple worksheets. Each of these worksheets contain the same rules for data validation in a certain column (G).
Problem: If I want to add an item to the data validation lists I have to edit every single worksheet. I've tried making a seperate worksheet containing data validation items and using that as the source for the data validation rule, but Excel doesn't allow me to switch worksheets while defining the source.
In other words, I want to manage my data validation rules of multiple columns in multiple worksheets in one central location.
Is there a way to have a user on sheet1 pick from a pull down of a data validation on sheet2? I have important information that is linked to only sheet2 within a data validation. I want to be able to reference it in sheet1 to have the user pick, then it toggles them on sheet2. Is this possible?
View 2 Replies View RelatedI have a spreadsheet in Excel 2003 with many sheets all of which need to have for some columns the data entry restricted to a specific list.
To do this we have created lists defined and held in a separate sheet and then attempted to reference these from all the other sheets using Data -> Validation and then entering the relevant list in the Validation criteria.
The 1st sheet we set the Data Validation up in all is fine. The 2nd sheet however I get an error pop-up stating 'You may not use references to other worksheets or workbooks for Data Validation criteria'.
I am running into an odd issue and hope someone might be able to shed some light.
I have created several lists on one sheet in a workbook and have assigned named ranges to each individual list. So far, so good.
On various other worksheets, I have created Data Validation rules to allow users to select the relevant data from drop-down lists. (using formulas such as =List1, =List2, etc. in the Source box to capture the named ranges I had created).
Everything works perfectly...EXCEPT for one worksheet, which continues to give me the error message, "You may not use references to other worksheets or workbooks for Data Validation criteria." Can anyone explain why this error would only occur on one worksheet and work fine for all the other sheets? I'm perplexed!
I have a Data Validation list in cell A1 of a worksheet called LIST. I would like to modify the macro that I have recorded, the macro uses data from various worksheets. I would like to sort out some code so that at certain points in the macro it will select the worksheet that is shown in cell A1 of the LIST sheet and then carry out the code already recorded. THis will allow me to quickly change a sheet name that is refererred to in the macro numerous times without actually manually editing the sheet name in the macro code.
View 7 Replies View RelatedI have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.
View 3 Replies View RelatedI have a bit of code that calls a formatting sub depending on which cell is modified. It is triggered by the Worksheet_Change event, determines which cell is modified, and either calls the formatting sub or doesn't based on the location of the modified cell.
Some of the columns in the sheet have data validation with drop downs. If I select a value from the drop down, it doesn't trigger the Worksheet_Change. If I type a value into the same cell, it does.
This was apparently an issue in Excel '97, but supposedly fixed in '03?
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View Relatedhow to protect a worksheet from changes so that I am still able to change one cell on the worksheet but not any other cells.
View 2 Replies View RelatedHow can I get my workbook to automatically re-protect a single worksheet in a workbook at the save-then-close point? It doesn't need to be password protected.
View 5 Replies View RelatedI found this link in numerous places on this forum to email just a single worksheet from a workbook using one macro.
HTML Code: ....
the user is prompted with a password inputbox to both protect and unprotect my worksheet named: Data. I am using Excel 2003.
View 3 Replies View RelatedI had the thought that maybe it would be possible to have a worksheet that is not protected when saved but when it is opened there would be a sub-routine under Sub_Workbook Open that would step through each sheet and assign a random password. And when the workbook is saved it is saved without passwords again.
In this way there would be nothing for a password cracker to pick at. The only flaw I see would be that the password to open the VBA module would need to be static and this would open up the programming to change and remove. But wouldn't this be effective against most users who would only know about the utilities to open the passwords and not the programming behind excel.
Is it possible to protect a hidden worksheet. I do not want them to be able to unhide the sheet unless they know a password to do so.
View 9 Replies View RelatedI am trying to use protection in order to prevent users from only inserting a row or a column, sort, and autofilter. I don't think Userform is a good choice for this situation. I've tried using the following
Sub MyMacro()
ActiveSheet. Unprotect
'YOUR CODE
ActiveSheet.Protect
End Sub
The problem I'm running into is, when I protect the sheet from the main screen (allowing for everything but those listed above), then run MyMacro, the things that were previously allowed under protection are no longer allowed. Indeed, upon re-protection it prevents the user from accessing anything other then the very basics (selecting cells). How can I make it so that the protection works the same as before the macro?
I want to copy a protected cell from one file to another, and still preserve the protected properties. Currently, the copied cell will be unprotected.
I have a lead that I might need to override ctrl-c function to my own VB script.
How do we override ctrl-c function? What lines to put in VB file?
I know of the password protect feature to open a excel file or workbook, but does anyone know if this can be done for opening a worksheet.
I want to be able to view a worksheet after a password is entered, so therefore different worksheets have different passwords.
I have a file that needs to be locked down so that the end user does not have the ability to enter data where they shouldn't. The end users are very Excel illiterate, and have proven that I need to have high security in place. Here is my current VBA code - the purpose of which is to hide/unhide rows depending on data entries. (Disclaimer: this code may not be pretty as I am a VBA rookie, and I've begged borrowed and stolen from about 10 other threads on this board to get where I am, and yes it works).
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = "C7" Then Call Changeto1
If Not Intersect(Range("c9"), Target) Is Nothing Then
Rows("15:44").EntireRow.Hidden = True
Rows("15:" & Range("c9").Value + 14).EntireRow.Hidden = False
End If
[Code]...
The question is now....how can I unprotect the sheet so that this code works without allowing them to enter data where they shouldn't. I've been at this for days already.
I want to find a code to lock all the cells with data once a button is pressed and with the same button click i want the workbook to be saved.
View 5 Replies View RelatedI need to be able to save a copy of my spreadsheet but protect the structure so that the hidden rows cannot be opened by the person that I e-mail it to. At the moment I am using the current
Private Sub CommandButton2_Click()
Do
fName = Application.GetSaveAsFilename
Loop Until fName <> False
ActiveWorkbook.SaveAs Filename:=fName
Call ProtectRobin
End Sub
Private Sub ProtectRobin()
ActiveWorkbook.Protect ("Robin")
End Sub
The saving part of the macro is working perfectly, however I cannot get the protection to work. It must have a password - I do not want the receipient to be able to go 'Tools' > 'Unprotect Sheet'.
I know how to protect a worksheet with a password so that no one can amend the contents or view the formulas in the cells. And then we can un-protect the worksheet by clicking on the "review" tab in excel 2007 and so on. But recently I came across an excel sheet which was password protected and my query is that the "Review" tab was greyed out. What kind of protection was this that clicking on "review" tab option is also unavailable. And how does these kind of sheets get unlocked then.
View 2 Replies View Related