I have data that I received from a feed. Each cell displays a value like 100, 200 or 300 or a time like 10:41:52 AM, but the formula bar depicts the array information ie =Q|TS!'AVAVA,45000,DEIPSCT'.
I'm working with the data where basically the time is the independent variable and the number is the dependent, very basic stuff BUT I cannot figure out how to reference the time.
Just trying to write a very simple if function such as =IF(G17="8:50:17 AM","start") and I can't figure out how to do it. Cell G17 is showing 8:50:17 AM.
CPM is a calculated field that uses the formula =cost/(impressions/1000)
The problem is that the numbers in the CPM field are not, in practice, the results of that formula. They are averages (since it's a data field, I had to choose whether it was to be a sum, average, etc.). This means that, for example, the CPM 4.5 on the first row is not a calculation using the two numbers to its left. It is the average of the output of thousands of calculations done on the raw data, in which every line item with a productname of product1 had its CPM calculated, and then all those output CPMs were averaged together.
This is not what I want. I want a field that calculates based on what's already in the pivot table. So that the formula would be more like:
My problem is I have a field when imported occasionally has a #Value! error in it. Most of the records are fine. As I will be importing it into another DB I need to have the #Value! removed and replaced with a Zero. Here is what I tried. I have a field that is displaying a #value! error. In another field that is referencing that field I wanted to do the following if statement. Basically if that error value is displayed show a zero, else show the value of the square. (Note I also tried it with an IIF but got a # Name? error)
If((Q2) = "#Value!",0,(Q2))
Or should I be looking for an error? When I ran it, It basically gave me the value of the Q2 field.
If((Q2) = Error(#Value!),0,(Q2))
Or is there some other way to get around the error?
I have a worksheet ("VillageReport") that contains several pivot tables. All tables are from the same data source and all pivot tables have "Location" as the first column field. I would like for the tables on this sheet to automatically be filtered when I select a village name from a drop down menu in a cell on this worksheet (C1). So, for example, when I select "Tarzana" in C1, the location field of all pivot tables on this sheet will show only Tarzana (all others are deselected).
a Macro for this? (I have already set up the drop down menu in C1). I have found some examples online but can't seem to adjust the code to fit my workbook. I am not very familiar with VBA.
I am trying to create a macro that will change all pivot fields with a certain name to the value I have the master pivot changed to. For example, I have 5 pivot tables, which each contain the field "Fruit". I want to change the 1st pivot table to "Apples", "Oranges", and "Pears" as active values, and then run the macro, making the other fruit fields also have these values. I can do it for single items, but when I need to do multiple items, I get an error message. I'm not sure how to write in VBA in order to do this.
The macro I have has 2 arrays that at present has a representative sample of the data I will be looking for and hence allocating a relevant code. I thought the if MyArr was now Sheets("Sheet2").range("A1:A200) and similarly for MyAssettype using column B. however i just get a Runtime error!
I have this MAXIF array function that I am trying to use but I need it to reference the Last Row and not the absolute refererence. I am a novice at VBA. The first max if array is the one with my effort to try and get the last row. It doesnt work. The second one works but references the cell.
In cells A1 to A4 I have 4 numbers (8,7,12 and 15). In cells B1 and B2 are the numbers 1 and 4
Now I want to use the max function to find the highest value in the cells A1 to A4. But instead of typing =max(a1:a4) I want to use other cells that tell excel where to look. What I exactly want is to say =max("a"&B1:"a"&B2) because in B1 and B2 the rows are indicated from which to which excel shall find the maximum.
I'm having a problem with the below array. The column heading in cells E7:H7 Never change and i would like to sum up the appropriate data below those headings according to the what is in cell D4. The formula in cell A9 works but only if the string is exactly the same as what is listed in cell D4. Is there a way to reference cell D4 like i have in cell B9. I'm looking to get the formula in B9 to work, but i'm missing something.
Sheet1
ABCDEFGH2Assumptions 3Collateral Sample 1{60;90;FCL} MACRO Populates 4Collateral Sample 2{90;FCL} {60;90;FCL} 5Collateral Sample 3{FCL} 6Collateral Sample 4{60;90;FCL} 7 Current6090FCL8 990 123410200 658711360 4682212 Spreadsheet FormulasCellFormulaA9{=SUM(IF($E$7:$H$7={60;90;"FCL"},$E9:$H9))}B9{=SUM(IF($E$7:$H$7=$D$4,$E9:$H9))}A10{=SUM(IF($E$7:$H$7={60;90;"FCL"},$E10:$H10))}B10{=SUM(IF($E$7:$H$7=$D$4,$E10:$H10))}A11{=SUM(IF($E$7:$H$7={60;90;"FCL"},$E11:$H11))}B11{=SUM(IF($E$7:$H$7=$D$4,$E11:$H11))}Formula Array: Produce enclosing { } by entering formula with CTRL+SHIFT+ENTER!
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I need to sum the Time field, if the Temp Zone is = F. My problem is, as shown on the sheet, there are multiple days. As well, I need to pull the information for the totals (looking at 6 days worth of info) into another worksheet where the names (first column) are not in the same order, as some of the names are on this sheet, and some are not. I had a massively large vlookup statement, but of course, it's rather large and doesn't copy over well (when changing the days, it looses the last couple of lookups) ......
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
What i need is to be able to concatenate a field such that it includes current system year,month,day and time. My attached spreadsheet illustrates my current formatting to achieve year,month,day. But I seem to be challenged in getting the current time to display properly.
I have a list of dates with an hour inside them . I am trying to remove teh hour from the field , and leave only the date. teh format option just hide teh hour but not removing it how can it be done ?
How can I have a form field automatically fill some aspects of the data that's input? I've seen it before, like a phone# field automatically including the dashes.
I would like to automatically include colons in a time field. So if I were to type "081500" (or even "81500"), it would complete it as "08:15:00".
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code: Dim chkConfirmRw, LastNameRow As Integer For chkConfirmRw = LastNameRow To 1 Step -1 'Compare the current cell to the one below it 'If they don't match, insert a row row below the current Row If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown End If 'Decrement the counter and do it again Next
figuring out a formula to count the number of occurrences within a date range (the month of October) however, the date column is formatted to mm/d/yy 00:11:22 PM/AM.
I tried using =COUNTIFS(B4:B96,G3:G9611/1/2008) but got an error.
This is what I'm working with (there are other occurrences for Nov and Dec in the spreadsheet - this image only shows Oct)
Site Statistics
October-December 2008
Visitor No. IP Address Operating System Browser Site
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
I have obtained the following data which I need to put into a spreadsheet to import into an accounts program. I can't change the way I get the data which is as follow
Hrs worked Rate 05:55:00£30.00/Hour 07:40:00£21.00/Hour 05:45:00£30.00/Hour
What I need to have is 5.92 30.00 7.67 21.00 5.75 30.00 ie the time format in decimal and loose all the unnecessary symbols etc for the rate
In the "Pivot Table Field List" I have the option to "Choose fields to add to report". I have a large number of fields that I want to choose and "Add to Values" - so it is tedious to select each item individually.My question: Is there any possible way select multiple fields at the same time? e.g.
a "select all" option, orhighlighting a range of the available fields (either by dragging or holding the shift key)I've looked / tried above with no luck.
Any Excel Add-Ins out there that might address this? I'm fearing not since my searches have come up empty.
In the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
I have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
I have a tab called 'Tab1' in which I have column called 'Col1' and 'Col2'.
I have another tab called 'Tab 2' with columns 'ColA' and 'ColB'. When I enter a text in Col1(Tab1) I would like that text to be compared to data in 'ColA' from Tab 2 and when match found then get the corresponding value from ColB and autopopulate it in Col2 of Tab1.
I am trying to count the number of times that data is in a field and in any field the date is greaert than today's date. This date field could be blank and that is where I am having the problem.
This workbook is designed to prompt the user with inputboxes allowing them to enter a name, hyperlink a file to that name, and then a date. Next all the drawing names are read into an array and stored. Along with some minor sheet formatting, this is what happens when the button "Add Drawing" is clicked.
Next, when the button "Revise Drawing" is clicked, the user will be prompted with an inputbox for a drawing name. This name will be compared to the names in the array. If the name is found, the row containing that drawing will selected and the user will be prompted to update the hyperlink, then the "drawing date" will be moved to the right by one column, then the user will be prompted for another date replacing the date that was moved. The first sequence of commands or button works fine. The button "Revise Drawing" prompts the user with the inputbox requesting the revised drawing name, then develops the runtime error 1004.
I found quite a few posts about this problem, but none of the answers was any use to me. I need to redimension a 2 dimensional array in a Sub. I deleted all the code that is not of interest:
