I use Vlookup's a lot so i define my range with specific names a lot. But when i want to clear the range names via Insert>Name>Define>"Select the range name then click delete. but instead of clicking on each range name, i would like to to delete all.
I can create a macro to do this but some days i use different range names that other days so the below will not work exactly.
Trying to use a Defined Name as the cell reference in VBA. The idea is to change the value of a couple of other cells base on the value of the cell "FreightRow". I am starting with a Message box just to make sure the code was reading the cell reference.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim FR As Range
Set FR = ThisWorkbook.Names("FreightRow").RefersTo
If FR = 3 Then
MsgBox ("Help")
End If
End Sub
Is it possible to use defined names from other workbooks? I would like to use this defined name as part of a VBA code.
Example: ActiveChart.SeriesCollection(1).Values = Range(Name1)
where Name1 is a defined name from a different workbook
I have a column J that is named Premium. If I use the function =INT(Premium) in K4 then it returns the integer for the value in J4. If I do the same thing with a UDF then the function argument receives all the values in column J. The author of the function says this is how UDFs work by design. Is there a way to use defined names with UDFs and have it work the way it does with built in functions?
View 5 Replies View RelatedIve created the following code which I want to use to create a name in excel but it doesnt work.
when i put =INDIRECT i get an error and with out the = it places a text string in with speech marks on it e.g. defined name reference in excel reads ="INDIRECT('Health and Safety'!$AP$3)"
How do I get rid of those speech marks? the cell reference will change each time the macro runs and so will the sheet reference.
myC = ActiveCell.Address
Dim strNAME As String
strNAME = "YAXIS" & "_" & "HS" & Chartnumber
strSHEET = ActiveSheet.Name
ActiveWorkbook.Worksheets(ActiveSheet.Name).Names.Add Name:=strNAME, _
RefersToR1C1:="INDIRECT('" & strSHEET & "'!" & myC & ")"
I am currently overhauling a massive workbook, that previously relied on an absurd amount of named ranges in order to run vlookups. I no longer need these named ranges and would like to delete them to unclog the workbook. Currently I only see a way to delete them one by one. Is there a way to mass delete all of them?
How to delete all defined names from a workbook
View 14 Replies View RelatedI have several SumIf formulas that references a Cell in a Main Reference Tab. This is useful to me as I have over 100 tabs of data points and having a reference cell with that text is easier to change one time vs 100 times.
My question is this: Will Defined Names be "faster" than using a reference cell? With over 100 tabs, there's a lot of formulas and I'm looking for a faster way to get the same output without Excel Memory overload.
Why can't I alphabetize all of my defined name ranges in the Name box?
View 8 Replies View RelatedThis thread is related to this thread. Offset, Match, Max Formula In the Insert - Name - Define window:
If one wants to copy a formula from the "Refers to" box and the formula extends past the right side of the box, how does one use "select all" or mark the whole formula from beginning to end so it can be copied without messing up the formula. At the moment, when I try this, it changes the formula to include the active cell of the worksheet that's open when I use the Ctrl + c etc. I have tried Ctrl + Ins and Ctrl + a and Ctrl + c. None of these are working for me.
I have a situation where I copy a worksheet to further on in the same workbook (essentially, using it as a template to create new sheets). I have certain cells that contain references to named ranges, e.g. on NewSheet1, cell $A$1 contains =StudyNo. Unfortunately, it shows as #NAME?. But, if I go to the formula bar and press enter, it resolves the name properly. I thougt maybe that automatic calculation was on manual but it is not. Why is this happening and what can I do to resolve it.
View 3 Replies View RelatedI want to be able populate a combobox with all defined ranges in the workbook?
View 4 Replies View RelatedI would really appreciate if someone could help me with the following problem:
I wrote this code, but for some reason it doesn't work. I am completely new to VBA and have no idea what went wrong:
as the title says, i need to rotate a range but to keep all defined names (single cell or range) consistent.
i.e.
lets say i have the following cells filled:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
now i have a few defined ranges. lets say:
range name, refers to
mycell1row1, A1
mycell90roanything, B1
mysomething, C1
mysomthingrange, A1:F1
etc.
what i need in the end is this:
1 1 1 1 1 1 1
2 2 2 2 2 2 2
3 3 3 3 3 3 3
4 4 4 4 4 4 4
and for defined names:
mycell1row1, A1
mycell90roanything, A2
mysomething, A3
mysomthingrange, A1:A7
I'm trying to use some defined names to create charts. Though it works at the very begin, some extremely weird things happen when I try to develop further .....
Attached please find the test file, which simplifies my real case but shows the same problem.
Test.xlsx
In the test file, three names are defined as below:
Line1: "=Xvalue*1"
Line2: "=Xvalue*2"
Xvalue: "=ROW(SampleChart!$A$1:$A$25)"
the chart is very sample: "=SERIES(,Test.xlsx!Xvalue,Test.xlsx!Line1,1)"
So far, it works very well. However, I just simply can't add the second line into the chart, for example, "=SERIES(,Test.xlsx!Xvalue,Test.xlsx!Line2,2)"
I canNOT even change "Line1" to "Line2" in the "SERIES" formula!
I am looking to create a formula which sums the values associated with several defined names. For example, I have a workbook with the following defined names SalesPerson1Total, SalesPerson2Total, etc. and these amounts are all sourced from multiple tabs. The amount of defined names (i.e. 'SalesPersons') is variable, therefore, I want the formula to read Sum the values of all defined names which are named with the following convention 'SalesPerson(X)Total'.
View 9 Replies View RelatedI have created 500+ defined names that refer to worksheets that do not exist (yet). When I add the previously nonexistent worksheets, the defined names that refer to them are not "live" and do not work in functions where that name is used. If you go into the defined names and click on the ones that refer to the now existent worksheet, they start to work, but I was hoping there was a way around this step (e.g. a simple macro that says "update all defined names").
I created all the names so that the person who will eventually be using this will only have to add an appropriately named worksheet and put the data in...then everything will automatically work. I do not think adding names is difficult, but the person who will be using this does, so I want to avoid that person mucking around in my names.
I'm trying to simplify a spreadsheet i've been given by defining names for certain values. I'm using Excel 2013. Is there any way to have all of the newly defined names I've created for cells automatically be inserted into all of the formulas that exist in the spreadsheet?
Example.
Old formula in one sheet of a workbook looks up a cell in another sheet with the value of ='sheet1!A1
I've given the value of cell A1 in Sheet1 a name of dgwd.
How do I get every formula in the workbook that references 'sheet1!A1 to change the value within that formula to dgwd?
I have given names to several cells and ranges in my excel sheet. I would like to know how I remove them. Secondly, is it possible to remove all names in the same time in order to gain time ?
View 3 Replies View RelatedI have sheet 2007 with 365 named ranges. the names are like "_20070225". I use an intersect procedure that converts the range name into "Sunday, February 25" and places it nicely in a label on a user form. To name the ranges on sheet 2007, my procedure used DateSerial (2007,1,1). I named another sheet 2008, changed the naming procedure to use DateSerial (2008,1,1), and while it works, the intersect procedure throws an error for either sheet. I assume it has something to do with hidden names, or the fact that all names for both sheets are in workbook.names.
Here is the intersect procedure that I call from sub Worksheet_SelectionChange(ByVal Target As Range)
Sub cellINBMs()
Dim nName As Name, str As String
str = ""
For Each nName In ActiveWorkbook.Names
If Not Intersect(Selection, Range(nName)) Is Nothing Then
str = str & nName.Name & ";"
End If
Next nName
If Len(str) <= 1 Then
str = ""
Else: str = Left(str, Len(str) - 1)
MANAGERCONTROLSFORM.SELECTEDDAYLABEL.Caption = Format(DateSerial(Mid(str, 2, 4), Mid(str, 6, 2), Right(str, 2)), "dddd, mmmm d")
End If
End Sub
I have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
Unfortunately we don't have 2010 at work so I don't have the luxury of the use of the duplicate function.
I'm using Excel 2003 and need to remove duplicate names from a list; what would be the best formula to do this.
I've done a countif to identify how many occurrences appear; any other formula if greater than to get to the object of how many staff I have in the list
I want to replace all defined range names in the sheet that start with "Street" to "Road"
For example I have 50 defined names in the sheet as such "Street-01", "Street-02"... all through "Street-50"
I want to change them all in vba to Road-01", "Road-02" etc.
I keep running into this error when I try to create a pivot table.
The debugger highlights the following line:
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6
'Code1
Call movedata(1, rrow, ecol, erow)
'Contact Person
Call movedata(26, rrow, ecol, erow)
Worksheets("new").Activate
Worksheets("new"). Range(Cells(erow, ecol), Cells(erow, (ecol - 2))).Font.Bold = True
'Name
Call movedata(2, rrow, ecol, erow)
'Street Address
Call movedata(3, rrow, ecol, erow)
'city
Call movedata(4, rrow, ecol, erow)
' zip
Call movedata(5, rrow, ecol, erow)
Worksheets("new").Range(Cells(erow, ecol)).Font.Bold = True
' speed dial
Call movedata(6, rrow, ecol, erow)
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
Trying to add a named range at run-time
Here's what I have so far ...
I have problems with setting Validation input title and message. When in column "C" I type product code, data validation of corresponding cell in column "D" changes to list of diameters allowed for that product. That works fine. But i also want to set validation message to show allowed diameters.I set it in VBA using named ranges.
But for every second line (13, 15, etc on attached file) I get an application-defined or object-defined error. The rest (14, 16 etc) works ok.
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I have a very strange problem in DEBUG mode, because i get this error "Application-defined or object-defined error" when referring to a cell and assigning it a value so it goes to my error handler and i have a Resume Next there. It continues to go through the code whilst continuing to go to the error handler but when i step out of the function it restarts again from the beginning on the called function and then on the second run of my code it seems to WORK!?! So i'm thinking what the hell is going on, it falls over and fails the first time round and works the second time round?
In free-run mode from excel i just get a #VALUE!