Remove Spaces From Chinese Characters
Jan 9, 2012
I am trying to do a vlookup. I receive a report that gives the data as hyperlinks. I run a macro to remove the hyperlinks. I'm then left with a name that i want to match using a vlookup to get other data. The names are Chinese characters. I have tried using trim and clean function but its still leaving a space after the name. If i fo in manually and delete the space at the end the vlookup works fine. How to remove the spaces? i have about 5000 rows.
学员名字EliteNumber刘传佳=TRIM(A2)=VLOOKUP(B2,Sheet3!B:D,3,FALSE)刘传佳=VLOOKUP(D2,Sheet3!B1:D3550,3,FALSE)刘传佳 =TRIM(A3)刘传佳=VLOOKUP(D3,Sheet3!B2:D3551,3,FALSE)钟才富 =TRIM(A4)钟才富=VLOOKUP(D4,Sheet3!B3:D3552,3,FALSE)张杰 =TRIM(A5)张杰=VLOOKUP(D5,Sheet3!B4:D3553,3,FALSE)
刘传佳刘传佳刘传佳2001425刘传佳 刘传佳 刘传佳2001425钟才富 钟才富 钟才富800857张杰 张杰 张杰#N/A
View 8 Replies
ADVERTISEMENT
Mar 19, 2013
I need a formula to use on MS Excel 2007 to remove the English letters from a cell A1 and return only the numbers(if any) & Chinese characters to B1.
Please refer to the able below.
Example:
A
B
1
so l首先欢迎大家收听我们的科学与烹饪系列
首先欢迎大家收听我们的科学与烹饪系列
2
讲座的最后一次报告 有点难过这是最后一次了
讲座的最后一次报告 有点难过这是最后一次了
[Code]...
View 7 Replies
View Related
Oct 12, 2013
Initially I'm simply copying a data table from a web page using "Ctrl + A" then "Ctrl + C", and then pasting the data straight onto a new worksheet so I can work with it. (After temporarily re-naming the old sheet)
But I keep finding what looks like double-spaces after some of the important text within the Range of cells I'm working with. I need to be able to select & conditional format the values of the text in some columns of the sheet, so need to loose these trailing spaces.
Unfortunately, it's not consistence as to how many spaces trail the text I need. Sometimes it's only one space, sometimes its two spaces ?
So far, I've had mixed success with a recorded "Replace" code but none of the other codes I have found on forum pages either don't work all or seem to give any consistent results. E;g; TRIM, CLEAN
I suspect my problem is, I do not know how to call the code properly, or trying to work with too large a range ?
The start of my code reads:
Code:
Sheets("Data").Select
Sheets("Data").Name = "Old Data"
Sheets.Add After:=Sheets(Sheets.Count)
Sheets(Sheets.Count).Select
ActiveSheet.Name = "Data"
[Code]...
' At the moment I'm using to select the pasted range I want to work on: Range(Range("C46"), Range("C46").SpecialCells(xlLastCell)).Select
This is where I need a code to work on the new Data sheet and remove all the trailing characters.
MsgBox "All data cleaned successfully !", vbInformation + vbOKOnly, "All Done"
View 3 Replies
View Related
Aug 8, 2009
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post Removing Non-alpha Characters From Text).
Option Explicit
Private Function RemoveCharacters(InString As String) As String
Dim intLoopCounter As Integer
Dim intStringLength As Integer
Dim intASCIIVal As Integer
intStringLength = Len(InString)
InString = LCase(InString)
For intLoopCounter = 1 To intStringLength
intASCIIVal = Asc(Mid(InString, intLoopCounter, 1))
If intASCIIVal >= 97 And intASCIIVal <= 122 Then
RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1)
End If
Next intLoopCounter
End Function
Two requests:
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument 1 would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? blankor 0would exclude these numbers, i.e. would return "nlgahighstreeten"
View 5 Replies
View Related
Dec 10, 2011
A range of cells contain characters that i want to replace with spaces. The problem is that the length of the string differs and also the characters differ.
For example, below a list of cell values:
GR
GRKR
GRKRKR
GRKRK1
GRON
GRONBL
As a result for the first value i want 2 spaces, for the second one 4 spaces etc.
Is it possible to do this with a formula? I don't want to use VBA for this if possible...
View 5 Replies
View Related
May 26, 2009
i have data which has lots of these hyphen "-" how can i get rid of them,
for example -Eq Cash-
i need the result to be
Eq Cash
Also i have lots of front spaces in my data, how can i get rid of those? so for example
Test (there is 2 spaces before T)
View 9 Replies
View Related
Feb 26, 2009
I have a cel that has about 100,000 phone numbers and at the end of some and before sum, there are spaces added to end. is there a formula, or a way to take everything away except for the 10 digit number?
View 5 Replies
View Related
Dec 11, 2007
I am trying to remove spaces in front of a number (currently formatted as text)
I have tried "Text to Columns", "Trim", and other suggestions in previously threads.
I have copied bank statement amounts from an e-mail and the $ amounts have one Space in front of them. When I use the Trim function, and then a paste special, I still cannot get rid of the space, and so cannot add up the amounts in this column.
Ex:
*7 Dec 2007*DEPOSIT*3,917.63
*7 Dec 2007*DEPOSIT*1,890.58
View 9 Replies
View Related
Sep 26, 2012
I have a worksheet that contains lots of value. I want to run quick calculation on it but for some reason counta function counts blank cells.
I checked and the cells with =len() and it returns a number > 1
What is the proper way to clean the whole worksheet with some copy paste value and get rid of invisible character like space or nonprintable ones to be sure to get the right number of cells with value?
View 9 Replies
View Related
Sep 18, 2013
I have a column of data in which each cell contains a line of text. Each line of text has spaces after the letters end and there doesn't seem to be a consistent number of trailing spaces.
I can clean up the data using the TRIM function but is it possible to use the TEXT TO COLUMNS functionality?
View 2 Replies
View Related
Aug 28, 2009
See attached. I want to use column A to create column B (the expected result) by way of a formula. Index?
View 6 Replies
View Related
Jan 23, 2008
I need VBA to remove all punctuation and spaces from cells. What I want is to do this from the same columns every spreadhseet that I open and when it gets to row 700 to stop. So I guess a range for this example could be A1:B700.
View 9 Replies
View Related
Sep 24, 2006
I have an excel file with two sheets . One containing the updated prices with its code ( Sheet1) and the other containing the old prices with the same codes (sheet2). Now after several trials to copy the new prices from sheet 1 to sheet 2 with check if the code is same . ( I couldn't )
So how to get rid of the 20 spaces from Sheet1 column A.
View 9 Replies
View Related
Oct 29, 2006
I have written a function which works in the same way as the concatenate formula but where required it uses an underscore to make up the length (14 Characters) of the result. I seem however to have hit a minor snag when users input trailing spaces. I thought I could use trim to eliminate them but it doesnt seem to be working
Function HypCon(CorpAcct, Subdiv)
Dim n, i, iLen, iLen2 As Integer
Dim sCorpAcct, sSubdiv As String
Dim iLen3, iLen4 As Integer
iLen = Len(Trim(CorpAcct))
iLen2 = 7
iLen3 = Len(Trim(Subdiv))
iLen4 = 5..............
View 9 Replies
View Related
Jul 8, 2007
I wrote numbers in column b cells in disordered way :
1
.. 1
1
.... 1
.. 1
1
I would like to make them to be aligned in the left side by a code.
View 9 Replies
View Related
Jul 20, 2007
I convert a .pdf report to excel using Able2Extract. The output is leaving some xtra spaces inside the word. For example,
Clean in g Co st
I tried running Dave McRitchie's Trimall on the text, Sample workbook attached
View 6 Replies
View Related
Aug 17, 2007
I'm trying to use the SUBSTITUTE function to remove spaces from my cells in column A. The trouble is My formula is removing all the spaces from the cell. My formula is: SUBSTITUTE(A1," ","")
I do however have many cells that contain a space between characters 5 and 7 and spaces at the end of the cell which have been padded out to 15 characters long.Its only the spaces at the end of the cells I need to remove.
View 3 Replies
View Related
Jan 25, 2008
I have a macro that I run after selecting a column which removes spaces. However, it processes all 65536 rows and I only want it to process the cells with values. I need to enter into an input a column and then it just removes spaces from the cells with values
Sub NoSpaces()
Dim c As Range
For Each c In Selection.Cells
c = Replace(c, " ", "")
Next
End Sub
View 3 Replies
View Related
Oct 8, 2009
I would like to sort words or data which has the First capital letter, words which has spaces and words which contains number... i have attached a sample file.
View 9 Replies
View Related
Mar 31, 2009
If I have ABC DEF in a1, is there a formula I can put in a2 to remove the space and display ABCDEF
View 2 Replies
View Related
Jun 8, 2013
In Column A, I have several rows of data. Some cells contain numbers and some contain text and some are blank. In Column C, I only want the numbers in Column A. I do not want the text and I cannot have any gaps in the column.
So for example:
Column A: row 1: 456 row 2: 789 row 3: text row 4: text row 5: 398 row 6: text row 7: blank row 8: 124
in Column C I need:
row 1: 456 row 2: 789 row 3: 398 row 4: 124
View 10 Replies
View Related
May 18, 2011
I have in a range several numbers that contain extra spaces and therefore these are recognized as text.
This is how the numbers would look : " 123.234.567"
How to remove the extra spaces and the points (as otherwise this will also be recognized as text)?
View 9 Replies
View Related
Mar 28, 2009
The below code removes trailing spaces, but for some reason it does not remove space from this, i clicked F2 and the space is still there, why does it work on some but not others?
98956P102
Sub test()
With ActiveSheet.UsedRange
.Value = Evaluate("if(" & .address & """"",trim(" & .address & "),"""")")
End With
End Sub
View 9 Replies
View Related
Jan 5, 2007
I am doing a vlookup on fields such as 02-0223. In one table, there is a space at the end of 02-0223 and in the other table, there is no space. How can I delete the space so the numbers match in vlookup?
View 7 Replies
View Related
Apr 15, 2008
I use a program that can export data into Excel. For the most part, it works fine. except it doesn't correctly handle dates. For some reason, when it pastes a date into excel it includes 8 or 9 (depending if the month is 1 or 2 digits) spaces in front of the date which makes calculations with these dates impossible unless you go into each cell and delete the spaces (or do Find / Replace).
Is there a way I can create a non-VBA formula that will reference any one of these cells and some how identify what the date is & then that cell can be the date I can calc on? I.e., A1 is the date with the spaces in front, B2 is the cell that will reference A1 and produce, as the contents of B2, the date in A1. I can then use B2 in calculations.
Note: the month formats possible are: M/DD/YY (Jan. - Sept.) & MM/DD/YY (Oct. - Dec.). There are no other variations.
View 8 Replies
View Related
Oct 8, 2012
Excel 2007.I have a list of postcodes (UK) which have different lengths of characters (including spaces) from 6-8, however our system seems to add additional spaces inbetween the postcode, so it could have upto 11/12 characters (inc spaces) Below is what could come out:
EH21 6PQ - 1 Space (8 Char)
EH12 9HG - 3 Spaces (10 Char)
E1 8DF - 3 Spaces (8 Char)
LL5 1GH - 2 Spaces (8 Char)
L5 1FG - 1 Space (6 Char)
What I need is a formula to ensure each postcode only has 8 characters by inserting spaces between if there's less than 8 char and trimming if there's more than 8 char
So from the above postcodes the desired results would be:
EH21 6PQ - 1 Space (8 Char) - This would be correct
EH12 9HG - 3 Spaces (10 Char) - Trim off 2 spaces from the middle
E1 8DF - 3 Spaces (8 Char) - This would be correct
LL5 1GH - 2 Spaces (8 Char) - This would be correct
L5 1FG - 1 Space (6 Char) - Insert 2 spaces in the middle
View 9 Replies
View Related
Jun 23, 2014
I am trying to use the trim function to remove unwanted spaces at the beginning of cells that contain an address. The entire column contains spaces prior to the street number/name.
View 14 Replies
View Related
Dec 5, 2013
Any easy way to remove all spaces from a cell, both leading and trailing? I find it hard to believe that Excel doesn't have this functionality. I don't particulary want to write a VBA script since I have never done it but if that's the only way, I'd love to know how to write it. I have looked everywhere but obviously not in the right places.
View 4 Replies
View Related
Jan 29, 2013
I would like to remove spaces and utilize the alt+enter command - - I am more worried about removing the spaces than anything else at the moment.
Example:
D-1173-G-00002 D-1173-G-00065
D-1173-G-00002 D-1173-G-00065
D-1173-G-00045 D-1173-G-00064
Note: The spacing between these are not common throughout my entire column.
What I am looking for:
Example:
D-1173-G-00002
D-1173-G-00065
Example:
D-1173-G-00045
D-1173-G-00064
View 4 Replies
View Related
Oct 16, 2013
how to remove multiple leading and trailing spaces while leave spaces in the middle of the string in place? I have tried text to columns but this does not remove the multiple spaces.
View 9 Replies
View Related
