Copying 193 Rows Yet Referencing Consecutive Cells From Different Sheet
May 1, 2013
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
View 1 Replies
ADVERTISEMENT
Mar 4, 2009
I tried to save a macro but it doesn't work (I am inexperienced!).
What I need is to copy five columns (e.g. range C:G) and copy it in another sheet ('1' range C:G). Subsequently, I have to copy the next range of five columns available (i.e. range H:L) and copy it in the consecutive sheet (i.e. '2' range C:G), and so on.
View 14 Replies
View Related
Jun 2, 2009
i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...
View 9 Replies
View Related
Mar 18, 2008
I need to take every 4th data point from an array of several hundred (col A) and place the reduced array in a new column (col B). I initially tried approaching this in VBA and then tried excel, but to keep it simple i won't show the code that didn't work.
Col A Col B
5.001 5.001
5.002 5.802
5.001 5.951
5.003
5.802
5.805
5.801
5.804
6.951
6.950
6.952
6.951
View 3 Replies
View Related
Feb 26, 2013
I am working on two worksheets. On my first worksheet I have one column with consecutive numbering starting from Cell 8.
A8 = 1
A9 = 2
A10 = 3
A11 = 4
A12 = 5
On my second worksheet I want to link to the values in the first worksheet but not in a consecutive manner. Each number will have an interval of 15 cells. As shown below:
D15 = 'link on Sheet1!A8'
D30 = 'link on Sheet1!A9'
D45 = 'link on Sheet1!A10'
D60 = 'link on Sheet1!A11'
D75 = 'link on Sheet1!A12'
View 6 Replies
View Related
Mar 10, 2014
B+N Total sheet is where the data is and the decider is Column 'AF' which is already formulated and has 2 options: 'MMS' or 'Retail'.
I'm trying to write a code which needs to do:
If B+N Total sheet's AF Column has 'MMS' then copy that row and paste it into ADI MMS consecutively.
Just like the example attached Row 2,3,5 is MMS and not row 4. So I'm trying to get those rows in periodical order as Row 2,3,4 into ADI MMS Sheet.
View 3 Replies
View Related
Jan 16, 2010
I'm trying to create a formula (in Sheet 1) that will return the most recent number of cells containing a value (i.e. not empty) in Sheet 2 Range AD2:A367 greater than zero.
I've tried using COUNTIF but that only adds the individual values, it doesn't 'start from zero again' when a zero value appears.
View 9 Replies
View Related
Aug 12, 2008
I need to be able to auto fill, on sheet two,cell references for every 26th entry. Below is an example of what I would like it to be able to do with the drag, auto fill.
View 8 Replies
View Related
Jan 15, 2014
I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.
My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?
View 3 Replies
View Related
Oct 4, 2009
I need assistance referencing cells in other sheets. I have a summary tab which I would have each refenced sheet listed (named for the activity being billed). In a separate cell in the summary tab, I want to bring back the value of the total amount billed for that activity. The total value is in the same cell of each sheet, as all invoice tabs needing to be referenced are identical in layout.
There is one hitch to this, the sheets referenced have not yet been created (that would be too too easy), and the activity list in the summary sheet has place holder names that will change when the activity being billed is defined (hence prompting the biller to create the sheet to be referenced).
View 5 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Oct 28, 2008
I have a workbook that has a number of sheets with various project stages and dates on them. These details are arranged in small tables displayed vertically down the page. Each worksheet's name is the project code - e.g. 30033_99
I have now been asked to create an overview page that displays all these stages and dates on one page. What I'm trying to do is get Excel to look at the column with the project code and then pull information from the worksheet with that name.
View 4 Replies
View Related
May 22, 2014
To be more specific, I work with highway signs, and they all have codes. the codes are priced according to their size, sheeting, and aluminum structure.
so codes can be something like : GS-4, IB-12, RB-21, and their sheeting could be: 231, 241, 245S, 420P, and their price is dependent with the size, materials, and quantity ordered. So a quantity of 3 or less of a flat sheet of aluminum, with HIP reflectivity sign would be a 231, where 4 or more of that same sign would be 241.
A workbook has the contracted price, the cells are in order. The order sheet I use is separate from this. But I have to look for each sign for all the info. How can I get the one cell to recognize the Code, along with the Quantity ordered?
View 2 Replies
View Related
Jan 19, 2009
I have a sheet which I want to populate from another sheet within the same workbook.
I am using the following, where Data = original worksheet, T2=cell to be displayed:
=Data!T2
When i do this for the whole spreadsheet, where there are blanks it is entering "0" or in the date fields, 01/01/1900.
Is there any easy way of defaulting them to be blank if there is no content in that cell?
View 9 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Jul 30, 2013
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
View 3 Replies
View Related
Aug 2, 2007
what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?
I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.
View 9 Replies
View Related
Feb 23, 2007
i am trying to copy rows from several worksheets into one master worksheet. if column F of any row has a value greater than zero then the rows should be copied to the master worksheet with all data.
View 5 Replies
View Related
Jul 22, 2014
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
Example file :
Attachment 334122
Alternative link [URL]
View 1 Replies
View Related
Sep 1, 2009
I have one excel 2007 workbook with three sheets in it.
Sheet 1 is a master sheet with 1858 rows and 45 columns of data.
Sheet 2 has the qualifier data, that is, one column with 255 unique 6-digit integers each in its own cell.
Sheet 3 is a result or output sheet that is currently empty.
Here is what needs to be done.
Compare all of the 255 unique 6-digit integers from Sheet 2 with the integers in column number 15 (or Column O) of Sheet 1.
If there is a match then copy that entire row from Sheet 1 into Sheet 3.
View 9 Replies
View Related
Oct 20, 2009
I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
View 9 Replies
View Related
Feb 27, 2014
I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.
[Code].....
View 14 Replies
View Related
Dec 18, 2013
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies
View Related
May 21, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 9 Replies
View Related
Feb 23, 2012
Im using the below formula to paste information into a new spreadsheet based on the if then statement. However, as i paste the formula down the sheet, it doesnt reference all the cells. The formula stays on the cells it referenced initially. How can I make the formula reference all the cells as i drag it down?
=IF('[All Cases ATL.xlsx]New_All_Case'!$C$2="DA1",IF('[All Cases ATL.xlsx]New_All_Case'!$T$2="A",'[All Cases ATL.xlsx]New_All_Case'!$E$2,""),"")
View 3 Replies
View Related
Mar 11, 2009
I would like to be able to copy a group of cells from sheet 1 to sheet 2 or 3 based on a value in another cell on sheet 1 eg
sheet 1
If Cell A1 = 24, A2=London Road (this make up an address), A5= omit
If A5 = omit I would like the address copied to sheet 2
If A5 = Complete I would like it copied to sheet 3
I have 1600 address to go through.
View 6 Replies
View Related
Feb 14, 2007
I am trying to do a loop to go through all the sheets in a workbook (11 ina all) that will copy all the cells and paste special value. below is the code i am trying to use and it is giving an error.
For Each sheet In ActiveWorkbook.Sheets
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Next sheet
View 9 Replies
View Related
Oct 21, 2006
Macro written below gathers information from the source xls documents (which are located at "D:anetdata" ) and copy a new file ( located at "D:anet arih" ) according to different contents of two cells. Unfortunately macro copies solely Column A. But I want to copy entire rows between those cells. For example, if A400 contains "Days with most messages" and A500 contains "Subjects with most answers" , this macro copies cells between A401 and A499. But I want to copy entire rows between 401 and 499.
Sub EvrenYurdakuloglu()
Dim DosyaDuzeni As Variant
Dim GuncelSayfaAdi As String
Dim Hucre As Range
Dim ikinciAranan As String
Dim ilkAranan As String
Dim ilkDosya As Variant
Dim ilkSatir As Long
Dim islemAdedi As Long
Dim i As Long
Dim KlasorunYolu As Variant
Dim KlasorYolundakiDosyalar As Variant..................
View 4 Replies
View Related
Apr 15, 2013
I have 5 Sheets titles Quote 1, Quote 2, Quote 3, Quote 4, and Quote 5, and One Sheet called DataQuote. There s a qty column on all 5 Quotesheets at D7:D62. So that if i was to put a numerical value in that column From any of those sheets I need to Put on the DataQuote the Following:
Say i Have a quanity 5 on quote 3 on cell D9.
On the Data sheet I need to Show in A10 The Name of the Sheet, then stuff from Quote 3 A9:F9 in C10:H10.
alternatively if i went back and put something on Quote 1 Put those values in the above range moving down stuff from quote three, automatically updating itself.
View 3 Replies
View Related
Jun 9, 2006
I browsed through the other posts concerning copying and couldn't find (or maybe I didn't just understand) how to do what I want. I looking for a macro for a comand button that when pressed copies certain cells in the active row to another sheet. I recorded a macro for what I wanted to do ( to make the explenation easier) for one row but even the recorded macro refuses to work.
I'll put the recorded macro here if it helps someone, but as I said even that doen't work
Private Sub Kopiering_Click()
Range("E3").Select
Selection.Copy
Sheets("TOTAL").Select
Range("K3").Select
ActiveSheet.Paste
Sheets("BRL Newbuilding").Select
Range("D3").Select
Application.CutCopyMode = False
Selection.Copy
View 8 Replies
View Related
