I am using the following range to copy data from Column A (from rows 3 on the the last row). How can I include Columns B and C into this range also, but still using Column A to find the last row?
[Code] .....
I posted this on Mr Excel, but did not get an answer. I hope someone here can help.
I have a rather large financial worksheet that I am trying to extract some specific data from.
The sheet contains budget and expense #'s for the fiscal year for several projects. The project names are listed in column G and the same project can be on multiple lines, depending on what the expense is. Column J contains either "Cap" for Capital, or "Exp" for Expense. The monthly data starts at Row L. Each month has 6 columns, the one that matters for this scenereo is the 5th one for each month, which is the Forecast Column.
Our Fiscal Year is April 1 - March 31, but this sheet ruins from March - March so that we can carry over anything from the previous year. So the forecast column for March is column "P", April is column "V" and so on, adding 6 columns for each month.......
With me so far?
What I am trying to do is get the total forecasted expenses amount for a specific project for the remainder of the fiscal year.
In other words I need to look for a specific Project Code in Row G, look for "Exp" in Row J, Then get only the numbers that are in the Forecasted Column for months in the future and add them all up.
Just in case that is not totaly clear----
criteria to meet
Column G = "Project Code"
Column J = "Exp"
Row 2 > this month
Row 3 = Forecast.......................
I'm attempting to match a name with the row and column numbers of data that is laid out in a grid format. It looks something like this:
Denson
Matthews
Smith
[Code]....
This works just fine, except for the fact that once in awhile the same name will appear in the grid twice, and the row and column returned will be off (it will return the row for one of the Smiths, for example, and the column for the other).
I know why this is occurring so I'm looking for a better way to do this. The good part is that I don't necessarily need both locations returned for each "Smith" ; I just need the correct row and column for at least one of the instances. I'm looking for a better way to do this.
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedI want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
I have a large spreadsheet that contains and employee number and then up to 5 entries of Dependants (each has its own column). What I need to do is have 1 for each of the dependant information instead of 5 and have multiple rows for the employee if they have more than one dependant.
At the moment I am sorting the data by dep 1 name, pasting the data into a new sheet, deleting all the dep 1 stuff, sorting by dep name 2 and pasting that.........etc.
It doesn’t take too long to do but I just wondered if there might be a quicker way as this will be something I will need to do more often.
create a formula,for multiple criteria with multiple results in rows.
[URL]
I have a sheet that is organised as follows:
a) Column A contains 50 names, all unique. R1C1 heading is "Name".
b) Column B to Column H are for some text that can contain special characters, numbers, spaces etc.
c) R1C2 heading: "Day 1"
d) R1C3 heading: "Day 2". and so on till R1C8 having heading as "Day 7"
e) All the cells are filled in the specified range as specified in (b) above.
In summary, each of the names will have 7 different tasks associated with it in the row. These tasks can repeat for all the names.
For example: Consider the below set of data for 3 rows and 7 columns (spaces are used as column delimiter. In reality, spaces can form part of the tasks for each name):
Name D1 D2 D3 D4 D5 D6 D7
-------------------------------------
aaaa T1 T1 T1 T2 T3 T4 T5
bbbb T1 T2 T3 T3 T3 T4 T5
cccc T1 T4 T4 T4 T4 T4 T4
I hope its clear till this point.
Now my requirements are as follows:
a) Find out all unique elements from the set of tasks across all days and list them from 100th row onwards with each unique entry in new row.
b) For each of the unique tasks, list the names that have worked on that task in the same row.
For example, the output should be as follows:
T1 | aaaa, bbbb, cccc
T2 | aaaa, bbbb
T3 | aaaa, bbbb
T4 | aaaa, bbbb, cccc
T5 | aaaa, bbbb
The character "|" above is used as a seperator for columns.
Date
Name
Diesl
Petrol
Oil
Kerosene
[Code]...
Here from the above table i want to get the complete sum of all numbers corresponding to a specific date and person..
I used sumifs which looks like this: =SUMIFS(C2:F10,B1:B10,A12,A1:A10,B12)
But that doesn't work, should i resort to using multiple sumifs?
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have following information. I need to transpose the columns into rows
C
10001
V
1000
V
1001
V
1002
C
10002
V
1001
V
1003
C
10003
V
1001
V
1003
V
1004
The expected result should be like
10001 1000 1001 1002
10002 1001 1003
10003 1001 1003 1004
I'm trying to move multiple ROWS to COLUMNS. My data looks like this:
ID CLASS_NBR1 UNITS_TAKENGRADECLASS_NBR2UNITS_TAKENGRADE CLASS_NBR3
000555 688 1 A
000555 567 3 B
000555 888 1 C
000555 999 1 B
000555 889 3 C
101999 889 3 A
101999 567 1 B
I have between 4-9 rows that I'm trying to move to columns. I'm attempting to move data for each student on one row, currently each student has between 4-9 rows.
I've tried so many different formulas and MACROS that didn't work I started doing this one by one (manually) but I have too many rows and it's taking too long.
I have an interesting problem I've been presented with and rather than try formula after formula I thought I'd propose it to you all (see attached sheet).
I have 7269 rows with 1930 distinct claims. I need to pull out the Primary issue (done that) then across from it put in each and every secondary issue (from col C). The largest # of claim lines is 89 (see E1). So in theory I need to find that claim and put all the secondary issues in the next 89 columns from row 4990 beginning in col H.
I've done a couple examples of what I'm looking for in rows 2, 4 and 5 and 8 but beyond that ...
So every place where there is a value in col F I'd like the list of secondary issues in the same row.
I have a file that I want Column D to average by column A and C. I also want to ignore any rows that dont have data in column B in the average. See sample file.
View 5 Replies View RelatedI have a spreadsheet that has ONE row for each day of the year and FOUR columns for each day. Some days use 1, 2, 3 or 4 columns. I need to turn these into rows for each Column.
Here is an example of the detail data: ....
create a Dynamic Named Range for Pivot Tables
the pivote table takes data from A1 to Kx
x is the last row of column K that is not 'blank' ( whenever I insert a new row),
I already know how to define a zone but not know how to to make it "dynamic"
I have named ranges and I want to get the total number of columns/rows or the last cell so I can index relative off off it to get at a value of an individual cell. No I dont want to go definning all names for this specific location, I want the flexibility to relative address it from the row/column or last cell of the named range. I looked at the column and columns props. The first gives a number that makes no sense and not a total of all columns and the last gives back a Range of columns, wonderfully recursive.
View 7 Replies View RelatedI want to essentially create a meal plan and then have my shopping list generated from the ingredients columns/areas into a separate sheet for printing. I need shopping list generation. I have attached a sample of what I am currently working with but still needs a lot of tweaking. I am not the most advanced excel user as you can see but I continually try to improve upon all of my work.
Test_Meal_Plan.xlsx
I have a dataset consisting of concentrations of parameters (alpha and beta) at different locations over multiple years. I've included an example dataset here.
I need to calculate an average and standard deviation for each parameter that spans multiple locations and years (but not all locations and years).
Example 1: Calculate the average and standard deviation of alpha values from years 2009 to 2012 at locations A and C.
Answer should be: Average of {0.84, 0.47, 0.27, 0.14, 0.36, 0.65, 0.66, 0.85} is 0.53. Standard deviation of {0.84, 0.47, 0.27, 0.14, 0.36, 0.65, 0.66, 0.85} is 0.26.
The real dataset is large, including 7 different parameters and more than 30 locations. I need to perform these calculations for many parameters, so am looking for a formula (or array formula) that will do this in as little cells as possible. Can this be done by formula or will I need a macro?
Location
Parameter
2008
2009
2010
2011
2012
2013
LocA
alpha
0.24
0.84
0.47
0.27
0.14
0.33
LocA
beta
4
9
9
8
2
9
LocB
alpha
0.24
0.33
0.85
0.54
0.56
0.65
LocB
beta
8
7
6
7
2
9
LocC
alpha
0.24
0.36
0.65
0.66
0.85
0.92
ertret.jpg
I am trying to delete rows that contain the same addresses BASED ON COLUMNS.
Do you see how in columns C and D they all match EXCEPT for row 4? How do I delete allllll the rows that when c and d match.
I want to keep the ones that DO NOT MATCH.
P.S I HAVE 4000 ROWS I WOULD HAVE TO GO THROUGH
I've not used SUMPRODUCT previously and can't understand how to get results for the attached.
I've tried SUMIFS but it doesn't work because I'm looking down columns and across rows, I'm assuming.
I've attached a summary of what I'm trying to achieve. I want to sum all costs with an R,P,I,G, etc. in column C for December '13 (E3) in the top table.
The second table is actually in a different sheet but is the source of the data I need added.
Sumproduct P&L.xlsx‎
I wonder if Excel allows scrolling many columns or rows at a time. That's right, I have a worksheet with frozen panes by "D2" cell; then there are sets of 4 columns for each day of the month (for example "D:G", "H:K" and so on). I need when I scroll horizontally, that every first column of the set to snap at the edge of pane at once. In other words, is any elegant way that usual scrolling pace of one column/row at a time to be changed to 4 at a time?
View 3 Replies View RelatedI have a spreadsheet that calculates data in multiple columns (A:AN) and each column has 27 rows of data called "Sheet 1". As it stands, the spreadsheet goes out very far. On "Sheet 2" I would like for all of the data in "Sheet 1", columns A:AN to be "transposed" to "Sheet 2" in column A only. So, column A on "Sheet 2" would have the data from "Sheet 1" A1:A27, B1:B27, C1:C27, so on and so forth. I would like for the formatting to maintain the same order as well.
An example would be:
Sheet 1
Column A B
Row
1 Green Red
2 Blue Yellow
3 Black Cyan
4 Pink Magenta
[code]....
I have a formula that I wrote in B2 and then applied vertically to a large list of rows (100+). I applied it vertically by simply double-clicking the cell with the formula, and it cleanly applied the formula to every row in Column B.
This formula now needs to be applied horizonally across columns, for each respective row. I need a way to do this in one swoop, as it would be very time consuming to manually drag each cell in column B.
I've attached a sample spreadsheet with a simple formula just for the sake of an example.
I want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 Replies View RelatedI have is a list of the over 500 people with one line per college degree. Some have up to 4 or 5 degrees. Each have SSN as unique identifier.
I need to consolidate into one like per person with multiple columns one for each degree.
See attached : Test Degrees.xlsx
[URL]...I was trying to use this thread's solution macro on my sheet that is only consolidating columns A, B, and C with a couple thousand lines and I've had it running for over an hour now. There hasn't been any errors but is there any particular reason that might be causing it to take longer than it should aside from having to go through a few thousand rows?
Basically, I only want 1 Version of data in Column B and any other rows that has a match in column B, i want to consolidate unique data from Columns A and C.
A B C
AB 123 AAC
BA 131 AAC
AB 222 CAA
Res:
A B C
AB 123, 222 AAC, CAA
BA 131 AAC
I have values in column D & K. Now i want to hide the rows with Zero's if they are in both D & K. Now if there is a Value in K and a Zero in D i don't want to hide that row.
Could someone please help if this is possible. I attached the code below for hiding lines according to one column:
