Userform With Time Field Displays Time As Number
I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Add This Number To The Start Time, Factor In Break Minutes And Get To The Projected Completion Time
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View Replies!
View Related
Count Number Of Full Time Periods Within A Time Period
I have thousands of timestamps that have a start & end date and time in 2 separate columns. (one named start and one named end...) I also have numerous set time periods that i'm interested in.. (about a dozen or so) for example 01/01/2008 - 05/01/2008, 07:30:00 - 10:00:00 What i need is to be able to count the number of times the full time period i am interested (07:30:00 - 10:00:00) in falls in between the thousands of start and end timestamps i have. The time periods must also fall within the date range specifed. So if my timestamps were Start: 01/01/2008 06:30:00 & End: 02/01/2008 11:00:00, based on the set time period above, there would be a count of 2 and if my timestamps were Start: 01/01/2008 07:05:00 & End: 02/01/2008 09:00:00 there would be a count of zero as there is not a full uninterupted timeperiod 07:00:00 - 10:00:00 between these timestamps. and if my timestamps were: Start 01/01/2007 07:00:00 & End 02/01/2007 10:00:00 the count would be zer as this is a year early!
View Replies!
View Related
Convert Number To Time & Decimal Time
I need to separate a list of times from a telecommunications bill. I have 170,000 line of data. The Times are represented as below. eg 46 46 Sec 59 59 Sec 100 1 Min 159 1 min 59 sec 200 2 mins 502 5 mins 2 sec 1256 12 mins 56 sec 3456 34 min 56 sec. How do I separate them to a decimalized per min value.
View Replies!
View Related
Date/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub "dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
View Replies!
View Related
Subtracting A Field That Has Time
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5 Do i need to reformat the TIME column into something different? ....
View Replies!
View Related
Sum The Time Field And Vlookup
I need to sum the Time field, if the Temp Zone is = F. My problem is, as shown on the sheet, there are multiple days. As well, I need to pull the information for the totals (looking at 6 days worth of info) into another worksheet where the names (first column) are not in the same order, as some of the names are on this sheet, and some are not. I had a massively large vlookup statement, but of course, it's rather large and doesn't copy over well (when changing the days, it looses the last couple of lookups) ......
View Replies!
View Related
Referencing Time In An Array Field
I have data that I received from a feed. Each cell displays a value like 100, 200 or 300 or a time like 10:41:52 AM, but the formula bar depicts the array information ie =Q|TS!'AVAVA,45000,DEIPSCT'. I'm working with the data where basically the time is the independent variable and the number is the dependent, very basic stuff BUT I cannot figure out how to reference the time. Just trying to write a very simple if function such as =IF(G17="8:50:17 AM","start") and I can't figure out how to do it. Cell G17 is showing 8:50:17 AM.
View Replies!
View Related
Concatenate A Field With Date And Time
What i need is to be able to concatenate a field such that it includes current system year,month,day and time. My attached spreadsheet illustrates my current formatting to achieve year,month,day. But I seem to be challenged in getting the current time to display properly.
View Replies!
View Related
Display End Time Automatically Upon Entering Start Time And Time Usage
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View Replies!
View Related
Automatic Time Format In Form Field?
How can I have a form field automatically fill some aspects of the data that's input? I've seen it before, like a phone# field automatically including the dashes. I would like to automatically include colons in a time field. So if I were to type "081500" (or even "81500"), it would complete it as "08:15:00".
View Replies!
View Related
Userform Time Card
I am trying to put together a userform based time card calculator. User inputs the time in the time out and how long of a lunch. Then the program will display total hours worked for the day. Ive attached what I have so far. The only thing that is not very clear is that I have one hidden textbox for the lunch. It is there only for calculating and the visible one is going to inc by :15 min.
View Replies!
View Related
Date And Time Picker On UserForm
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact. When I play the userform I get a error stating: "Compile Error-Method or Data member not found" Below I have added the code and it shows in red where the problem is. Private Sub UserForm_Activate() PSA.Text = Cells(lCurrentRow, 2).Value cboTypeofContact.Text = Cells(lCurrentRow, 3).Value DateofContact.Text = Cells(lCurrentRow, 4).Value TimeofContact.Text = Cells(lCurrentRow, 5).Value End Sub I am not sure what to put in its place.
View Replies!
View Related
Running Date And Time On Userform
Here is the code for my user form. Private Sub UserForm_Initialize() TextBoxDate.Value = Now TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss") End Sub This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it. I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
View Replies!
View Related
Creating A Time Zone Userform
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example). I am trying to work out what would be best. Would it be possible to create this on the Status bar? Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
View Replies!
View Related
UserForm - Only One Button Toggled At A Time
I have made a UserForm with 12 buttons on it to switch between 12 different Worksheets and I am attempting to have the button pressed down only when the sheet is active. The buttons all work fine and go to the right sheet, but will stay toggled when I click on a button for another sheet. I have tried to create a seperate macro that makes all the ToggleButton.Value = False, but this just activates the ToggleButton_Click() macro each time and loops on and on. Is there a way to change the value of the toggle without initiating the click subroutine? Do I even want to use ToggleButton?
View Replies!
View Related
Convert Time To Minutes In Userform
I know how to do this in a worksheet: =(b1-a1)*1440. B1 being the end time and A1 being the start time. I have a userform where the start time and end time are entered in text boxes. txtstart1 and txtend1. I would like the result to show up in txtmin1. Here is my code that doesnt work. I tried to convert code from a non-time sheet of mine. Dim as Integer may be the problem, I just learn as I go, and so far have only dealt with Integers.
View Replies!
View Related
Time (clock) Times A Number= Very High Number?
I have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent) On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
View Replies!
View Related
Automatically Close UserForm After Time Period
I have the following code in a simple userform containing only a label: Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long) Private Sub UserForm_Activate() DoEvents Sleep 4000 Unload Me End Sub When I invoke this as a single macro in a blank workbook and immediately change focus by pressing ALT+TAB to enter NotePad the userform is shown and exits normally after 4 seconds. However, when I issue this code from within a larger macro, and hit ALT+TAB to Notepad, the excel application hangs on the displayed userform until I click back into Excel. If required, I can happily send you the code as an attachment.
View Replies!
View Related
Add Comboboxes On Userform At Run Time
I have a userform that has a text box. If user puts a number in it and click on proceed the userform must expand and display that many comboboxes. for e.g. if user inputs 8 and then click on proceed then there should be 8 comboboxes on the form. Is it possible to do?
View Replies!
View Related
Adding Code To A Userform At Run-time
The ultimate goal is to create a Userform at run-time. The problem is writing event code for that Userform. The current situation is: I have a userform. (Created with the VBE, not at run-time.) There is one command button on that userform. The code module for that userform is this Option Explicit ...
View Replies!
View Related
Run Time Error When Calling Userform
I am getting a run time error # 9 when I run a macro that calls a Userform or when I try to run code in a Userform module. The code performs beautifully on my computer, but it did not work on a coworker's computer. It ended up working on 3 out of the 5 computers I have tried it on. I have tried changing security settings to low, and a bunch of other stuff, but I cannot get the code to run on the computers that get the run time error on them when I try running the code on them. I get the run time error when I try to load or show any userform in the workbook and I get it if I try to run code that is in the userform module. However, if I paste the code into a regular module and run it, the code runs fine. Does anyone know what could be causing this? I don't think my code is causing the problem since it runs on some machines, I am guessing there is a setting that is preventing Excel from calling Userforms. I have a button, Private Sub CommandButton1_Click, on a sheet that shows a userform. This is the bit of code that gets tagged with the run time error. The userform has a refedit control on it allows the user to select a cell and then hit ok to run the code or cancel to, well, cancel it. Code for the button that gets tagged with the run time error: Private Sub CommandButton1_Click() frmLoadTrade.Show 'calls userform End Sub Code in the Userform Module: Private Sub cmdCancel_Click() TradeTicketSpreadsheetName = ThisWorkbook.Name Unload Me Workbooks(TradeTicketSpreadsheetName).Activate End Sub
View Replies!
View Related
Add Controls To UserForm At Run-Time
I am trying to transfer data from a worksheet to a user form, so that the end users can edit the data on the user form, save it, and the revised data is sent back to the worksheet. since the worksheet data is dynamic, i am trying to dynamically add controls in the user form. but the form displays only one data. Set sdel = Sheets("Deliverables") Set rStartCell = sdel.Range("A65536").End(xlUp).Offset(0, 0) counter = Mid(rStartCell.Address, 4) dummy = 0 cnt = 1 'copy data from sheet to the user form With sdel 'checking if deliverables sheet has any data ' If .Range("A3") <> " " Then Exit Sub ' MyTextBox.Caption = .Range("A3").Value For r = 3 To counter If .Cells(r, 1) <> "" Then Set MyTextBox = Controls.Add("Forms.Label.1", "lbl" & cnt, Visible) MyTextBox.Top = topadd + 30 MyTextBox.Left = 20 MyTextBox.Width = 150 MyTextBox = .Range("A" & r).Value cnt = cnt + 1 Else dummy = dummy + 1 End If Next r End With
View Replies!
View Related
Copy Data From Userform To Sheet, On A New Row Each Time
I have designed a userform that allows teachers to input assessment grades and calculate overall module grades based on these... I'd like to develop a macro that would then allow the teacher to click a "save" button on the userform, triggering the transfer of the information on the userform into the next sheet and then clear the contents of the userform ready for the next calculation. I have made an attempt; unfortunately I have very limited experience of Excel and am therefore running into difficulties; the macro is as follows: .....
View Replies!
View Related
Copy Row If DATE & Time In Cell Is Between Time Span
I have a problem regarding sorting data having date and also time within a single cell. Example data (I have written it as code to preserve formatting) A B C D E F 12/5/2008 02:072/5/2008 06:0128804833363 22/5/2008 18:012/5/2008 18:0599271297 Column B is start date and time whereas Column C is end date and time. My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
View Replies!
View Related
Automatically Change Cell (With Time) Color After Time Period Has Passed
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is: i) check whether they are in an input cell ii) if so, then prompt the user with the 'Font Color' dialog box iii) apply the font color selected to the input cell I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View Replies!
View Related
Skip Weekends Adding Time To Date & Time
I need a formula to add just the time to ' date and time', ignoring weekends. eg: Fri 24-Aug-07 10:52 is the date and time 28:48:00 is the time If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40 But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
View Replies!
View Related
Delete Date & Time Cells Based On Time
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too. I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have. Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
View Replies!
View Related
Automate Macro Start On Time & Stop At Later Time
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find) Private Sub Workbook_BeforePrint(Cancel As Boolean) If Sheet1. Range("A1").Value = "" Then MsgBox "Cannot print until required cells have been completed!" Cancel = True End If End Sub
View Replies!
View Related
Run-time Error Every Other Time The Macro Runs
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time. Every time I get the error, it highlights this line of Sheets("Regenerate Request").Paste This is all of the code up to where I get the error: Sub YesRegen() ' after user has hit Yes on the RegenerateRequest macro, this posts the new request to ' the log, generates the new file and attaches it to an email Application.Run "LogUnprotect" Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy 'Selection.Copy Sheets("Regenerate Request").Activate Application.Run "RegenFormUnprotect" Range("A40:K40").Select Range("A40").Activate Sheets("Regenerate Request").Paste
View Replies!
View Related
Calculating Time Owed Based On Time Worked
I know the title is a bit vague, but I cant think how else to word it! I have a sheet (attached) which works out hours worked, and if the amount is under a specified target, it counts how much time is owed. The problem occurs when someone works more hours than the specified target. I guess I need an IF formula of some kind, to say if the figure is over the target, to put zero in the hours owed column.
View Replies!
View Related
Calculate Processing Time With Fixed Time Paramaters
I am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View Replies!
View Related
To Calculate The Difference Between The Start Time And End Time
This may be a bit vague but here goes. I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30. Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00. If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
View Replies!
View Related
Adding A Time Offset Based On Time Of Day
I am replicating a Matlab program which calculates tide levels at different times of day. I need to replicate it in excel to speed up data analysis and I am nearly there. what happens is I need to apply a time offset to the time of high tide at port a based on the time of day, so if it is: between 00:00 and 06:00 the high tide at port b is 81.6 minutes after the peak at port a between 06:00 and 12:00 the high tide at port b is 74.56 minutes after the peak at port a between 12:00 and 18:00 the high tide at port b is 81.75 minutes after the peak at port a between 06:00 and 12:00 the high tide at port b is 79minutes after the peak at port a I tried this formula, where CO2 has the time/date of the high tide at port a: =IF(CO2<0.75,IF(CO2<0.5,IF(CO2<0.25,CL2+(81.6/(24*60)),CL2+(74.56/24*60)),CL2+(81.75/(24*60))),CL2+(79/(24*60))) The problem is the high tide on 07/01/2005 07:45 is read as 38359.32 rather than 0.32 - is there any easy way to tell excel I'm only interested in the time not the date? I have this spreadsheet setup now to do all the other bits required and i is just the timing that is a problem.
View Replies!
View Related
Converting Normal Time To Epoch Time Format
I'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format. Is there a function or vba code that I can use in excel to convert the normal time format to epoch time? I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
View Replies!
View Related
Copy N Paste Time Date/time Format
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View Replies!
View Related
|
TRACKER
