i want it to change the Header in E1 to the name of that price level and have the prices change according to that price level. The price level prices are currently being pulled from another tab through vlookups which lookups up the part numbers. My method only works with 1 price level right now and have no clue how to approach it with more then one price level. Also these part numbers will change positions and locations and are not permanent hence why i thought to use a vlookup.
Is there a way macro wise ( preferably through a formula ) that i can have Column E prices change according to the Price Level Entered.
In the little chart on the left, I have the customer name, when their story is due, and when it was completed. On the right, I want to show how many words per hour my journalist is averaging for each week. What I'd like to do in cells J2 through J5 is to have a formula that pulls out the total number of words written for all projects that occurred during that time frame. I can't seem to figure out the formula, though. I was thinking that I needed an array formula starting with ifferror and calling from the row functions, but I can't seem to get it to work out right.
Here's my sample sheet: sample data journalists.xlsx
What I am trying to do is pull data from one spread sheet into another. The Data spread sheet has 2 columns. Date and Price. What I need to do is enter a date in to row b2 (example 2/13/2013) Then Cells c2-v2 fill in with the data from the 20 days prior to 2/13/2013. Also note that I use only dates from weekdays.
I have searched extensively for an answer to this but can't find anything.
I am pulling data off the web and it puts data down the column in the following manner:
Data Number Number
Data2 Number Number
I need to extract each set of Data to another worksheet. The problem is that it will be anywhere from 1 row each to 10 rows each. In each instance, there is a blank between the two sets of Data. I've looked at ISBLANK, LOOKUP, SEARCH, etc. but nothing I've tried has worked out.
I have written a macro to pull in data from a website each day. However the macro falls over because the end of the url changes slightly each day as the website provider updates the information. Unfortunately there does not appear to be a logical pattern to the number change in the url and so I don’t think I can pre-empt what the change will be. The path through the website remains the same, but the url changes as a new csv document replaces the old one. Is there any way of writing the macro so that it opens/picks up the current url rather than a fixed url?
I went through the thread http://www.mrexcel.com/forum/showthread.php?t=302438. I have similar problem of pulling the data from http://www.nseindia.com/ site. Could you please help me?
The navigation to the page required is as below.
http://www.nseindia.com/ > Equity > Historical Data > Security-wise data >
eg. NSE Symbol: RPL, Series: ALL, From date: 01-01-2008, To date: 01-05-2008.
After clicking on the 'Get Results' button it navigates to the page with tables. At the end it says "Download file in csv format". upon clicking this a csv file opens. (http://www.nseindia.com/content/equi...-2008RPLXN.csv)
I need this page to be opened in Excel sheet. How should I go ahead? (Basically I need historical stock data csv files of various stocks)
Even though a simple web query opens the page, it do not work if the parameters (stock name, date) are changed.
I found that the last resulting page in csv is using a "REFERRAL URL". Could this be a problem? How to get around?
I know little bit of VBA and can further work to pass variables.
I get excel files containing information listed by store for the entire company. How can I sort and pull out only the information pertaining to the stores that are in my area?
I am having trouble pulling data from a website. I need to get data from this website:
{url}
I need the highs and the low temperatures for the next week. (just the numbers preferably). But when I go to Data>> Import External Data >> New Web Query i'm not able to get any of the numbers into Excel. This way worked fine with other websites.
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
I have a generated list that pulls data from a different sheet. I need a formula to pull only unique values from that generated list since some values are list multiple times.
In VBA I'm trying to grab numbers from a cell range (ie: A1:A10), and save them to a matrix or variable. I will later need to grab additional numbers and add it to that matrix. I have experimented several different ways, but belows demonstrates what I'm trying to do:
I have over 7000 items with a unique 6 digit item number each. They are separated buy category numbers. So category 5 may have 30 item numbers in it. column A has 555555555666666666777777777. Column B has the item numbers. I have about 200 categories.
In the workbook I have separate sheets for each category.
I need to pull all the item numbers from category 5 to sheet tab 5, all cat 6 numbers to sheet tab 6 and so on.
I am tracking 3 different payment types, and the employee, customer and dollar amount for the transactions that can not be verified. All of this data is then transferred over the the "Summary" sheet. I found the Countif formula that will tell me how many times an employee names appears on the sheet, but I was wondering if it were possible to also calculate the dollar amount associated with those transactions.
I have attached the spreadsheet to better explain what I am talking about, but below is a very small example. I do not want to calculate the info on this page, but rather add another 2 cells next to where the number of unclaimed and the % of unclaimed are calculated on the "Summary" sheet. Sample spreadsheet2.xlsx
A B C D 1 Date EmployeeCustomer $ 2 1-Jan MonicaJohn Doe $65.00 3 2-Jan AshleyJane Doe $85.00 4 3-Jan MonicaJustin Doe $15.00 5 4-Jan MonicaJessica Doe $135.00 6 5-Jan AshleyJeremy Doe $100.00 7 6-Jan CheriJustine Doe $50.00 8 7-Jan CheriJace Doe $450.00 9 8-Jan JudyJackie Doe $50.00 10 9-Jan MonicaJake Doe $65.00 11 10-Jan JudyJennifer Doe$85.00
i am currently working on a file that counts things during the day and then sums them up. i have a different sheets for each day witch are named 28.07,27.07,26.07 etc'
i want the current sheet to pull data from the last sheet, lets say from cell I10. so if i'm working on the 28.07 - i use the formula " ='27.07'!I10' " and it works just fine. but i want to automate it. lets say make a cell in every sheet with the name of the previous one (i figured out how to automatically generate it) and make the formula pull from there. so lets say if i use the cell B2 for the value of the previous sheet (27.07) - it should look like " =B2!I10 "
I don't think this may even be possible, but what I am trying to do is pull only certain information from one worksheet to another based on whether there are entries on certain dates for employees.
A sample is attached.
On the first worksheet I have a drop down menu for all employees on the second sheet. (the drop down menu pulls the names from the second sheet)
The second worksheet has all employees in Column A and to the right has all their variances by date. Most dates will be blank as they didn't have a variance.
What I would like is on the first worksheet, is to select their name from the drop down menu and have all the dates that they had variances and the variances show up.
If you take a look at the attached excel file it might explain what I am trying to do better.
I have a table populated with values for given dates. Some days there is no data. I would like a separate table over to the right to automatically populate with only the date and data.... (no spaces). I will attach an example problem to this Thread.
I have a huge listed of assets - the column i where my info is has vasrious serial numbers.... some are a simple string of letters/numbers and the others look like this for example AG-1234567
I need to somehow pull out the ones that look like that. (AG-1234567). I only need those. Now normally i would just do a filter and pull em out however, this sheet contains 73k worth of items.
I would like to be able to copy a single row of data from a huge sheet containing about 7000 rows on a daily basis. This would be a non issue except that it is not in the same row from day to day. It may be in row 1624 today and 1620 tomorrow basically. In the second column is a unique ID number that says constant though. I need a macro that can find this number and copy the entire row of data to another sheet.
The second issue I am having is that this data is from a .csv file that is posted on the next business day. The name of this file changes day to day because the name of the file is the date it was from.
i need to pull data from one spread sheet and place it in a new spread sheet. and i am not that familiar with macros i am learning but i need to get this done.
I have a folder which contains a number of Workbooks which were all built using the same template, therefore the layout and formatting is identical in each one. Cells A1:B15 of these workbooks contain information which I am attempting to extract.
I have been asked to build a worksheet with two cells for user's input. The first cell is the 'Directory location cell' and the second cell is the 'Policy Number Cell.' The policy number is found in Cell A2 of every workbook.
The idea in mind is that the user inputs the directory location in the first cell, the policy number they are searching for in the second cell and then excecutes the macro. The Sheet would then return all of the valuable information from whichever workbook contained it.
I think I need to compose a macro which trawls through the folder specified in the 'Directory Cell,' opened every xls until it found the policy number which matched the value in the 'Policy Number Cell' and then returned the cells A1:B15 into the new Sheet.
I have a generated list that pulls data from a different sheet. I need a formula to pull only unique values from that generated list since some values are list multiple times.
I have two work books. One is called Ipad and the 2nd is data.
- In Ipad I have 80 pages. - Cell B20 through I20 is merged (B21:I21, B22:I22 etc through B25:I25) - There is data in those cells which I assume would be B20 since it highlights the merged block
My question is on Data workbook, I would like to use VBA code and copy all the data from B20 to B25 from each page (1-80) and paste them in Data cell A1.
Is this even remotely possible since the cells are merged? If it would hep to un-merge them my question would remain the same. I would like the data on each page from b20:b25 copied into data Cell A1
Im currently working to speed up my monthly reporting process. Each month I pull data from the ledger by account & office. Below is an example of what the format of the ledger looks like.
My next step is to report the amounts by account number for each office. At the moment I do this manually, which takes a very long time. My goal is to be able to paste the ledger data on a worksheet and have my report populate automatically.
In regards to the account numbers from the ledger, we summarize the accounts using the first 3 digits of the account. For example, account number "1113454" would be considered a "111" account. Account number 3335454 would be considered a "333" account.
************************************************************************>Microsoft Excel - 3Q Global Variance Analysis.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB16C16D16E16F16B22E22B23E23B24E24B25E25B26E26= ABCDEF1Ledger2******3*Office*1Office*2Office*3Office*4Office*54*SEP-06SEP-06SEP-06SEP-06SEP-065Account*Number*****6111234127.00766.004,446.007,865.005,509.00711135433,000.0034,566.0099,433.00100.00471,612.76811167645,677.009,898.002,212.0034.00877.00911190932,445.00466.0043,435.00343.005,665.00101118881,876.00433.006,566.00900.0020,398.4411113454121.0032.00900.0075,329.3222.001211345517,678.005,443.00434.00233.0064,556.00133331115,658.00875.00222.0032.00654.001433350090,932.007,634.00122,246.002,134.0055.0015333009123.00543.00990.009,005.00888.0016Sum227,637.0060,656.00280,884.0095,975.32570,237.2017******18My*Report*19******20111*Balance*113*Balance*21OfficeBalance*OfficeBalance*22Office*1113,125.00*Office*117,799.00*23Office*246,129.00*Office*25,475.00*24Office*3156,092.00*Office*31,334.00*25Office*49,242.00*Office*475,562.32*26Office*5504,062.20*Office*564,578.00*27******Ledger* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a VLOOKUP, which uses a named range called Department. The first column is sorted in asending order. The department numbers are 4 digits, formatted numeric. The department numbers are in order up to Department #19000, then they jump to 50000 series. Here's the problem, the 20000 department seris is in the master database, and the lookup is returning the data relating to Department #19000, instead of NA.
