I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
I have seen it accomplished where all worksheet tabs are arranged in a drop down list, and was wondering how to make that happen.
View 6 Replies View RelatedI use a workbook where new worksheet tabs are added and removed daily. Every day I use the second-to-last tab (2nd from the right) and the last tab (far right). What code would enable me to activate and reference both of these tabs individually? I believe it would be something like the code below but I can't figure it out...
View 5 Replies View RelatedI have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI'm writing/recording a macro and would like some VBA code. I'm trying to make a border around all used cells in my sheet. When I use the macro there will be a variable number of used cells.
I'd like code that says:
If cell A2 has text then format cells A2:CL2 with an outline border Repeat for each row in the sheet until there there is no more text in column A.
Also, not sure if it matters, but I'm working on a mac.
Is it possible to create tabs within a tab? If so how?
View 1 Replies View RelatedI had in my macro toolbox a macro where in column A I listed names for worksheet the macro would then create and name the worksheets from the list in Column. But unfortunately our share drive where I kept the toolbox crashed and all the data was lost.
View 1 Replies View RelatedI have a list of pairs of 406 pairs of currencies like the list below and I need to create a tab for each one of them and will take ages to do it manually, I am looking for a macro that can do it.
AUDCAD-AUDCHF
AUDCAD-AUDJPY
AUDCAD-AUDNZD
AUDCAD-AUDUSD
AUDCAD-CADCHF
AUDCAD-CADJPY
AUDCAD-CHFJPY
AUDCAD-EURAUD
AUDCAD-EURCAD
AUDCAD-EURCHF
AUDCAD-EURGBP
AUDCAD-EURJPY
AUDCAD-EURNZD
I have tried to use the one in other thread but I am not that good in editing the code:
Sub addsheet() Dim newsheet Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet) newsheet.Name = "ww16" End Sub
I have a column with multiple currencies. Is there a way to write a formula or some code that will look to that column, and create a new Tab for each new currency name it finds, and then name the Tab that currency?
For example, C5:C15 has an assortment of entries either USD, GBP, AUD. I'd like a search that looks to C5 and creates a new tab labeled whatever the first currency is, then move down the column and do the same thing every time it encounters a new currency, but pass over a cell if it's a currency that already has a tab made for it.
Well I am here at this fork in the road again.
I need to create 3 new tabs... 10,4, and 1
I have tried this and it creates the worksheet, but does not copy the "sheet1" as its format.
I need to do this 3 times.
For i = 1 To 1
Set ws = Worksheets.Add
ws.Name = "10"
Worksheets("Sheet1").UsedRange.Copy wsnew.Range("a1")
Next i
I'm trying to reduce some manual labor that I do each month by figuring out a way to create additional tabs for every different "branch" within a given column from a master table. The branch numbers may not necessarily be the same each month as some old may go and some new ones may come.
I have attached two excel workbooks. One shows the master "Data Table" and the other shows what I want it to look like "After Sorting". As you can see, I have to create a separate tab for each of the branches listed in column A on the master table. This becomes really cumbersome, especially when we really have about 20 branches but I'm only using these 6 for the example.
Data Table.xlsxAfter Sorting.xlsx
I have a large spreadsheet and want to sort by Column "L" and copy all the rows where Column L has the same value into a new tab named with the value in Column L.
View 2 Replies View Relatedi got a workbook made by one of the members in which on clicking of a button (make sheet)---->tabs of all the data in column A is made in that sheet. but if i want to copy a specific data that is present on main sheet to all the sheets created on click of button.
View 4 Replies View RelatedI need to create a formula using 2 different tabs within an excel workbook. I need to search column A on the first tab and column A on the second tab and if they match I need to compare column F on the first tab to column F on the second tab. (This column contains my staff names but the problem I am running into is on the first tab their names are listed first name last name and on the second tab they are listed last name, first name). If column A and F match I need to search column H on the first tab to column H on the second tab. If all columns match up to this point I need to take the data in column Q on the second tab and in put it into column K on the first tab. Is this even possible?
View 2 Replies View RelatedI would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedIs it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies View RelatedI work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)
I want to create a macro that creates a new .xlsx document based on cell values. And input 4 tabs into each document with specified tab names. I have a document that pulls from external sources and fluctuates with amount of data per day. I envision something that will make a new document named for the contents in cell A1, then function as a control+down to create a new document for A2, then A3 until there is no content left (should mention these are lookup formulas, and if there is no data it pulls a value of "0")
Is there a way to put in the code, the tab names it would create in each new document, or would that have to look to a cell value for the naming? The tab names would be "GS", "MYSS", "COLL SHEET", and "WIRE".
I have the code below and it runs a report for me but it puts the new tab to the left of my existing tabs. How can I alter the code to put the new tabs on the right?
If Me.cmbCat.ListIndex > -1 Then
'Add a new worksheet
Set WSReport = Worksheets.Add(before:=Worksheets(1))
With WSReport
'Check sheetname and keep adding 1 until not found.
If SheetExists("Report " & Me.cmbCat) Then
Cnt = 1
Do
[code].....
I am pulling my hair out in frustration with this right now. I have a .csv file that I am attempting to run a macro on. I will need to move between tabs, and want to rename a tab to remove the date as it is not consistent in format. I have tried numerous ways, and I don't get an error message, but the tab is not renamed either. Code I have tried is below ....
View 9 Replies View RelatedHow can I get the worksheet tabs to show?
I have gone to : Tools,option and the sheet tabs box is checked
I have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
I can only view one worksheet at a time with a particular spreadsheet. There are no tabs to click at the bottom of the screen to view the other worksheets. In excel 2007, if I click on View, then Full Screen, I get the tabs (so I can view the different worksheets) but then I lose the menu and formula bar (so when I click on a cell I can only see its contents and not the formula). I need to see the formula that is applied. This has not happened with other S/Sheets, just this particular one. what else I can do to view the worksheet tabs without full screen view?
View 7 Replies View RelatedIs it possible to name a worksheet tab from a cell reference on a worksheet?
View 6 Replies View RelatedI have been presented with a rather odd thing with Excel. We have a wookbook with six worksheets in it. When the first of worksheets is displayed, all the other tabs "disappear". The whole bottom tool/navigation bar is no longer displayed. How can I get it back?
View 8 Replies View Relatedi got a question for anyone to help me with. i need help in figuring out how to type in a cell (A1) making it changing the worksheet tab as well. I watched Episode 452 of mrexcel's podcasts, but i cant see the text that he typed in. Can anyone help me with this problem or link me to another post where this same problem has already been answered.
View 6 Replies View RelatedI have a vb code that merges all the tabs(sheets) in my work book. however i need to know how i can change my code so it only mergers certain tabs.
here is the code i have:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
ws.UsedRange.Copy
Range("A65536").End(xlUp).Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Selection.PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End If
Next
End Sub
I've received a workbook that contains maybe 60+ worksheets. To navigate the workbook, a person must use the hyperlinks on each sheet. However the worksheet tabs do not appear at the bottom of the sheet. I've checked Tools / Options / View / Sheet Tabs and the checkbox is checked. II've also tried unchecking and rechecking the box.) There are no custom views created.
View 2 Replies View Related