Data Validation Doesn't Work When Worksheet Populated From Userform?

Feb 21, 2014

I have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.

View 3 Replies


ADVERTISEMENT

Excel 2010 :: Dropdown Data Validation Menu Doesn't Work When Opened On Different Computer

Aug 19, 2013

Using Excel 2010, I set up a simple workbook with a spreadsheet on one page and the ranges for data validation on another. I successfully linked the fields in the "Category" and "Tender" columns with the data on the second sheet, making nice drop down menus. Everything works fine on my computer. However, when we open the workbook on a different station, the drop down menus disappear. If you highlight any of the "Category" or "Tender" fields, the little drop down prompt is missing; they behave like regular, un-formatted fields. It appears that the data validation became un-linked.

We tried opening versions with certain fields locked (Mainly the Total, Breakdown, and Summary areas, but the fields with data validation were still editable), and also completely unlocked documents. Every time, the drop down lists were lost when opened on different stations.

I've attached the completely unlocked version : 00_FLEX TRAVEL EXPENSE REPORT_v3.xlsx‎

Forget to check a box or something? This seems way harder for me to figure out that it should be!

View 3 Replies View Related

2003 Data Validation Doesn't Trigger Worksheet Change

Dec 31, 2008

I have a bit of code that calls a formatting sub depending on which cell is modified. It is triggered by the Worksheet_Change event, determines which cell is modified, and either calls the formatting sub or doesn't based on the location of the modified cell.

Some of the columns in the sheet have data validation with drop downs. If I select a value from the drop down, it doesn't trigger the Worksheet_Change. If I type a value into the same cell, it does.

This was apparently an issue in Excel '97, but supposedly fixed in '03?

View 9 Replies View Related

Copy Between Worksheets Doesn't Work (look For A Certain Value In Worksheet A And Copy That Row Of Data To Worksheet B)

Apr 13, 2009

look for a certain value in worksheet A and copy that row of data to Worksheet B.

However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?

PHP Private Sub GetInfo_Click()
    Dim r As Long, LastRow As Long, Status As Integer
    Dim Message As String, Title As String, Default As String, MyValue As String
    Application.ScreenUpdating = False
    
    MyValue = Range("A4").Value
    Workbooks("invoice.xls").Worksheets("A").Activate
    LastRow = Range("C65536").End(xlUp).Row
    For r = LastRow To 1 Step -1
        If Cells(r, 1).Value = MyValue Then
            Rows(r).EntireRow.Copy
            Workbooks("invoice.xls").Worksheets("B").Activate
            Rows("8").Select
            Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
        :=False, Transpose:=False
            Status = 1
            Workbooks("invoice.xls").Worksheets("A").Activate
            Rows(r).EntireRow.Delete
            
            Exit For
        End If
    Next r
    Application.ScreenUpdating = True 

View 2 Replies View Related

VBA Worksheet Name Check Macro Doesn't Work

Mar 10, 2012

I'm not sure why this macro in workbook "A" is not working when checking for the activesheet sheet opened in workbook "B"? I've included the tab name I'm looking for and the tab name opened in the workbook "B" in the MsgBox to verify it can pull the tab names properly in workbook "B" and it returns correctly. I'm not sure why the If Then Else is not working if that is the issue here.

Code:
Sub testmonthcheck()
Dim art156 As Workbook
Dim mm As String
Dim mmm As String
Set art156 = Workbooks("Actual_Run_Times_156.xls")

[Code] ........

View 1 Replies View Related

Doesn't Work If The Worksheet Hasn't Been Saved Yet

Jun 4, 2007

I'm trying to simplify a formula that I'm using in a spreadsheet that's being used mostly in Excel 2000.

2 reasons I'm doing this:

1) It doesn't work if the worksheet hasn't been saved yet.
2) It's ugly

=DATE(YEAR(DATEVALUE(MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,3) & " 20" & MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+5,2))),MONTH(DATEVALUE(MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,3) & " 20" & MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+5,2)))+1,0)

The formula returns the last day of the month of the name of the sheet. For example, if the sheet is names "Mar 07", it returns 3/31/07. (yeah, when the 2100 issue becomes a big deal, I'm not going to be ready but I have 92 years to think about it)

Even if I can't make it prettier, does anyone have a way to get the sheet name into a formula without VBA Code in a file that hasn't been saved.

View 9 Replies View Related

UDF Working When Called From Sub, Doesn't Work As Worksheet Function

Mar 28, 2009

I have written a user-defined function that searches for a small range within a larger range. The function requires two input parameters: the range you are looking for, and the range you want to look within.

For example, I might look for the string of values in cells A1:D1 in a larger range E1:H20. The function returns the row number in the larger range where the smaller range is found.

My problem is this: The function is working fine when I call it from another sub procedure. However, when I try to run it as a worksheet function, I get a "#VALUE!" error. The function pops up in the "insert function" menu, and it prompts for the two input parameters.

View 6 Replies View Related

Excel 2010 :: Intersection Of Named Ranges (same Worksheet) Doesn't Work?

Aug 19, 2013

I'm trying to make a range selection in a pivot table as per the snapshot below:

http:[url],....

The values I am trying to select are the ones that are both red and italic. (Mobile, Other Fix, Fix) from CBU_NA.

I've searched and found a way to select both the rows for CBU_NA category and also the column categ2.

However when I try to make an intersection out of the 2 ranges I receive an error. I'm using Excel 2010 on windows 7.Below the code I am using:

Code:
Sub FCST()
Dim r1, r2, r3 As Range

r1 = pt.PivotFields("categ2").DataRange.Select
Selection.Font.Italic = True[code]...

View 2 Replies View Related

Two Cells Data Validation List Should Be Populated In Third Cell With Unique Values?

Apr 21, 2014

In cell H5 there is list of dates and in H7 there is codex, based on these two conditions in H11 a data validation list should be populated from the code_sheet using column B. The populated list should be unique entries, as the column B in code_sheet has duplicates.

View 9 Replies View Related

Edit Data Populated In Userform ListBox

Jan 4, 2012

Any way to edit data that has been populated in a Userform Listbox? I am trying to create a userform which has a multicolumn (3 columns) listbox and data being populated from Sheet1!A:C. I am thinking that there would be an Edit button where when clicked the data for the row that is selected in the listbox is shown in 3 textboxes (one for each cell on the respective row) on the same form which can be edited. When the user clicks Save. The Listbox would be updated with new values (e.g. write over the values in Sheet1.

View 9 Replies View Related

Copy Data From Previous Row Into New Row IF Userform Textboxes Not Populated

Feb 19, 2014

I have designed a simple user form to populate a finding tracker spreadsheet. Updating the tracker works fine.

Although I only need to update certain textboxes in the user form, I find myself having to enter the same data in every textbox so that the next row of the spreadsheet is filled. In all cases, if a textbox is not updated for the next row, then the data should copy the data from the previous row.

For example, last data Transferred from the user form are as follows:

[Heading] Col A - Col B - Col C
[Row 1] Apple - Red - 10

Assuming I would only update the textbox for Col C in the user form, the next row in my spreadsheet would look like this:

[Heading] Col A - Col B - Col C
[Row 1} Apple - Red - 10
[Row 2] (empty) - (empty) - 20

As such, I would like to add a code that allows the data (Apple and Red in Col A and Col B) from the previous row to be copied automatically and only updates Col C with the new value 20.

Oh, I should add that I have mostly Textbox values (about 20 columns) in the spreadsheet with the exception of three columns with CheckBox values although I can always repeat the checkbox fields.

View 6 Replies View Related

Create Data Validation Field That Doesn't Allow Blanks Or Duplicates

Jun 4, 2014

I have a table for gym members and each member is assigned a unique member number.

spreadsheet.PNG

I wish to create a data validation field that wont allow you to leave the cells blank or use the same code twice.

this was my attempt that failed: =AND(ISERROR(MATCH(A:A, A2, 0)) <>FALSE, A2<>""

View 1 Replies View Related

Lsit From Data Validation References Sheet That Doesn't Exist?

Jul 25, 2013

I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden

View 2 Replies View Related

Userform Data Doesn't Show In TextBoxes On Another Sheet

Feb 23, 2012

I have a workbook with 3 sheets.

Sheet 1 is a sheet that has a shape with macro assigned to show Userform6.

Sheet 2 contains data that is displayed on Userform6. I use Userform6 to show statistical data that is on Sheet2.

Sheet 3 contains data that is input to ComboBoxes on Userform6 using the RowSource Property.

On Sheet 2, when I select Userform6, the data is correctly shown in all comboboxes and Textboxes......

On Sheet 1 when I select Userform6, only the comboboxes show the data...the textboxes do not show any data.

I do not want users to see the data on Sheet 2 which is why I want to show the Userform on a different sheet as the data sheet will be hidden from users.

Question is: How can I show Userform6 on Sheet 1 with all the data showing in textboxes?

View 9 Replies View Related

Macro For Selective Data Validation - Which Does Not Work

Jan 17, 2013

lately I have promised to program a little macro which looked easy for me to do but on which I have now spend a considerable amount of time without finding the problem why it is not running. I am working under Windows XP with Excel 2010, here is what i was trying to do:

In a worksheet there are two columns G and H. In both columns it shall be possible to select a number of possible entries from a list. For column G this is done via data validation, no problem. Now, the choices which are there in column H shall depend on the entries made in the appropriate row of column G. Column G thus functions as an overarching category. If I choose "Tree" in G, H would give me branches, leaves, apples. If I choose "car" the choices would be wheel, engine, gasoline etc. This shall be done by a Macro:

Code:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim cat1 As Range
Dim cat2 As Range
Dim x As Integer
Set cat1 = Range("G:G") 'Task Group
Set cat2 = Range("H:H") 'Task Category

[code].....

When running, it gives me Run time error 1004: Method "Range" of object '_Worksheet' failed. Debug highlights the row

Code:

With Range(Cells(ActiveCell.Row, 8))

View 2 Replies View Related

Data Validation To Work When A Duplicate Value Is Pasted Into A Column

Feb 10, 2009

I have to enter patient's SSN's into my database. The fastest and most error free way to do this is simply copy the SSN from the electronic chart and paste into the appropriate cell in the database. I don't want duplicates. So, I need the database to alert me when I paste in a duplicate SSN. I know you can set data validation to do prohibit duplicates by using a formula. In the attached spreadsheet the SSN is in column B, so:

View 3 Replies View Related

Can Data Validation Lists Reference Another Work Book?

Aug 17, 2009

I have a cell that I want to use data validation on so I have a drop down list. Problem is the location of this list will be in another workbook.. Is this possible to go from one workbook to another using data validation?

Also, depending on the information that is selected from the drop down list I want a cell to the left to pick the corresponding data from the list in the other workbook. These forms will always be in the same folder.. Not sure if that information is necessary but just in case you need to know.

View 4 Replies View Related

Data Validation With Nested IF Statements Or VLOOKUP Does Not Work

Jun 12, 2009

Excel spreadsheet will contain a form that will consist of drop down boxes (data validation). Each drop down box will define the data that can be selected in the next drop down box.

The way I initially went about it, is creating nested IF statements. However, we all know there is a limit of 7 nested IF statements. I have 10! So below formula does not work:
=if(B5=1,F5:I5, if(B5=2, F6:I6, if(B5=3, F7:H7, if(B5=4, F8:J8, if(B5=5, F9:H9, if(B5=6,F10:G10, if(B5=7,F11:H11, if(B5=8,F12:H12, if(B5=9, F13:I13, if(B5=10, F14:K14))))))))))

I tried other workarounds such as CONCATENATE, or & signs. No luck. VLOOKUP does not work also, because there are multiple columns in col_index_num. Anything else I try gives me this message:
“The List Source must be a delimited list, or a reference to a single row or column”

What should really happen is this:
User selects value in first list box. Second list box shows values associated wih the value from the first drop down only.

View 9 Replies View Related

IF Function Doesn't Work?

Apr 25, 2014

i checked and checked and my IF function just gives me the wrong answer... attached is just a sample data..i have over 230 lines to check actually..

View 4 Replies View Related

Hyperlink Doesn't Work

Feb 5, 2010

I have a hyperlink to [url] that doesn't work. When I click it I get an error saying "Unable to locate the server or proxy server". But when I cut & paste the address from the hyperlink into my browser (no chance of mistyping), it works fine.

View 11 Replies View Related

Right Click Doesn't Work

May 19, 2008

As said, the right click doesn't work anymore, last week it was working but it doesn't anymore. When I right-click wherever in the spreadsheet nothing happens but I know it's working because it works outside excel.

View 9 Replies View Related

Range Populated By Choice In Validation List

Mar 12, 2009

I have a Range on one sheet formatted like this and sorted by Sup then Rep:

Rep Sup
John Sally
Mark Sally
Joseph Sally
George Betty
James Betty

etc..

I have a Validation Drop Down list where a Supervisor is chosen. There's a specific range that I would like to automatically fill in with the reps assigned to the Sup. This is driving me crazy! I already know how to obtain that list as another Validation Drop Down, but not quite sure how to make those values appear in a range instead of a Validation List.

View 2 Replies View Related

Delete First Characters Doesn't Work?

Jan 22, 2014

See the excel sheet [URL]

I need to delete all the digits before / and also the / - in the valuta columns. But this =RIGHT(B2,LEN(B2)-6) doesnt work It says > the formula you typed contains an error

View 14 Replies View Related

Some Times If I Do A =if( ) Formula It Doesn't Work

Mar 12, 2008

What am I doing wrong here. Some times if I do a =if( ) formula it doesn't work. For example, look at the attached picture. Cell K63 should say "End of Run". But it doesn't, What gives?

Also I have had before where i do =IF(X62>$O$2,"End of Run", 0) (and $O$2 =81) and the cell when X62 is 81, not greater than. I know I can to >=, but thats not what I am doing.

View 11 Replies View Related

Macro Doesn't Work In 1 Out Of 4 Worksheets

Nov 30, 2012

i got a long macro to delete all rows with contains a column with the value 'xx'. The macro works in sheet 2K, 2F and 1G. But the weird thing is it doesnt work in sheet 1K (i copied the exact same part of the macro out of the other sheets). Is it possible that there are to many rows in the sheet (sheet 1K has 24.000 rows, 50% or more will be deleted with the macro. The error says bug in the line: If Not rng Is Nothing Then rng.EntireRow.Delete It stops showing all the rows wich should be deleted.

Sub GrondeigenarenVerwijderen()
Application.Goto ActiveWorkbook.Sheets("2K").Cells(1, 1)
Dim DeleteValue As String

[Code]....

View 5 Replies View Related

SUM / IF And LEFT Formula Doesn't Work

Jul 27, 2013

im trying to use below formula using SUM and two IF conditions and 1 left formula

Cond 1
Cond 2
Value

22
m9
10

23
m9
10

[code]....

the following formula works to capture the sum of combination 22 and m9:

{=SUM(IF((A2:A6)=A8,IF(B2:B6=B8,C2:C6,)))}

22
m9
20

24
m8
10

however, in my original table, the 22, 23 etc are values with 6 numbers as shown below

Cond 1
Cond 2
Value

2201
m9
10

2301
m9
10

[code]....

following formula didnt work;

{=SUM(IF(LEFT(E2:E6,2)=E8,IF(F2:F6=F8,G2:G6,)))}

22
m9
0

23
m9
0

why the secund formula didnt capture anything when i added left to the first one.

View 6 Replies View Related

VBA Doesn't Work When Sheet Is Hidden

Dec 25, 2013

I have below macro for Sheet2 and i have created a button on Sheet1.now whenever i press this button the macro will run and save Sheet2 as PDF file.

The problem is when i hide Sheet2 the macro doesnt work and it gives an error " Invalid procedure call or argument.

how to make this macro run even when the sheets are hidden ?

Sub PDF_Table()
'Sheet2.PageSetup.PrintArea = "$a$1:$x$140" '*****
'*** can remove the above line if sheet areas are already set and will not be altered
With Sheet2.PageSetup
.CenterHorizontally = True
.CenterVertically = True
.Orientation = xlPortrait
.Zoom = 60

[code]...

View 2 Replies View Related

SUMIFS Statement Doesn't Work?

Jun 12, 2014

I can't get this to work. What am I doing wrong? I keep getting a #VALUE! error.

=SUMIFS($G$2:$G$31,$L$2:$L$30,F37,$B$2:$B$30,G$36)

I want to sum the NUMBERS in golumn G if the DATE in column L matches the DATE in cell F37 AND if the TEXT value in column B is equal to the TEXT value in cell G36.

View 2 Replies View Related

Why Doesn't My Variant Array Work

Jun 26, 2008

The answer is probably "because I'm stupid", but I really can't get my head around it! I'm playing with variant arrays for the first (and possibly last) time,

The code I have is:

Sub test()
Dim vSheetColours As Variant
Dim iCounter As Integer
vSheetColours = Range("Colours").Interior.ColorIndex
For iCounter = 1 To UBound(vSheetColours, 1)
MsgBox vSheetColours(iCounter, 1)
Next iCounter
End Sub

(Obviously this code doesn't do anything useful - but if I could get it to work, I might have a chance of making my real code work!)

Colours is a range of 8 cells. Each one has some text in, and has a different background colour. I'm trying to store the colours.

If I run this code, I get a runtime error 13 type mismatch, and it highlights
For iCounter = 1 To UBound(vSheetColours, 1)

But if I replace
vSheetColours = Range("Colours").Interior.ColorIndex
with
vSheetColours = Range("Colours").Value

it works fine.

View 9 Replies View Related

Full Screen Doesn't Work.

Dec 4, 2008

This might be extremely easy, but why my Excel (nor Word for that matter) doesn't go to full screen anymore? I'm pretty sure that I haven't used any options, I do have a new graphics card, but all the other applications goes to full screen. I have restarted my computer. Basically I think that it's either some option, or then reinstalling Office.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved