I want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 RepliesI have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
View 4 Replies View RelatedI am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies View Related1. By entering a numerical value in Cell A1 for example typing 5.
2. Then, next five columns would be blocked with specific color.
3. if i am typing 10, then 10 columns would be blocked with specific color.
how I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View Relatedis there any easy way to fill alternate rows of a worksheet with a particular color? I have a worksheet with 175 rows and alternate rows are to be filled with green!
View 4 Replies View Relatedi found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
I have a simple spreadsheet. A column for a persons name and 31 columns, one for each day of the month. I want to apply conditional formatting, either fill color or border color, to the date column of the current date when the spreadsheet is opened.
View 2 Replies View RelatedI would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
I have a spreadsheet with 10 columns which are for tags for products. Some columns are filled in for 10 products and some are not. For instance, product 1 has 7 tags while product 2 has only 2 tags and so on. Now what I am looking to do is combine all the tags for each product with a "," inbetween each one. The problem is if I just use a simple =A2&","&B2&","&C2 etc formula is that if there are only 2 tags then I get 8 ","s. I also tried it with an IF statement but by the time I was done nesting items I became cross eyed and said there has to be an easier way to do this.
I have create a spreadsheet with the data and the result that I typed into the "result" column.
I have 4 columns. I want to add 100 to all rows in the first column, 150 to the ones in the second, etc. Is this possible? I have Excel 2007.
View 9 Replies View RelatedI have a table = Columns A - E contain data in a variety of formats
Code1
Code2
Code3
Code 4
Code 5
Code6
dog
9
12/1/1987
hamster
dog,9,,12/1/1987,hamster
What Column F (code 6) should contain is a csv of Columns A-E as shown.
What formula for Column F will automatically fill the values for all data within a row in a csv?
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedI'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedI have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedI'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
For some reason the fill color and font color no longer work! If I set the font color as red, it continues to show up as black!
This is the strangest thing! I have no conditional formatting set and this just started a week ago.
I want every even row that has a value in it to have a different fill color (same color for all). how to do it? I am using 2007.
View 5 Replies View RelatedI was handed a pdf of some leads by a co-worker. Finally, I got the data into excel but it's in a pretty useless format... 30,000 rows of contact info with no rhyme or reason. I want to upload this into our CRM, but I need to get all the different bits of info into separate columns. I'm no excel pro, but I managed to use an Excel plugin called ASAP tools to bring some order to this chaos... All names have a blue cell color, all titles have a green cell color, work phone is red, and so on.
Does anyone know a way that I can sort these into separate columns? I've trying playing with the Filter function, but it hides rows which makes the output useless for my purposes.
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I have a large spreadsheet that contains and employee number and then up to 5 entries of Dependants (each has its own column). What I need to do is have 1 for each of the dependant information instead of 5 and have multiple rows for the employee if they have more than one dependant.
At the moment I am sorting the data by dep 1 name, pasting the data into a new sheet, deleting all the dep 1 stuff, sorting by dep name 2 and pasting that.........etc.
It doesn’t take too long to do but I just wondered if there might be a quicker way as this will be something I will need to do more often.
create a formula,for multiple criteria with multiple results in rows.
[URL]
I have a sheet that is organised as follows:
a) Column A contains 50 names, all unique. R1C1 heading is "Name".
b) Column B to Column H are for some text that can contain special characters, numbers, spaces etc.
c) R1C2 heading: "Day 1"
d) R1C3 heading: "Day 2". and so on till R1C8 having heading as "Day 7"
e) All the cells are filled in the specified range as specified in (b) above.
In summary, each of the names will have 7 different tasks associated with it in the row. These tasks can repeat for all the names.
For example: Consider the below set of data for 3 rows and 7 columns (spaces are used as column delimiter. In reality, spaces can form part of the tasks for each name):
Name D1 D2 D3 D4 D5 D6 D7
-------------------------------------
aaaa T1 T1 T1 T2 T3 T4 T5
bbbb T1 T2 T3 T3 T3 T4 T5
cccc T1 T4 T4 T4 T4 T4 T4
I hope its clear till this point.
Now my requirements are as follows:
a) Find out all unique elements from the set of tasks across all days and list them from 100th row onwards with each unique entry in new row.
b) For each of the unique tasks, list the names that have worked on that task in the same row.
For example, the output should be as follows:
T1 | aaaa, bbbb, cccc
T2 | aaaa, bbbb
T3 | aaaa, bbbb
T4 | aaaa, bbbb, cccc
T5 | aaaa, bbbb
The character "|" above is used as a seperator for columns.
Date
Name
Diesl
Petrol
Oil
Kerosene
[Code]...
Here from the above table i want to get the complete sum of all numbers corresponding to a specific date and person..
I used sumifs which looks like this: =SUMIFS(C2:F10,B1:B10,A12,A1:A10,B12)
But that doesn't work, should i resort to using multiple sumifs?