I need to take every 4th data point from an array of several hundred (col A) and place the reduced array in a new column (col B). I initially tried approaching this in VBA and then tried excel, but to keep it simple i won't show the code that didn't work.
Col A Col B
5.001 5.001
5.002 5.802
5.001 5.951
5.003
5.802
5.805
5.801
5.804
6.951
6.950
6.952
6.951
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
I have a column with numbers in about 500 rows. The entries are 5 numbers long and others 8. So I thought i could use one of the following: A macro code to tell a cell to delete the first 3 numbers if the entry is 8 numbers long?
OR
A macro code to tell a cell to reduce itself to 5 digits long starting from the right? Attached is a small example
I have a problem where I extended a formula down to over 40,000 records which has increased the file size substantially. I only need it to scroll down to a few thousand rows now that I realized that there is alot less data to populate the worksheet. Is there any way to get it back to a scroll range that is more modest in size?
View 1 Replies View RelatedI have a column that has section numbers like 001.002.006.003.010.011.002.
I would like to divide that single column into seven columns with only the single or double digit in it, ie
1 in a cell
2 in a cell
6 in a cell
3 in a cell
10 in a cell
11 in a cell
2 in a cell
Have been using MID and FIND togther, but when I get to the double digits like 10 an 11 I run into problems.
I have 3 columns, in column 1 and 2 there will be numbers and I want automatically to get in column 3 the range of numbers between Column 1 and Column 2
Column 1 - 100
Column 2 - 500
Column 3 - 100, 101, 102, ..., 500
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like:
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
i have a list of numbers in a column, and i have sorted it smallest to largest, now i wish to identify which ones are consecutive in the column.
5184730512
5184730547
5184730763
5184730766
5184730767
5184730836
5184731135
5184731136
5184731149
5184731212
5184731222
5184731389
with this Excel problem? I have a set of data of 300 some odd rows of numbers. I need to find 24 CONSECUTIVE values that add up to the HIGHEST sum? For instance,
2
2
0
0
4
2
0
0
1
8
5
2
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like;
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I am preparing a attendance sheet. I am using 1 & 0 for present(=1) & absent(=0). I want to find out if a student has been absent for three consecutive days and if there is three consecutive 0 then the formula should return the value 0 ( the student gets 0 if he is absent for 3 consecutive days ) otherwise it should add all the 1s in the row. i.e
1 1 1 0 0 1 1 0 = 5
10 0 0 1 1 0 0 = 0
I need a formula that will count the number of consecutive 3 0's from the following Data series. There are 22 such events.
0
6
15
[Code].....
I have the attached table of numbers and I need a formula at the end of each column to identify whether any cells in that column consecutively have numbers in them greater than zero. Ideally by a count of how many cells in the column have consecutive numbers greater than zero (so if there are three 1's in a row and then a zero and then another 2 1's I want it to count 5).Excel Help.xlsx
View 2 Replies View RelatedI have a spreadsheet that has a column of numbers some of which are consecutive, some of which are not. I would like to have a way to lump all of these chunks of consecutive blocks into ranges. For example:
2759
2760
2761
2762
2764
2765
2766
2768
2769
2773
would return something like:
2759 - 2762
2764 - 2766
2768 - 2769
2773
Any ideas?
I'd like to take data in the range from B2:B500 and in C2 sum from B2:B9 and then in C3 sum from B10:B17 and in C4 sum from C18:C25 and so on.
View 2 Replies View RelatedI have got the following issue. I have got a large list of values in a column. I need to detect the the ones which are in non-consecutive order and display the difference in single numbers. For example:
1 fine
2 fine
3 fine
7 - 4,5,6
10 - 8,9
In other words I need to find the missing values and get them displayed.
The first of two consecutive numbers with exactly two simple denominator are:
14 = 2 × 7
15 = 3 × 5
The first of three consecutive numbers with exactly 3 simple denominator are:
644 = 2 × 7 × 23
645 = 3 × 5 × 43
646 = 2 × 17 × 19
I need to write a program that finds the first four consecutive numbers that contain exactly four simple denominator.
I have 2 Columns. One column represents calendar dates and the other column represents numbers between 0 and 7.
Therea re 10000 rows in this table.
I would like to count how many consecutive days I observe certain numbers numbers ( i.e 3+, 4+, 5+, etc)
I have an interval, for example [1431, 1589] an I need to automatically generate consecutive numbers in this interval - for example 1431.1 , 1431.2 ..... 1588.8, 1588.9, 1589. How can I do that? I know I can do this manually by writing some values and drag down but I need this done automatically.
to create with the default excel functions the following calculator. I need to calculate the maximum number of positive numbers which happen in a row and the maximum number of consecutive negative numbers. For example in the following list of numbers there are a maximum of 7 consecutive positive and a maximum of 6 consecutive negative numbers:
6 000
6 360
6 742
7 146
7 196
7 628
8 086
-4 071
7 898
-4 186
8 121
8 608
-4 562
to make a formula which will calculate the maximum length of positive and negative numbers in a row? I attached this table to the post.
I have a column with many different names and want to put a number at the end of the name. Is there an excel formula that can do this? For example:
ColA
BUY
BUY
BUY
BUY
BUY
BUY
SELL
SELL
SELL
SELL
SELL
SELL
SELL
SELL
SELL
SELL
KEEP
KEEP
KEEP
KEEP
DESIRED RESULT:
BUY 1
BUY 2
BUY 3
BUY 4
BUY 5
BUY 6
SELL 01
SELL 02
SELL 03
SELL 04
SELL 05
SELL 06
SELL 07
SELL 08
SELL 09
SELL 10
KEEP 1
KEEP 2
KEEP 3
KEEP 4
As you can see, if the number of consecutive texts goes over 10, I need it to add a "0" onto the beginning of the number.
I am trying to create a column which lists numbers consecutively from 1 - 10,000, grouped in intervals of 20 (ex: 1 - 20, 21 - 40, 41 - 60, 61 - 80, ...) without having to enter them all manually. Is there anyway to do this in Excel?
View 3 Replies View RelatedColumn C is the tricky one. It comes from the bank and somewhere in there is a 4-digit tenant reference. I did a formula to try and isloate it and it worked on most but if you look at the very first row, there is a spurious 99 in there, so it didn't work. Is there a way of EXTRACTING the first four consecutive numbers and placing them in another cell?
I have a 'Customer Quote' template form which requires a new number every time it gets saved, this will need to be a 'read only' file.
Can I also have it auto name itself this consecutive number automatically every time it is 'saved as'.
formula to identify consecutive numbers in order, but having trouble figuring out how to identify consecutive numbers in random order.
Cell M1,N1,O1,P1, and Q1 each have a number, 1,4,9,3 and 7.
We have 3 and 4 being consecutive number but they are not in order, would like help in a formula to put a 1 on an empty cell S indicating that there is a consecutive number with a 1 if there are no consecutive numbers then it would give a 0.
The current formula only works if the consecutive numbers are in order, 1-2, 3-4, 5-6, etc...
=IF(SUMPRODUCT(--(N1:Q1-M1:P1=1)),1,0)
I have set up a spreadsheet template that automatically populates specific values through the spreadsheet based on what the value of cell "A1" is. I want to run through 224 potential values in cell A1 and print out the worksheet after each potential value.
My thought on how to approach it is to write a macro that:
1. Selects the next item from the drop down box in cell A1
2. Prints the page (using default print settings)
3. Loops
But I don't know what the code would be. Cell A1 also does not need to be a drop down box, as long as it incrementally runs through all 224 listed values and prints after each one.
What I am trying to is to count the number of times a certain number or character appears (either on its own or in a batch of consecutive cells containing that number/character) in a column.An example might clarify things (for reasons of brevity I will write the columns in rows):
If a column looks like (each 1-digit numbers / characters being a consecutive cell) 0 0 X X 0 0 X and I am counting for X, then I should get 2. If my column is X X 0 X X 0 X 0 0, then I should get 3. If my column is 0 X X 0 0 X 0 then I should get 2. If my column is X X 0 X X 0 X then I should get 3. Is there a formula to perform that calculation?
If n = 5, then I want to generate a string like this: "1+2+3+4+5". Similarly, if n = 7, I want the string "1+2+3+4+5+6+7".
I can generate the consecutive numbers, but have not figured out how to generate the required string.
I need find consecutive Numbers in a singles Cell but each numbers have a leading zero and "-" (Dash)
My problem is that the UDF that i found on this forum, is for numbers with out leading zero with comma ",",
So even if change the "," by "-", still getting a error Because the Code is designed to Read numbers Formats different than mine..
My Numbers are located in Cell G12 (down), and the message that i need to show in the cell result is :
If Found :
0 Consecutives --> 0
2 Consecutives --> 2
3 consecutives --> 3
4 consecutives --> 4
5 consecutives --> 5
2 Set of consecutives --> 2S
Example of 0 consecutives --> 01-04-07-12-25-30
Example of 2 consecutives --> 01-02-07-12-25-30
Example of 3 consecutives --> 01-02-03-12-25-30
Example of 4 consecutives --> 01-02-03-04-25-30
Example of 5 consecutives --> 01-02-03-04-05-30
Example of 2 sets of consecutive s --> 01-02-07-12-25-26
BTW my numbers start on Cell G12 down..
______G12_______
01-02-03-20-21-25
Let's say I have a column A with the following values.
30
40
30
60
-20
-10
-50
-60
-70
120
320
20
-40
-30
40
How can I have 2 cells display:-
i)highest streak of positive numbers = 4
ii)highest streak of negative numbers = 5?
Also, how can I have another 2 cells display:-
iii)the sum of the highest streak of positive numbers = 160
iv)the sum of the highest streak of negative numbers = -210
