Subtracting A Field That Has Time
Jan 21, 2010
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
View 9 Replies
ADVERTISEMENT
Jul 11, 2009
How can I change the ....
View 14 Replies
View Related
Apr 9, 2012
Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
View 1 Replies
View Related
Jan 30, 2007
I have three cells... A1= entry time & H1 exit time...both are formated as such Custom #0":"00 so i don't have to enter the colon with every entry and exit time... my issue is that i want the third cell to count the minutes in cell A1 & H1...
View 9 Replies
View Related
Feb 15, 2008
I saw this answered somewhere on here but really didn't understand.
I'm trying to set up a sheet for my hours worked for the week.
I have the total per day in H2 through H6 In I2 through I6 I have an accumulative total for the days, so assuming I work 8 hours a day, I2 would be 8:00 I3 would be 16:00 I4 would be 24:00.
In J2 through J5, I'd like to have the weekly accululative worked hours subtracted from 40 so that the total is what I have left work until I hit 40.
View 9 Replies
View Related
Jun 25, 2009
Here's a simple one guys. How do I subtract 7:30 AM from 4:00 PM to give me 8.5 hours? At the moment it returns either 8:30 AM or (formatted Number - General):
0.3541667
View 9 Replies
View Related
Mar 12, 2009
I need 15 minutes removed from a difference in time, if the time span falls over 9:00 am through 9:15 am.
I'm inputting time like 8:30:00 in A1 and 10:30:00 in A2, then calculating the difference in A3 (2:00:00). Is there a way to remove 15 minutes from that 2:00:00, since it falls over 9 to 9:15?
View 11 Replies
View Related
Apr 17, 2012
I am trying to subtract 45min from the time 00:05, but the result i am getting is 0:40 which is wrong.
I am using below formula.
=TEXT(ABS(B3-$A$3),"-h:mm")
Actual timeTime minusResults00:0500:45-0:40
View 1 Replies
View Related
Jun 18, 2012
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55
In E1 will be the arrival time, 23:59
In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
=IF(E1="NA",0,IF(E1="n/a",0,E1-C1))
View 9 Replies
View Related
Jan 23, 2008
I have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
View 9 Replies
View Related
Jan 6, 2014
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
View 5 Replies
View Related
Oct 6, 2009
I have a working week that starts at 07:00 on a Monday morning and finishes at 14:30 on a Friday afternoon.
For planning purposes I need to know at any given point how many working hours are left. The reason for this is so that I can multiply that figure by the amount of Engineers available which will give me the amount of Man Hrs left in the week.
For example - if it is 11:00am on the Tuesday, how many working hours are left ....
View 13 Replies
View Related
Oct 21, 2009
How can I add/subtract time entered as 1830 to give a decimal value?
Start=1830
Finish=2000
Time between = 1.5
Also, how can I convert time as 1830 (24hr) to 12hr time? ie. 0630.
View 3 Replies
View Related
Oct 17, 2011
I've tried a number of examples but I can't seem to get it to work. the desired results in column C.
10/17/11 12:00 PM10/17/11 1:00 PM1:0010/17/11 12:00 PM10/17/11 9:00 AM(3:00)10/17/11 12:00 PM10/16/11 9:00 AM(27:00)
View 4 Replies
View Related
Dec 8, 2009
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
View 3 Replies
View Related
Mar 2, 2012
My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
2012 02 17 11:18:59.050|081,999999999999~999999999999
2012 02 17 11:18:59.550|082,MCTO05222CZ0~999999999999
2012 02 17 11:18:59.566|082,1
2012 02 17 11:19:00.144|083,MCTO05246CK0~999999999999
2012 02 17 11:19:00.160|083,3
View 9 Replies
View Related
Jun 26, 2008
I am trying to subtract 12 business hours from a date/time stamp. It has to be during working hours however which are 8AM - 5PM, Monday-Friday.
For example if my value is 6/23/2008 9AM
Subtracting 12 business hours would give me 6/19/2008 3PM.
View 9 Replies
View Related
Apr 8, 2007
formula to work out a variance between two times
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1
i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
View 9 Replies
View Related
Dec 24, 2008
I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
View 10 Replies
View Related
Mar 21, 2007
I need to sum the Time field, if the Temp Zone is = F. My problem is, as shown on the sheet, there are multiple days. As well, I need to pull the information for the totals (looking at 6 days worth of info) into another worksheet where the names (first column) are not in the same order, as some of the names are on this sheet, and some are not. I had a massively large vlookup statement, but of course, it's rather large and doesn't copy over well (when changing the days, it looses the last couple of lookups) ......
View 20 Replies
View Related
Jun 5, 2009
What i need is to be able to concatenate a field such that it includes current system year,month,day and time. My attached spreadsheet illustrates my current formatting to achieve year,month,day. But I seem to be challenged in getting the current time to display properly.
View 4 Replies
View Related
Dec 8, 2011
I have a list of dates with an hour inside them . I am trying to remove teh hour from the field , and leave only the date. teh format option just hide teh hour but not removing it how can it be done ?
View 4 Replies
View Related
Mar 19, 2013
I want to display a date and time in local time, is there a simple formula to do this?
View 3 Replies
View Related
May 8, 2009
I have data that I received from a feed. Each cell displays a value like 100, 200 or 300 or a time like 10:41:52 AM, but the formula bar depicts the array information ie =Q|TS!'AVAVA,45000,DEIPSCT'.
I'm working with the data where basically the time is the independent variable and the number is the dependent, very basic stuff BUT I cannot figure out how to reference the time.
Just trying to write a very simple if function such as =IF(G17="8:50:17 AM","start") and I can't figure out how to do it. Cell G17 is showing 8:50:17 AM.
View 9 Replies
View Related
Mar 10, 2009
How can I have a form field automatically fill some aspects of the data that's input? I've seen it before, like a phone# field automatically including the dashes.
I would like to automatically include colons in a time field. So if I were to type "081500" (or even "81500"), it would complete it as "08:15:00".
View 11 Replies
View Related
Oct 31, 2011
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code:
Dim chkConfirmRw, LastNameRow As Integer
For chkConfirmRw = LastNameRow To 1 Step -1
'Compare the current cell to the one below it
'If they don't match, insert a row row below the current Row
If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then
Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown
End If
'Decrement the counter and do it again
Next
but it does not work.
View 3 Replies
View Related
Feb 6, 2013
figuring out a formula to count the number of occurrences within a date range (the month of October) however, the date column is formatted to mm/d/yy 00:11:22 PM/AM.
I tried using =COUNTIFS(B4:B96,G3:G9611/1/2008) but got an error.
This is what I'm working with (there are other occurrences for Nov and Dec in the spreadsheet - this image only shows Oct)
Site Statistics
October-December 2008
Visitor
No.
IP
Address
Operating
System
Browser
Site
[code]....
View 6 Replies
View Related
Nov 7, 2013
I have 2 fields formatted like this:
1) Date: "30/10/2013"
2) Time: "10:56:39:000"
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
View 1 Replies
View Related
Feb 17, 2014
I have obtained the following data which I need to put into a spreadsheet to import into an accounts program. I can't change the way I get the data which is as follow
Hrs worked Rate
05:55:00£30.00/Hour
07:40:00£21.00/Hour
05:45:00£30.00/Hour
What I need to have is 5.92 30.00
7.67 21.00
5.75 30.00 ie the time format in decimal and loose all the unnecessary symbols etc for the rate
View 7 Replies
View Related
Nov 9, 2011
In the "Pivot Table Field List" I have the option to "Choose fields to add to report". I have a large number of fields that I want to choose and "Add to Values" - so it is tedious to select each item individually.My question: Is there any possible way select multiple fields at the same time? e.g.
a "select all" option, orhighlighting a range of the available fields (either by dragging or holding the shift key)I've looked / tried above with no luck.
Any Excel Add-Ins out there that might address this? I'm fearing not since my searches have come up empty.
View 4 Replies
View Related
