Pulling Worksheet Data From Many Tabs

Aug 12, 2009

I am trying to do is populate one worksheet (in the same workbook) with data from many (ie 500) separate tabs. An example is as follows:

On the summary data worksheet, we will call Price Highs, I am trying to return one column of data from each of the 500 worksheets (aka their Price Highs). This is so that I can have each tabs (symbols) data next to one another for easy formula dragging and analyzing. Up to this point I have been using the Find/Replace function, but with this many worksheets I would obviously have to do it 500 times!

View 9 Replies


ADVERTISEMENT

Pulling Data From Multiple Data Tabs?

Aug 30, 2012

I have a spreadsheet with multiple data tabs feeding a few summary tabs.

For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.

I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.

View 2 Replies View Related

Pulling Info From Tabs Across Spreadsheet

Dec 10, 2012

I have a list of cities, counties, and schools with dates for each account. I want to put these into a workbook with tabs along the bottom for each one, then I want to be able to select all of the accounts that have a Jan 1st effective date and show them on a list in the first worksheet.

View 9 Replies View Related

Pulling Data From Multiple Worksheets To Main Worksheet?

Feb 26, 2013

I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments

My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?

View 2 Replies View Related

Formula For Pulling Data Into New Worksheet If Certain Criteria Met Without Using Macro

Jun 3, 2014

I would like the following columns to show on a new worksheet if column Z and AA (which show a date and time) are the same as todays date, the columns of info I would like it to pull through are Column C,D, Z, AA. The row numbers could be different daily? is this possible?

View 7 Replies View Related

Pulling Rows From Other Tabs In Workbook Based On Date?

Jan 25, 2014

I have a workbook with multiple tabs, each tab is representative of a person and their ongoing project list. What I am trying to do is to be able to pull rows from each tab identifying the persons active projects based on an assigned due date.

Details: Tabs for Tom/Susan/Phil/Jerry each person will be updating their own sheet with project completion details. Each tab has similar headers with a corresponding due date or completion date. On the master sheet I would like to pull those rows that correspond to the specific dates for all persons.

Example - give me all rows that reflect projects due on 1/21/2014.

View 6 Replies View Related

Importing Specific Csv Data Into Different Worksheet Tabs

Sep 26, 2006

I want to import a CSV file into a worksheet. one of the things i need to do for the import is seperate the data if its a different currency.BUT copy the format from a sheet called "MASTER" which will be hidden. some of the variables are as follows, there will be more

0 = GBP (£)
¢ = USD (U.S Dollar)
E = Euro
S = CHF (swiss Franc)
A = AUD

the csv file is layed out as follows

[BTTP][BDTEE8][BDTEP8][BATNUM][DESC1][DESC2][VALUE][CURRCY]

How ill i get VBA to loop throught the file and import the data into:

New sheets if the Currency has been found already? on the next available row if already exists?

View 7 Replies View Related

Pulling Information From 1 Worksheet To Another?

Apr 11, 2013

I am trying to create a simple ticketing system, just using the excel with no other PL.

I am trying to transfer the other in formation that I have create from 1 worksheet to another. If I input a particular number that I assigned I want that the other info along side with that number will automatically transfer to another worksheet.

View 4 Replies View Related

Pulling Information From Worksheet

Aug 20, 2009

This is a simple question but I just cant get the right format. I have a userform which saves info entered into the form into a worksheet. I have one cell in anoth worksheet (sheet2) which I would like include in the info from the form.

I already have the column entered in the database I am now trying to figure out how to include this in the save.

I would need to identify this cell in my VBA.

DIM "cell" as ?

View 4 Replies View Related

Pulling For Multiple Worksheets To Place Into One Master Worksheet?

Feb 8, 2013

I have a work book with prob close to a thousand individual work sheets in it. I have a goup of cells that are the same in ever work sheet that I would like to pull and place into a master work sheet. I dont want to copy and paste each one, I'd be a hundred before I finished and I dont have that kind of time. Im thinking a macro might be what I need but Im not very good with useing them let alone making one to fit me needs.

View 2 Replies View Related

Worksheet Tabs

Dec 22, 2006

How can I get the worksheet tabs to show?

I have gone to : Tools,option and the sheet tabs box is checked

View 9 Replies View Related

Worksheet Tabs Not Visible?

Jan 3, 2008

I can only view one worksheet at a time with a particular spreadsheet. There are no tabs to click at the bottom of the screen to view the other worksheets. In excel 2007, if I click on View, then Full Screen, I get the tabs (so I can view the different worksheets) but then I lose the menu and formula bar (so when I click on a cell I can only see its contents and not the formula). I need to see the formula that is applied. This has not happened with other S/Sheets, just this particular one. what else I can do to view the worksheet tabs without full screen view?

View 7 Replies View Related

Naming Worksheet Tabs

Apr 20, 2009

Is it possible to name a worksheet tab from a cell reference on a worksheet?

View 6 Replies View Related

Worksheet Tabs Disappeared?

May 18, 2005

I have been presented with a rather odd thing with Excel. We have a wookbook with six worksheets in it. When the first of worksheets is displayed, all the other tabs "disappear". The whole bottom tool/navigation bar is no longer displayed. How can I get it back?

View 8 Replies View Related

Worksheet Tabs With Same Cell Name

Jun 22, 2007

i got a question for anyone to help me with. i need help in figuring out how to type in a cell (A1) making it changing the worksheet tab as well. I watched Episode 452 of mrexcel's podcasts, but i cant see the text that he typed in. Can anyone help me with this problem or link me to another post where this same problem has already been answered.

View 6 Replies View Related

Combinding Tabs In A Worksheet

Nov 19, 2009

I have a vb code that merges all the tabs(sheets) in my work book. however i need to know how i can change my code so it only mergers certain tabs.

here is the code i have:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
ws.UsedRange.Copy
Range("A65536").End(xlUp).Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Selection.PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End If
Next
End Sub

View 9 Replies View Related

Worksheet Tabs Not Showing

Aug 23, 2006

I've received a workbook that contains maybe 60+ worksheets. To navigate the workbook, a person must use the hyperlinks on each sheet. However the worksheet tabs do not appear at the bottom of the sheet. I've checked Tools / Options / View / Sheet Tabs and the checkbox is checked. II've also tried unchecking and rechecking the box.) There are no custom views created.

View 2 Replies View Related

Sort Worksheet Tabs

Feb 16, 2007

I found the following "sort worksheet tabs" code by searching through the threads.

Sub SortSheets()
Dim lCount As Long, lCounted As Long
Dim lShtLast As Long
Dim lReply As Long

lReply = MsgBox("To sort Worksheets ascending, select 'Yes'. " _
& "To sort Worksheets descending select 'No'", vbYesNoCancel, "Ozgrid Sheet Sort")
If lReply = vbCancel Then Exit Sub

lShtLast = Sheets.Count

This code works fine but I need to adjust it a little. I have over 70 worksheets that will need to be sorted. At the same time, there are about 6 worksheets that I dont want to sort and want to keep right infront all the time.

View 6 Replies View Related

Hide Worksheet Tabs

Mar 16, 2007

I've done a search for this but cant find the complete answer for what I'm looking for. Basically I've got a "Home Sheet" set-up where the user can only navigate to worksheets via the buttons on the home page (with a short- cut to go back to the home page). It works ok (very basic though) but the user can still use the worksheet tabs at the bottom of the screen to navigate (making this system void).
how I can, either, hide the worksheet tabs at the bottom of excel, or, a better way of navigating these worksheets (there is only about 6 of them).

View 2 Replies View Related

How To Hide Available Tabs In Excel Worksheet

Jul 16, 2014

knew if there was a way to hide the available tabs in an excel worksheet.

I know you may be thinking just right click and hide, however what I am looking for is a little different.

Basically I have a Macro Enabled work sheet which works on a "one click" system. The work sheet is full of buttons with assigned macros and data validation drop down boxes which link to many different tabs. The entire sheet is for information only so I will be locking the sheets to avoid data manipulation. The problem with right clicking and hiding the tabs is that it interfears with the macros.

All I really want to do is make these tabs not visible. I have set the sheet to open in full screen mode and they obviously are still there, but this is basically what I am looking to do. Not so much hide them in terms of sending them into the background, more so make them "drop off" the bottom of the screen to they are still active but not visible.

View 6 Replies View Related

VBA - Search Worksheet Tabs By Partial Name

Jun 29, 2011

I have a spreadsheet that is sent to me monthly. Here is the issue:

Each workbook contains multiple tabs. The position of those tabs may be different positions when received.

The part of each tab's naming convention does not change, while the rest of the tabs' name contains random information.

My question: Is it possible to to search/find the tab based on part of the name?

example: Name on tab:
Pivot Table Data June 2011

Search for: Pivot

View 3 Replies View Related

Get A List Of All The Worksheet Tabs In Column?

Jul 23, 2013

is there a method to do this besides writing them out individually?

View 5 Replies View Related

VBA Code To Create New Tabs In A Worksheet?

Sep 5, 2013

I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.

For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.

View 2 Replies View Related

How To Create Worksheet Within A Macro With 10 Tabs

Feb 6, 2014

I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.

Sheets("Sheet1").Name=Sheetname(1)

Sheets.Add after:=Sheets(Sheets.Count)

I was looping thru this up to 10 now its not working. This isn't too complicated,

View 9 Replies View Related

Hide Specific Worksheet Tabs

Aug 7, 2008

Is it possible to hide specific worksheet tabs.

I have a workbook with many worksheets and I only want to hide Sheet1 and Sheet2.

View 9 Replies View Related

Renaming Worksheet Tabs Macro

Aug 14, 2009

I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created

The only worksheet names needed are below.

TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4

This is the extent of my ability:

Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub

I created six macros, but there must be an easier way.

View 9 Replies View Related

Copy Worksheet To End Or Far Right Of Sheet Tabs

Feb 27, 2009

This macro helps me create a blank worksheet and automatically names it from the list in column A. Unfortunately, it adds the worksheets to the left of my 'master' sheet called "Tab Names". When I try adding "after" when it adds a new sheet, I keep getting a "compile error: Expected: end of statement". I am positive you will know what steps I'm missing.

' Vendor List Subroutine to
' Open New Worksheet called Tab Names worksheet
' With data from Tab Names
' Rename sheet to name from list and start again
' For all names in list
Sub NewTabsFromList()
Dim cCell As Object, i As Integer 'Two variables cCell (current Cell) object and i (standard counting integer)
Cells(1, "A").Select 'Ensure that we start each time at the top of the worksheet
Application. ScreenUpdating = False 'Turn of screen updates whilst macro is running
For Each cCell In Range(Cells(1, "A"), Cells(1, "A").End(xlDown)) 'Will run our code through each cell with text
Set NewSheet = Sheets.Add(Type:=xlWorksheet) 'Add new worksheet
NewSheet.Name = "Tab Names Worksheet" 'rename worksheet
Sheets("Tab Names worksheet").Name = cCell.Value
Next cCell
End Sub

View 4 Replies View Related

Summarize From Multiple Worksheet Tabs

Jan 24, 2007

I have an excel spreadsheet with various worksheets, each worksheet is named different according to tests that must be performed. Each test is different and inputed by rows, there is one column from each test in which we populate "passed", "failed", "pending", "N/A", or "user issue".

The problem is searching for all the "failed", and "user issue's" throughout all the tabs. I want to create a tab which will identify and display all the "failed", and "user issues" on one tab, and sort it according to its tabbed test name. Now, not to be picky, I would like to copy only a few cells along with the failed message, if not, the entire row would be fine. Could anyone assist? to sum it up, I want to create a sheet that'll identify all the issues existing throughout tabs.

View 3 Replies View Related

Renaming Of Worksheet Tabs From List

May 18, 2007

I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?

View 2 Replies View Related

Pulling Data From A Tab

Jun 10, 2009

i want it to change the Header in E1 to the name of that price level and have the prices change according to that price level. The price level prices are currently being pulled from another tab through vlookups which lookups up the part numbers. My method only works with 1 price level right now and have no clue how to approach it with more then one price level. Also these part numbers will change positions and locations and are not permanent hence why i thought to use a vlookup.

Is there a way macro wise ( preferably through a formula ) that i can have Column E prices change according to the Price Level Entered.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved